Fast, predictable and low energy memory references through architecture-aware compilation

The design of future high-performance embedded systems is hampered by two problems: First, the required hardware needs more energy than is available from batteries. Second, current cache-based approaches for bridging the increasing speed gap between processors and memories cannot guarantee predictable real-time behavior. A contribution to solving both problems is made in this paper which describes a comprehensive set of algorithms that can be applied at design time in order to maximally exploit scratch pad memories (SPMs). We show that both the energy consumption as well as the computed worst case execution time (WCET) can be reduced by up to to 80% and 48%, respectively, by establishing a strong link between the memory architecture and the compiler

Interposing Flash between Disk and DRAM to Save Energy for Streaming Workloads

In computer systems, the storage hierarchy, composed of a disk drive and a DRAM, is responsible for a large portion of the total energy consumed. This work studies the energy merit of interposing flash memory as a streaming buffer between the disk drive and the DRAM. Doing so, we extend the spin-off period of the disk drive and cut down on the DRAM capacity at the cost of (extra) flash.\ud \ud We study two different streaming applications: mobile multimedia players and media servers. Our simulated results show that for light workloads, a system with a flash as a buffer between the disk and the DRAM consumes up to 40% less energy than the same system without a flash buffer. For heavy workloads savings of at least 30% are possible. We also address the wear-out of flash and present a simple solution to extend its lifetime

Safety-related challenges and opportunities for GPUs in the automotive domain

GPUs have been shown to cover the computing performance needs of autonomous driving (AD) systems. However, since the GPUs used for AD build on designs for the mainstream market, they may lack fundamental properties for correct operation under automotive's safety regulations. In this paper, we analyze some of the main challenges in hardware and software design to embrace GPUs as the reference computing solution for AD, with the emphasis in ISO 26262 functional safety requirements.Authors would like to thank Guillem Bernat from Rapita Systems for his technical feedback on this work. The research leading to this work has received funding from the European Re-search Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 772773). This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant TIN2015-65316-P and the HiPEAC Network of Excellence. Jaume Abella has been partially supported by the Ministry of Economy and Competitiveness under Ramon y Cajal postdoctoral fellowship number RYC-2013-14717. Carles Hernández is jointly funded by the Spanish Ministry of Economy and Competitiveness and FEDER funds through grant TIN2014-60404-JIN.Peer ReviewedPostprint (author's final draft

Optimizing the flash-RAM energy trade-off in deeply embedded systems

Deeply embedded systems often have the tightest constraints on energy consumption, requiring that they consume tiny amounts of current and run on batteries for years. However, they typically execute code directly from flash, instead of the more energy efficient RAM. We implement a novel compiler optimization that exploits the relative efficiency of RAM by statically moving carefully selected basic blocks from flash to RAM. Our technique uses integer linear programming, with an energy cost model to select a good set of basic blocks to place into RAM, without impacting stack or data storage. We evaluate our optimization on a common ARM microcontroller and succeed in reducing the average power consumption by up to 41% and reducing energy consumption by up to 22%, while increasing execution time. A case study is presented, where an application executes code then sleeps for a period of time. For this example we show that our optimization could allow the application to run on battery for up to 32% longer. We also show that for this scenario the total application energy can be reduced, even if the optimization increases the execution time of the code

Temporal-Aware Mechanism to Detect Private Data in Chip Multiprocessors

© 2013 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Most of the data referenced by sequential and parallel applications running in current chip multiprocessors are referenced by only one thread and can be considered as private data. A lot of recent proposals leverage this observation to improve many aspects of chip multiprocessors, such as reducing coherence overhead or the access latency to distributed caches. The effectiveness of those proposals depend to a large extent on the amount of detected private data. However, the mechanisms proposed so far do not consider thread migration and the private use of data within different application phases. As a result, a considerable amount of data is not detected as private. In order to make this detection more accurate and reaching more significant improvements, we propose a mechanism that is able to account for both thread migration and private data within application phases. Simulation results for 16-core systems show that, thanks to our mechanism, the average number of pages detected as private significantly increases from 43% in previous proposals up to 74% in ours. Finally, when our detection mechanism is used to deactivate the coherence for private data in a directory protocol, our proposal improves execution time by 13% with respect to previous proposals.This work was supported by the Spanish MINECO, as well as European Commission FEDER funds, under grant TIN2012-38341-C04-01/03 and by the VIRTICAL project (grant agreement no 288574) which is funded by the European Commission within the Research Programme FP7.Ros Bardisa, A.; Cuesta Sáez, BA.; Gómez Requena, ME.; Robles Martínez, A.; Duato Marín, JF. (2013). Temporal-Aware Mechanism to Detect Private Data in Chip Multiprocessors. En Proceedings of the International Conference on Parallel Processing. IEEE. 562-571. https://doi.org/10.1109/ICPP.2013.70S56257

Power estimation on functional level for programmable processors

In diesem Beitrag werden verschiedene Ansätze zur Verlustleistungsschätzung von programmierbaren Prozessoren vorgestellt und bezüglich ihrer Übertragbarkeit auf moderne Prozessor-Architekturen wie beispielsweise Very Long Instruction Word (VLIW)-Architekturen bewertet. Besonderes Augenmerk liegt hierbei auf dem Konzept der sogenannten Functional-Level Power Analysis (FLPA). Dieser Ansatz basiert auf der Einteilung der Prozessor-Architektur in funktionale Blöcke wie beispielsweise Processing-Unit, Clock-Netzwerk, interner Speicher und andere. Die Verlustleistungsaufnahme dieser Bl¨ocke wird parameterabhängig durch arithmetische Modellfunktionen beschrieben. Durch automatisierte Analyse von Assemblercodes des zu schätzenden Systems mittels eines Parsers können die Eingangsparameter wie beispielsweise der erzielte Parallelitätsgrad oder die Art des Speicherzugriffs gewonnen werden. Dieser Ansatz wird am Beispiel zweier moderner digitaler Signalprozessoren durch eine Vielzahl von Basis-Algorithmen der digitalen Signalverarbeitung evaluiert. Die ermittelten Schätzwerte für die einzelnen Algorithmen werden dabei mit physikalisch gemessenen Werten verglichen. Es ergibt sich ein sehr kleiner maximaler Schätzfehler von 3%.</p><p style=&quot;line-height: 20px;&quot;> In this contribution different approaches for power estimation for programmable processors are presented and evaluated concerning their capability to be applied to modern digital signal processor architectures like e.g. Very Long InstructionWord (VLIW) -architectures. Special emphasis will be laid on the concept of so-called Functional-Level Power Analysis (FLPA). This approach is based on the separation of the processor architecture into functional blocks like e.g. processing unit, clock network, internal memory and others. The power consumption of these blocks is described by parameter dependent arithmetic model functions. By application of a parser based automized analysis of assembler codes of the systems to be estimated the input parameters of the Correspondence to: H. Blume ([email protected]) arithmetic functions like e.g. the achieved degree of parallelism or the kind and number of memory accesses can be computed. This approach is exemplarily demonstrated and evaluated applying two modern digital signal processors and a variety of basic algorithms of digital signal processing. The resulting estimation values for the inspected algorithms are compared to physically measured values. A resulting maximum estimation error of 3% is achieved