3,468 research outputs found
Fast, Accurate Thin-Structure Obstacle Detection for Autonomous Mobile Robots
Safety is paramount for mobile robotic platforms such as self-driving cars
and unmanned aerial vehicles. This work is devoted to a task that is
indispensable for safety yet was largely overlooked in the past -- detecting
obstacles that are of very thin structures, such as wires, cables and tree
branches. This is a challenging problem, as thin objects can be problematic for
active sensors such as lidar and sonar and even for stereo cameras. In this
work, we propose to use video sequences for thin obstacle detection. We
represent obstacles with edges in the video frames, and reconstruct them in 3D
using efficient edge-based visual odometry techniques. We provide both a
monocular camera solution and a stereo camera solution. The former incorporates
Inertial Measurement Unit (IMU) data to solve scale ambiguity, while the latter
enjoys a novel, purely vision-based solution. Experiments demonstrated that the
proposed methods are fast and able to detect thin obstacles robustly and
accurately under various conditions.Comment: Appeared at IEEE CVPR 2017 Workshop on Embedded Visio
Viewfinder: final activity report
The VIEW-FINDER project (2006-2009) is an 'Advanced Robotics' project that seeks to apply a semi-autonomous robotic system to inspect ground safety in the event of a fire. Its primary aim is to gather data (visual and chemical) in order to assist rescue personnel. A base station combines the gathered information with information retrieved from off-site sources.
The project addresses key issues related to map building and reconstruction, interfacing local command information with external sources, human-robot interfaces and semi-autonomous robot navigation.
The VIEW-FINDER system is a semi-autonomous; the individual robot-sensors operate autonomously within the limits of the task assigned to them, that is, they will autonomously navigate through and inspect an area. Human operators monitor their operations and send high level task requests as well as low level commands through the interface to any nodes in the entire system. The human interface has to ensure the human supervisor and human interveners are provided a reduced but good and relevant overview of the ground and the robots and human rescue workers therein
Airborne chemical sensing with mobile robots
Airborne chemical sensing with mobile robots has been an active research areasince the beginning of the 1990s. This article presents a review of research work in this field,including gas distribution mapping, trail guidance, and the different subtasks of gas sourcelocalisation. Due to the difficulty of modelling gas distribution in a real world environmentwith currently available simulation techniques, we focus largely on experimental work and donot consider publications that are purely based on simulations
Past, Present, and Future of Simultaneous Localization And Mapping: Towards the Robust-Perception Age
Simultaneous Localization and Mapping (SLAM)consists in the concurrent
construction of a model of the environment (the map), and the estimation of the
state of the robot moving within it. The SLAM community has made astonishing
progress over the last 30 years, enabling large-scale real-world applications,
and witnessing a steady transition of this technology to industry. We survey
the current state of SLAM. We start by presenting what is now the de-facto
standard formulation for SLAM. We then review related work, covering a broad
set of topics including robustness and scalability in long-term mapping, metric
and semantic representations for mapping, theoretical performance guarantees,
active SLAM and exploration, and other new frontiers. This paper simultaneously
serves as a position paper and tutorial to those who are users of SLAM. By
looking at the published research with a critical eye, we delineate open
challenges and new research issues, that still deserve careful scientific
investigation. The paper also contains the authors' take on two questions that
often animate discussions during robotics conferences: Do robots need SLAM? and
Is SLAM solved
Semantically-enhanced Deep Collision Prediction for Autonomous Navigation using Aerial Robots
This paper contributes a novel and modularized learning-based method for
aerial robots navigating cluttered environments containing hard-to-perceive
thin obstacles without assuming access to a map or the full pose estimation of
the robot. The proposed solution builds upon a semantically-enhanced
Variational Autoencoder that is trained with both real-world and simulated
depth images to compress the input data, while preserving semantically-labeled
thin obstacles and handling invalid pixels in the depth sensor's output. This
compressed representation, in addition to the robot's partial state involving
its linear/angular velocities and its attitude are then utilized to train an
uncertainty-aware 3D Collision Prediction Network in simulation to predict
collision scores for candidate action sequences in a predefined motion
primitives library. A set of simulation and experimental studies in cluttered
environments with various sizes and types of obstacles, including multiple
hard-to-perceive thin objects, were conducted to evaluate the performance of
the proposed method and compare against an end-to-end trained baseline. The
results demonstrate the benefits of the proposed semantically-enhanced deep
collision prediction for learning-based autonomous navigation.Comment: 8 Pages, 8 figures. Accepted to the IEEE/RSJ International Conference
on Intelligent Robots and Systems 202
Autonomous 3D Exploration of Large Structures Using an UAV Equipped with a 2D LIDAR
This paper addressed the challenge of exploring large, unknown, and unstructured
industrial environments with an unmanned aerial vehicle (UAV). The resulting system combined
well-known components and techniques with a new manoeuvre to use a low-cost 2D laser to measure
a 3D structure. Our approach combined frontier-based exploration, the Lazy Theta* path planner, and
a flyby sampling manoeuvre to create a 3D map of large scenarios. One of the novelties of our system
is that all the algorithms relied on the multi-resolution of the octomap for the world representation.
We used a Hardware-in-the-Loop (HitL) simulation environment to collect accurate measurements
of the capability of the open-source system to run online and on-board the UAV in real-time. Our
approach is compared to different reference heuristics under this simulation environment showing
better performance in regards to the amount of explored space. With the proposed approach, the UAV
is able to explore 93% of the search space under 30 min, generating a path without repetition that
adjusts to the occupied space covering indoor locations, irregular structures, and suspended obstaclesUnión Europea Marie Sklodowska-Curie 64215Unión Europea MULTIDRONE (H2020-ICT-731667)Uniión Europea HYFLIERS (H2020-ICT-779411
Fast and robust 3D feature extraction from sparse point clouds
Matching 3D point clouds, a critical operation in map building and localization, is difficult with Velodyne-type sensors due to the sparse and non-uniform point clouds that they produce. Standard methods from dense 3D point clouds are generally not effective. In this paper, we describe a featurebased approach using Principal Components Analysis (PCA) of neighborhoods of points, which results in mathematically principled line and plane features. The key contribution in this work is to show how this type of feature extraction can be done efficiently and robustly even on non-uniformly sampled point clouds. The resulting detector runs in real-time and can be easily tuned to have a low false positive rate, simplifying data association. We evaluate the performance of our algorithm on an autonomous car at the MCity Test Facility using a Velodyne HDL-32E, and we compare our results against the state-of-theart NARF keypoint detector. © 2016 IEEE
Mechatronic Systems
Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools
- …