8 research outputs found

    Complements and signed digit representations: Analysis of a multi-exponentiation-algorithm of Wu, Lou, Lai and Chang

    Full text link
    Wu, Lou, Lai and Chang proposed a multi-exponentiation algorithm using binary complements and the non-adjacent form. The purpose of this paper is to show that neither the analysis of the algorithm given by its original proposers nor that by other authors are correct. In fact it turns out that the complement operation does not have significant influence on the performance of the algorithm and can therefore be omitted

    Cryptography for Ultra-Low Power Devices

    Get PDF
    Ubiquitous computing describes the notion that computing devices will be everywhere: clothing, walls and floors of buildings, cars, forests, deserts, etc. Ubiquitous computing is becoming a reality: RFIDs are currently being introduced into the supply chain. Wireless distributed sensor networks (WSN) are already being used to monitor wildlife and to track military targets. Many more applications are being envisioned. For most of these applications some level of security is of utmost importance. Common to WSN and RFIDs are their severely limited power resources, which classify them as ultra-low power devices. Early sensor nodes used simple 8-bit microprocessors to implement basic communication, sensing and computing services. Security was an afterthought. The main power consumer is the RF-transceiver, or radio for short. In the past years specialized hardware for low-data rate and low-power radios has been developed. The new bottleneck are security services which employ computationally intensive cryptographic operations. Customized hardware implementations hold the promise of enabling security for severely power constrained devices. Most research groups are concerned with developing secure wireless communication protocols, others with designing efficient software implementations of cryptographic algorithms. There has not been a comprehensive study on hardware implementations of cryptographic algorithms tailored for ultra-low power applications. The goal of this dissertation is to develop a suite of cryptographic functions for authentication, encryption and integrity that is specifically fashioned to the needs of ultra-low power devices. This dissertation gives an introduction to the specific problems that security engineers face when they try to solve the seemingly contradictory challenge of providing lightweight cryptographic services that can perform on ultra-low power devices and shows an overview of our current work and its future direction

    Computer designing and programming Final report

    Get PDF
    Computer designing and programmin

    The Fifth NASA Symposium on VLSI Design

    Get PDF
    The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

    The 1992 4th NASA SERC Symposium on VLSI Design

    Get PDF
    Papers from the fourth annual NASA Symposium on VLSI Design, co-sponsored by the IEEE, are presented. Each year this symposium is organized by the NASA Space Engineering Research Center (SERC) at the University of Idaho and is held in conjunction with a quarterly meeting of the NASA Data System Technology Working Group (DSTWG). One task of the DSTWG is to develop new electronic technologies that will meet next generation electronic data system needs. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The NASA SERC is proud to offer, at its fourth symposium on VLSI design, presentations by an outstanding set of individuals from national laboratories, the electronics industry, and universities. These speakers share insights into next generation advances that will serve as a basis for future VLSI design

    The Telecommunications and Data Acquisition Report

    Get PDF
    This quarterly publication (July-Sept. 1986) provides archival reports on developments in programs managed by JPL's Office of Telecommunications and Data Acquisition (TDA). In space communications, radio navigation, radio science, and ground-based radio astronomy, it reports on activities of the Deep Space Network (DSN) and its associated Ground Communications Facility (GCF) in planning, in supporting research and technology, in implementation, and in operations. This work is performed for NASA's Office of Space Tracking and Data Systems (OSTDS). In geodynamics, the publication reports on the application of radio interferometry at microwave frequencies for geodynamic measurements. In the search for extraterrestrial intelligence (SETI), it reports on implementation and operations for searching the microwave spectrum. The latter two programs are performed for NASA's Office of Space Science and Applications (OSSA)

    Layoutautomatisierung im analogen IC-Entwurf mit formalisiertem und nicht-formalisiertem Expertenwissen

