Miniaturized Piezo Force Sensor for a Medical Catheter and Implantable Device

Real-time monitoring of intrabody pressures can benefit from the use of miniaturized force sensors during surgical interventions or for the recovery period thereafter. Herein, we present a force sensor made of poly(vinylidene fluoride)-co-trifluoroethylene (P(VDF-TrFE)) with a simple fabrication process that has been integrated into the tip of a medical catheter for intraluminal pressure monitoring, as well as into an implantable device with a power consumption of 180 μW obtained by the near-field communication (NFC) interface to monitor the arterial pulse at the subcutaneous level (≤1 cm). The pressure range supported by the sensor is below 40 kPa, with a signal responsivity of 0.63 μV/Pa and a mean lifetime expectancy of 400 000 loading cycles inside physiological conditions (12 kPa). The proposed sensor has been tested experimentally with synthetic anatomical models for the lungs (bronchoscopy) and subcutaneous tissue, as well as directly above the human carotid and radial arteries. Information about these pressure levels can provide insights about tissue homeostasis inside the body as fluid dynamics are altered in some health conditions affecting the hemodynamic and endocrine body systems, whereas for surgical interventions, precise control and estimation of the pressure exerted by a catheter over the internal walls are necessary to avoid endothelium injuries that lead to bleeding, liquid extravasation, or flow alteration associated with atheroma formation

MEMS Technology for Biomedical Imaging Applications

Biomedical imaging is the key technique and process to create informative images of the human body or other organic structures for clinical purposes or medical science. Micro-electro-mechanical systems (MEMS) technology has demonstrated enormous potential in biomedical imaging applications due to its outstanding advantages of, for instance, miniaturization, high speed, higher resolution, and convenience of batch fabrication. There are many advancements and breakthroughs developing in the academic community, and there are a few challenges raised accordingly upon the designs, structures, fabrication, integration, and applications of MEMS for all kinds of biomedical imaging. This Special Issue aims to collate and showcase research papers, short commutations, perspectives, and insightful review articles from esteemed colleagues that demonstrate: (1) original works on the topic of MEMS components or devices based on various kinds of mechanisms for biomedical imaging; and (2) new developments and potentials of applying MEMS technology of any kind in biomedical imaging. The objective of this special session is to provide insightful information regarding the technological advancements for the researchers in the community

Real-Time Biosensing and Energy Harvesting on Human Body

This thesis covers two technologies that can be applied to the human body for real-time applicable usages: biosensors and energy harvesters. The first part of the thesis describes optical biosensing techniques based on surface-enhanced Raman spectroscopy (SERS). Our large-scale spatially uniform Raman enhancing substrates allow low-level bio molecule detection due to their strong plasmonic enhancement of the 3D Au-NP clusters. This method also enables low-level insulin sensing as well as insulin concentration analysis in islet secretion. These results can lead to developing simple and easy biosensing methods allowing real-time biosensing applications including convenient monitoring of health, early disease detection, and diabetes-related clinical measurements. The second part of the thesis suggests an energy harvesting method using vocal vibrations. The vocal folds produce mechanical vibrations that can serve as an energy source with consistent amplitude and frequency. The vibration hotspots exist at various locations on the human upper body. The energy harvesting system consisting of piezoelectric devices and energy harvesting circuits generates 3.99 mW of electrical power. The amount of energy generated from vocal vibrations is sufficient to charge a Li-Po battery which can drive an LCD display or charge Bluetooth headphones. This method demonstrating a relatively high power generation and convenience of practical use can provide a real-time complementary charging technique for wearable electronics like wireless headphones and smart glasses as well as medical implantable devices such as deep brain stimulators, cochlear implants and pacemakers.</p

Nonlinear mechanics and nonlinear material properties in micromechanical resonators

