On-line Structural Integrity Monitoring and Defect Diagnosis of Steam Generators Using Analysis of Guided Acoustic Waves

Integrity monitoring and flaw diagnostics of flat beams and tubular structures was investigated in this research using guided acoustic signals. The primary objective was to study the feasibility of using imbedded sensors for monitoring steam generator and heat exchanger tubing. A piezo-sensor suite was deployed to activate and collect Lamb wave signals that propagate along metallic specimens. The dispersion curves of Lamb waves along plate and tubular structures were generated through numerical analysis. Several advanced techniques were explored to extract representative features from acoustic time series. Among them, the Hilbert-Huang transform (HHT) is a recently developed technique for the analysis of non-linear and transient signals. A moving window method was introduced to generate the local peak characters from acoustic time series, and a zooming window technique was developed to localize the structural flaws. The dissertation presents the background of the analysis of acoustic signals acquired from piezo-electric transducers for structural defect monitoring. A comparison of the use of time-frequency techniques, including the Hilbert-Huang transform, is presented. It also presents the theoretical study of Lamb wave propagation in flat beams and tubular structures, and the need for mode separation in order to effectively perform defect diagnosis. The results of an extensive experimental study of detection, location, and isolation of structural defects in flat aluminum beams and brass tubes are presented. The time-frequency analysis and pattern recognition techniques were combined for classifying structural defects in brass tubes. Several types of flaws in brass tubes were tested, both in the air and in water. The techniques also proved to be effective under background/process noise. A detailed theoretical analysis of Lamb wave propagation was performed and simulations were carried out using the finite element software system ABAQUS. This analytical study confirmed the behavior of the acoustic signals acquired from the experimental studies. The results of this research showed the feasibility of on-line detection of small structural flaws by the use of transient and nonlinear acoustic signal analysis, and its implementation by the proper design of a piezo-electric transducer suite. The techniques developed in this research would be applicable to civil structures and aerospace structures

Use of Coherent Point Drift in computer vision applications

This thesis presents the novel use of Coherent Point Drift in improving the robustness of a number of computer vision applications. CPD approach includes two methods for registering two images - rigid and non-rigid point set approaches which are based on the transformation model used. The key characteristic of a rigid transformation is that the distance between points is preserved, which means it can be used in the presence of translation, rotation, and scaling. Non-rigid transformations - or affine transforms - provide the opportunity of registering under non-uniform scaling and skew. The idea is to move one point set coherently to align with the second point set. The CPD method finds both the non-rigid transformation and the correspondence distance between two point sets at the same time without having to use a-priori declaration of the transformation model used. The first part of this thesis is focused on speaker identification in video conferencing. A real-time, audio-coupled video based approach is presented, which focuses more on the video analysis side, rather than the audio analysis that is known to be prone to errors. CPD is effectively utilised for lip movement detection and a temporal face detection approach is used to minimise false positives if face detection algorithm fails to perform. The second part of the thesis is focused on multi-exposure and multi-focus image fusion with compensation for camera shake. Scale Invariant Feature Transforms (SIFT) are first used to detect keypoints in images being fused. Subsequently this point set is reduced to remove outliers, using RANSAC (RANdom Sample Consensus) and finally the point sets are registered using CPD with non-rigid transformations. The registered images are then fused with a Contourlet based image fusion algorithm that makes use of a novel alpha blending and filtering technique to minimise artefacts. The thesis evaluates the performance of the algorithm in comparison to a number of state-of-the-art approaches, including the key commercial products available in the market at present, showing significantly improved subjective quality in the fused images. The final part of the thesis presents a novel approach to Vehicle Make & Model Recognition in CCTV video footage. CPD is used to effectively remove skew of vehicles detected as CCTV cameras are not specifically configured for the VMMR task and may capture vehicles at different approaching angles. A LESH (Local Energy Shape Histogram) feature based approach is used for vehicle make and model recognition with the novelty that temporal processing is used to improve reliability. A number of further algorithms are used to maximise the reliability of the final outcome. Experimental results are provided to prove that the proposed system demonstrates an accuracy in excess of 95% when tested on real CCTV footage with no prior camera calibration

Damage assessment in composite structures using modal analysis and 2D undecimated fractional wavelet transform

An interest to novel methods of non-destructive testing (NDT) used for composite structures has been growing during the last decade due to the industrial necessities and development of measurement devices. The promising approach applied for NDT of composite structures is the vibration-based analysis with further processing of measurement data using advanced signal processing techniques, in particular wavelet transforms. In this paper, the 2D undecimated fractional wavelet transform was introduced, which allows for overcoming the problem of initial dataset reduction during performing a wavelet transform. The proposed approach was tested on various composite structures with different types of damages including cracks, delaminations, impact damages in laminates and the core damages and interface damages in sandwich composite structures. Obtained results confirm the effectiveness of the proposed approach and prove the universality of the modal-based NDT with wavelet analysis

ADVANTAGES OF USING SIFT FOR BRAIN TUMOR DETECTION

The brain is the anterior most part of the central nervous system. The cranium, a bony box in the skull protects it. Virtually every activity or thought of ours is controlled by our brain. So, it’s very dangerous when the proper functioning of the brain is hindered. Brain tumor is one such disease which if not detected early and treated accordingly, can prove fatal. Structure of the brain is quite complex and hence it is very difficult to detect the abnormalities in early stages. In our paper we will be giving an overview of the various techniques used for brain tumor detection and how SIFT overcomes their limitations. The techniques discussed include biopsy, manual segmentation, mathematical morphology & wavelet transform, artificial neural network and finally SIFT (Scale Invariant Feature Transform). Biopsy is a surgical method which needs to be performed by highly skilled professionals. The rest other methods use MRI images and thus are non-invasive. SIFT technique which we are using in our project gives good accuracy, is cost effective and most importantly is invariant to translation, scale, rotation, affine transform, change in illumination, etc

BEMDEC: An Adaptive and Robust Methodology for Digital Image Feature Extraction

The intriguing study of feature extraction, and edge detection in particular, has, as a result of the increased use of imagery, drawn even more attention not just from the field of computer science but also from a variety of scientific fields. However, various challenges surrounding the formulation of feature extraction operator, particularly of edges, which is capable of satisfying the necessary properties of low probability of error (i.e., failure of marking true edges), accuracy, and consistent response to a single edge, continue to persist. Moreover, it should be pointed out that most of the work in the area of feature extraction has been focused on improving many of the existing approaches rather than devising or adopting new ones. In the image processing subfield, where the needs constantly change, we must equally change the way we think. In this digital world where the use of images, for variety of purposes, continues to increase, researchers, if they are serious about addressing the aforementioned limitations, must be able to think outside the box and step away from the usual in order to overcome these challenges. In this dissertation, we propose an adaptive and robust, yet simple, digital image features detection methodology using bidimensional empirical mode decomposition (BEMD), a sifting process that decomposes a signal into its two-dimensional (2D) bidimensional intrinsic mode functions (BIMFs). The method is further extended to detect corners and curves, and as such, dubbed as BEMDEC, indicating its ability to detect edges, corners and curves. In addition to the application of BEMD, a unique combination of a flexible envelope estimation algorithm, stopping criteria and boundary adjustment made the realization of this multi-feature detector possible. Further application of two morphological operators of binarization and thinning adds to the quality of the operator