    Get PDF
    After more than three decades of electronic design automation, most layouts for analog integrated circuits are still handcrafted in a laborious manual fashion today. Obverse to the highly automated synthesis tools in the digital domain (coping with the quantitative difficulty of packing more and more components onto a single chip – a desire well known as More Moore), analog layout automation struggles with the many diverse and heavily correlated functional requirements that turn the analog design problem into a More than Moore challenge. Facing this qualitative complexity, seasoned layout engineers rely on their comprehensive expert knowledge to consider all design constraints that uncompromisingly need to be satisfied. This usually involves both formally specified and nonformally communicated pieces of expert knowledge, which entails an explicit and implicit consideration of design constraints, respectively. Existing automation approaches can be basically divided into optimization algorithms (where constraint consideration occurs explicitly) and procedural generators (where constraints can only be taken into account implicitly). As investigated in this thesis, these two automation strategies follow two fundamentally different paradigms denoted as top-down automation and bottom-up automation. The major trait of top-down automation is that it requires a thorough formalization of the problem to enable a self-intelligent solution finding, whereas a bottom-up automatism –controlled by parameters– merely reproduces solutions that have been preconceived by a layout expert in advance. Since the strengths of one paradigm may compensate the weaknesses of the other, it is assumed that a combination of both paradigms –called bottom-up meets top-down– has much more potential to tackle the analog design problem in its entirety than either optimization-based or generator-based approaches alone. Against this background, the thesis at hand presents Self-organized Wiring and Arrangement of Responsive Modules (SWARM), an interdisciplinary methodology addressing the design problem with a decentralized multi-agent system. Its basic principle, similar to the roundup of a sheep herd, is to let responsive mobile layout modules (implemented as context-aware procedural generators) interact with each other inside a user-defined layout zone. Each module is allowed to autonomously move, rotate and deform itself, while a supervising control organ successively tightens the layout zone to steer the interaction towards increasingly compact (and constraint compliant) layout arrangements. Considering various principles of self-organization and incorporating ideas from existing decentralized systems, SWARM is able to evoke the phenomenon of emergence: although each module only has a limited viewpoint and selfishly pursues its personal objectives, remarkable overall solutions can emerge on the global scale. Several examples exhibit this emergent behavior in SWARM, and it is particularly interesting that even optimal solutions can arise from the module interaction. Further examples demonstrate SWARM’s suitability for floorplanning purposes and its application to practical place-and-route problems. The latter illustrates how the interacting modules take care of their respective design requirements implicitly (i.e., bottom-up) while simultaneously paying respect to high level constraints (such as the layout outline imposed top-down by the supervising control organ). Experimental results show that SWARM can outperform optimization algorithms and procedural generators both in terms of layout quality and design productivity. From an academic point of view, SWARM’s grand achievement is to tap fertile virgin soil for future works on novel bottom-up meets top-down automatisms. These may one day be the key to close the automation gap in analog layout design.Nach mehr als drei Jahrzehnten Entwurfsautomatisierung werden die meisten Layouts für analoge integrierte Schaltkreise heute immer noch in aufwändiger Handarbeit entworfen. Gegenüber den hochautomatisierten Synthesewerkzeugen im Digitalbereich (die sich mit dem quantitativen Problem auseinandersetzen, mehr und mehr Komponenten auf einem einzelnen Chip unterzubringen – bestens bekannt als More Moore) kämpft die analoge Layoutautomatisierung mit den vielen verschiedenen und stark korrelierten funktionalen Anforderungen, die das analoge Entwurfsproblem zu einer More than Moore Herausforderung machen. Angesichts dieser qualitativen Komplexität bedarf es des umfassenden Expertenwissens erfahrener Layouter um sämtliche Entwurfsconstraints, die zwingend eingehalten werden müssen, zu berücksichtigen. Meist beinhaltet dies formal spezifiziertes als auch nicht-formal übermitteltes Expertenwissen, was eine explizite bzw. implizite Constraint Berücksichtigung nach sich zieht. Existierende Automatisierungsansätze können grundsätzlich unterteilt werden in Optimierungsalgorithmen (wo die Constraint Berücksichtigung explizit erfolgt) und prozedurale Generatoren (die Constraints nur implizit berücksichtigen können). Wie in dieser Arbeit eruiert wird, folgen diese beiden Automatisierungsstrategien zwei grundlegend unterschiedlichen Paradigmen, bezeichnet als top-down Automatisierung und bottom-up Automatisierung. Wesentliches Merkmal der top-down Automatisierung ist die Notwendigkeit einer umfassenden Problemformalisierung um eine eigenintelligente Lösungsfindung zu ermöglichen, während ein bottom-up Automatismus –parametergesteuert– lediglich Lösungen reproduziert, die vorab von einem Layoutexperten vorgedacht wurden. Da die Stärken des einen Paradigmas die Schwächen des anderen ausgleichen können, ist anzunehmen, dass eine Kombination beider Paradigmen –genannt bottom-up meets top down– weitaus mehr Potenzial hat, das analoge Entwurfsproblem in seiner Gesamtheit zu lösen als optimierungsbasierte oder generatorbasierte Ansätze für sich allein. Vor diesem Hintergrund stellt die vorliegende Arbeit Self-organized Wiring and Arrangement of Responsive Modules (SWARM) vor, eine interdisziplinäre Methodik, die das Entwurfsproblem mit einem dezentralisierten Multi-Agenten-System angeht. Das Grundprinzip besteht darin, ähnlich dem Zusammentreiben einer Schafherde, reaktionsfähige mobile Layoutmodule (realisiert als kontextbewusste prozedurale Generatoren) in einer benutzerdefinierten Layoutzone interagieren zu lassen. Jedes Modul darf sich selbständig bewegen, drehen und verformen, wobei ein übergeordnetes Kontrollorgan die Zone schrittweise verkleinert, um die Interaktion auf zunehmend kompakte (und constraintkonforme) Layoutanordnungen hinzulenken. Durch die Berücksichtigung diverser Selbstorganisationsgrundsätze und die Einarbeitung von Ideen bestehender dezentralisierter Systeme ist SWARM in der Lage, das Phänomen der Emergenz hervorzurufen: obwohl jedes Modul nur eine begrenzte Sichtweise hat und egoistisch seine eigenen Ziele verfolgt, können sich auf globaler Ebene bemerkenswerte Gesamtlösungen herausbilden. Mehrere Beispiele veranschaulichen dieses emergente Verhalten in SWARM, wobei besonders interessant ist, dass sogar optimale Lösungen aus der Modulinteraktion entstehen können. Weitere Beispiele demonstrieren SWARMs Eignung zwecks Floorplanning sowie die Anwendung auf praktische Place-and-Route Probleme. Letzteres verdeutlicht, wie die interagierenden Module ihre jeweiligen Entwurfsanforderungen implizit (also: bottom-up) beachten, während sie gleichzeitig High-Level-Constraints berücksichtigen (z.B. die Layoutkontur, die top-down vom übergeordneten Kontrollorgan auferlegt wird). Experimentelle Ergebnisse zeigen, dass Optimierungsalgorithmen und prozedurale Generatoren von SWARM sowohl bezüglich Layoutqualität als auch Entwurfsproduktivität übertroffen werden können. Aus akademischer Sicht besteht SWARMs große Errungenschaft in der Erschließung fruchtbaren Neulands für zukünftige Arbeiten an neuartigen bottom-up meets top-down Automatismen. Diese könnten eines Tages der Schlüssel sein, um die Automatisierungslücke im analogen Layoutentwurf zu schließen

    Neurath Reconsidered: New Sources and Perspectives

    Get PDF
    corecore