Microelectromechanical Systems are ubiquitous in modern technology, with applications ranging from accelerometers in smartphones to ultra-high precision motion stages used for atomically-precise positioning. With the appropriate selection of materials and device design, MEMS resonators with ultra-high quality factors can be fabricated at minimal cost. As the sizes of such resonators decrease, however, their mechanical, electrical, and material properties can no longer be treated as linear, as can be done for larger-scale devices. Unfortunately, adding nonlinear effects to a system changes its dynamics from exactly-solvable to only solvable in specific cases, if at all. Despite (and because of) these added complications, nonlinear effects open up an entirely new world of behaviors that can be measured or taken advantage of to create even more advanced technologies. In our resonators, oscillations are induced and measured using aluminum nitride transducers. I used this mechanism for several separate highly-sensitive experiments. In the first, I demonstrate the incredible sensitivity of these resonators by actuating a mechanical resonant mode using only the force generated by the radiation pressure of a laser at room temperature. In the following three experiments, which use similar mechanisms, I demonstrate information transfer and force measurements by taking advantage of the nonlinear behavior of the resonators. When nonlinear resonators are strongly driven, they exhibit sum and difference frequency generation, in which a large carrier signal can be mixed with a much smaller modulation to produce signals at sum and difference frequencies of the two signals. These sum and difference signals are used to detect information encoded in the modulation signal using optical radiation pressure and acoustic pressure waves. Finally, in my experiments, I probe the nonlinear nature of the piezoelectric material rather than take advantage of the nonlinear resonator behavior. The relative sizes of the linear and nonlinear portions of the piezoelectric constant can be determined because the force applied to the resonator by a transducer is independent of the dielectric constant. This method allowed me to quantify the nonlinear constants

A hybrid piezoelectric and electrostatic energy harvester for scavenging arterial pulsations

Implantable and wearable biomedical devices suffer from a limited lifespan of on-board batteries which results in a requirement to change the battery or the device itself causing additional physical discomfort. In order to overcome this, various energy harvesters have been developed. The human body possesses several types of energy available for scavenging through appropriately designed energy harvesting devices, while cardiovascular system in particular represents a constant reliable source of mechanical energy from vibration. Most conventional energy harvesters exploit only a single phenomenon, such piezo- or triboelectricity, thus producing reduced power density. As an improvement, hybridisation of energy harvesters intends to negate this drawback by simultaneously scavenging energy by multiple harvesters. In the present work, the reverse electrowetting on dielectric (REWOD) phenomenon is combined with the piezoelectric effect in a proof-of-concept hybrid harvester for scavenging biomechanical energy from arterial or other type pulsations. A mathematical model of the harvester was developed, and a computational investigation using CFD, and fluid-structure interaction simulations were carried out using the COMSOL Multiphysics software. The effect of the materials of piezoelectric film and geometrical features of the harvester on parameters such as the displacement, the frequency of pulsations and the energy produced were studied. An experimental setup that could imitate the displacements caused from arterial pulsations was designed and the produced electrical energy characteristics were analysed. A comparison between experimental and computational data was carried out and demonstrated a good agreement. Dependencies between geometrical parameters and electrical output were obtained, recommendation on piezoelectric materials and design solutions were provided

Biomimetic Nanomembranes: An Overview

Nanomembranes are the principal building block of basically all living organisms, and without them life as we know it would not be possible. Yet in spite of their ubiquity, for a long time their artificial counterparts have mostly been overlooked in mainstream microsystem and nanosystem technologies, being a niche topic at best, instead of holding their rightful position as one of the basic structures in such systems. Synthetic biomimetic nanomembranes are essential in a vast number of seemingly disparate fields, including separation science and technology, sensing technology, environmental protection, renewable energy, process industry, life sciences and biomedicine. In this study, we review the possibilities for the synthesis of inorganic, organic and hybrid nanomembranes mimicking and in some way surpassing living structures, consider their main properties of interest, give a short overview of possible pathways for their enhancement through multifunctionalization, and summarize some of their numerous applications reported to date, with a focus on recent findings. It is our aim to stress the role of functionalized synthetic biomimetic nanomembranes within the context of modern nanoscience and nanotechnologies. We hope to highlight the importance of the topic, as well as to stress its great applicability potentials in many facets of human life

EUROSENSORS XVII : book of abstracts

Fundação Calouste Gulbenkien (FCG).Fundação para a Ciência e a Tecnologia (FCT)

Electrospun Nanofibers for Biomedical Applications

Electrospinning is a versatile and effective technique widely used to manufacture nanofibrous structures from a diversity of materials (synthetic, natural or inorganic). The electrospun nanofibrous meshes’ composition, morphology, porosity, and surface functionality support the development of advanced solutions for many biomedical applications. The Special Issue on “Electrospun Nanofibers for Biomedical Applications” assembles a set of original and highly-innovative contributions showcasing advanced devices and therapies based on or involving electrospun meshes. It comprises 13 original research papers covering topics that span from biomaterial scaffolds’ structure and functionalization, nanocomposites, antibacterial nanofibrous systems, wound dressings, monitoring devices, electrical stimulation, bone tissue engineering to first-in-human clinical trials. This publication also includes four review papers focused on drug delivery and tissue engineering applications