14,972 research outputs found
Simulation model for AGVS in production environments considering the Facility Layout Problem
In flexible manufacturing systems, an automated guided vehicle (AGV) is often used for material transport. To simulate this transport system, a production environment with aisles and transfer points is required. The arrangement of individual areas within a production environment can be done by solving the Facility Layout Problem (FLP). However, the previous solution methods only consider individual aspects and there are hardly any solution methods that consider the entire production system with regard to the material transport system. Due to this, a FLP solving method that also considers aspects regarding the material handling system is useful so that the created production environments can be simulated and/or used in practice. Therefore, both topics - FLP and AGV - should be considered together
Tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi MARA terhadap mata pelajaran Bahasa Inggeris
Kajian ini dilakukan untuk mengenal pasti tahap penguasaan, sikap dan minat pelajar
Kolej Kemahiran Tinggi Mara Sri Gading terhadap Bahasa Inggeris. Kajian yang
dijalankan ini berbentuk deskriptif atau lebih dikenali sebagai kaedah tinjauan. Seramai
325 orang pelajar Diploma in Construction Technology dari Kolej Kemahiran Tinggi
Mara di daerah Batu Pahat telah dipilih sebagai sampel dalam kajian ini. Data yang
diperoleh melalui instrument soal selidik telah dianalisis untuk mendapatkan
pengukuran min, sisihan piawai, dan Pekali Korelasi Pearson untuk melihat hubungan
hasil dapatan data. Manakala, frekuensi dan peratusan digunakan bagi mengukur
penguasaan pelajar. Hasil dapatan kajian menunjukkan bahawa tahap penguasaan
Bahasa Inggeris pelajar adalah berada pada tahap sederhana manakala faktor utama yang
mempengaruhi penguasaan Bahasa Inggeris tersebut adalah minat diikuti oleh sikap.
Hasil dapatan menggunakan pekali Korelasi Pearson juga menunjukkan bahawa terdapat
hubungan yang signifikan antara sikap dengan penguasaan Bahasa Inggeris dan antara
minat dengan penguasaan Bahasa Inggeris. Kajian menunjukkan bahawa semakin positif
sikap dan minat pelajar terhadap pengajaran dan pembelajaran Bahasa Inggeris semakin
tinggi pencapaian mereka. Hasil daripada kajian ini diharapkan dapat membantu pelajar
dalam meningkatkan penguasaan Bahasa Inggeris dengan memupuk sikap positif dalam
diri serta meningkatkan minat mereka terhadap Bahasa Inggeris dengan lebih baik. Oleh
itu, diharap kajian ini dapat memberi panduan kepada pihak-pihak yang terlibat dalam
membuat kajian yang akan datang
Product Return Handling
In this article we focus on product return handling and warehousingissues. In some businesses return rates can be well over 20% andreturns can be especially costly when not handled properly. In spiteof this, many managers have handled returns extemporarily. The factthat quantitative methods barely exist to support return handlingdecisions adds to this. In this article we bridge those issues by 1)going over the key decisions related with return handling; 2)identifying quantitative models to support those decisions.Furthermore, we provide insights on directions for future research.reverse logistics;decision-making;quantitative models;retailing and warehousing
A Review Of Design And Control Of Automated Guided Vehicle Systems
This paper presents a review on design and control of automated guided vehicle systems. We address most key related issues including guide-path design, estimating the number of
vehicles, vehicle scheduling, idle-vehicle positioning, battery management, vehicle routing, and conflict resolution. We discuss and classify important models and results from key publications in literature on automated guided vehicle systems, including often-neglected areas, such as idle-vehicle positioning and battery management. In addition, we propose a decision framework for design and implementation of automated guided vehicle systems, and suggest some fruitful research directions
Automated guided conveyor (AGC)
This project is focused on development of the control system for Automated Guided Conveyor (AGC) by using PIC 18F4550. Two approaches are proposed for this project; hardware approach where involves the development and design of AGC prototype, line follower, sensor circuit and controller circuit and software approach when the system of AGC are write by using microcode studio programmed. This project concentrates on developing the automatic system for AGC which about how the AGC will operate, involve of the movement mechanism. This prototype takes into account when AGC travel and also tries to travel in order by following the line follower. This thesis also includes the test automatic system involving test program and test circuit for the AGC before proceed to the prototype AGC control system
Otomatikleştirilmiş rehberli araç sistemlerinin transport tekniğinde modellemesi
The study objectives are to 1) provide information regarding the use and benefits of Automated Guided Vehicle (AGV) systems in manufacturing environments, and 2) review the literature related to design, modeling and simulation of AGV systems. We classify the tools utilized in design problems of AGV systems as analytical and simulation-based tools. Then, give examples of both categories from related literature.Çalışmanın amaçları; 1) Otomatikleştirilmiş Rehberli Araç (ORA, ingilizcesi, Automated Guided Vehicle, AGV) sistemlerinin kullanımı ve faydaları hakkında bilgiler vermek ve 2) ORA sistemlerinin tasarım, modellenme ve simulasyonu (benzetimi) ile ilgili kapsamlı bir literatür incelemesinin sonuçlarını sunmaktır. Öncelikle ORA sistemlerinin tasarım problemlerinde kullanılan yöntemleri analitik ve simülasyon yöntemler olarak ikiye ayrılıp, daha sonra, ilgili literatürden her iki gruba ait örnekler verilmektedir
Integer linear programming formulation of the vehicle positioning problem in automated manufacturing systems
8 páginasThis paper addresses the problem of vehicle location (positioning) for automated transport in fully automated
manufacturing systems. This study is motivated by the complexity of vehicle control found in modern integrated circuit
semiconductor fabrication facilities where the material handling network path is composed of multiple loops interconnected. In order to contribute to decrease the manufacturing
lead-time of semiconductor products, we propose an integer
linear program that minimizes the maximum time needed to
serve a transport request. Computation experiments are based
on real-life data. We discuss the practical usefulness of the
mathematical model by means of a simulation experiment
used to analyze the factory operational behavio
- …