Implementation of 8-Point Slantlet Transform Based Polynomial Cancellation Coding-OFDM System Using FPGA

The objective of this paper is to implement a baseband OFDM transceiver on FPGA hardware. The design uses 8-point SLT/ISLT (Slantlet/Inverse Slantlet) for the processing module with processing block of 8 inputs data wide. All modules are designed and implemented using VHDL programming language. Software tools used in this work includes Altera Quartus II 7.2 and ModelSim Altera 6.1g, to assist the design process and downloading process into FPGA board while Cyclone III board EP3C120F780C7 is used to realize the designed module

SdrLift: A Domain-Specific Intermediate Hardware Synthesis Framework for Prototyping Software-Defined Radios

Modern design of Software-Defined Radio (SDR) applications is based on Field Programmable Gate Arrays (FPGA) due to their ability to be configured into solution architectures that are well suited to domain-specific problems while achieving the best trade-off between performance, power, area, and flexibility. FPGAs are well known for rich computational resources, which traditionally include logic, register, and routing resources. The increased technological advances have seen FPGAs incorporating more complex components that comprise sophisticated memory blocks, Digital Signal Processing (DSP) blocks, and high-speed interfacing to Gigabit Ethernet (GbE) and Peripheral Component Interconnect Express (PCIe) bus. Gateware for programming FPGAs is described at a lowlevel of design abstraction using Register Transfer Language (RTL), typically using either VHSIC-HDL (VHDL) or Verilog code. In practice, the low-level description languages have a very steep learning curve, provide low productivity for hardware designers and lack readily available open-source library support for fundamental designs, and consequently limit the design to only hardware experts. These limitations have led to the adoption of High-Level Synthesis (HLS) tools that raise design abstraction using syntax, semantics, and software development notations that are well-known to most software developers. However, while HLS has made programming of FPGAs more accessible and can increase the productivity of design, they are still not widely adopted in the design community due to the low-level skills that are still required to produce efficient designs. Additionally, the resultant RTL code from HLS tools is often difficult to decipher, modify and optimize due to the functionality and micro-architecture that are coupled together in a single High-Level Language (HLL). In order to alleviate these problems, Domain-Specific Languages (DSL) have been introduced to capture algorithms at a high level of abstraction with more expressive power and providing domain-specific optimizations that factor in new transformations and the trade-off between resource utilization and system performance. The problem of existing DSLs is that they are designed around imperative languages with an instruction sequence that does not match the hardware structure and intrinsics, leading to hardware designs with system properties that are unconformable to the high-level specifications and constraints. The aim of this thesis is, therefore, to design and implement an intermediatelevel framework namely SdrLift for use in high-level rapid prototyping of SDR applications that are based on an FPGA. The SdrLift input is a HLL developed using functional language constructs and design patterns that specify the structural behavior of the application design. The functionality of the SdrLift language is two-fold, first, it can be used directly by a designer to develop the SDR applications, secondly, it can be used as the Intermediate Representation (IR) step that is generated by a higher-level language or a DSL. The SdrLift compiler uses the dataflow graph as an IR to structurally represent the accelerator micro-architecture in which the components correspond to the fine-level and coarse-level Hardware blocks (HW Block) which are either auto-synthesized or integrated from existing reusable Intellectual Property (IP) core libraries. Another IR is in the form of a dataflow model and it is used for composition and global interconnection of the HW Blocks while making efficient interfacing decisions in an attempt to satisfy speed and resource usage objectives. Moreover, the dataflow model provides rules and properties that will be used to provide a theoretical framework that formally analyzes the characteristics of SDR applications (i.e. the throughput, sample rate, latency, and buffer size among other factors). Using both the directed graph flow (DFG) and the dataflow model in the SdrLift compiler provides two benefits: an abstraction of the microarchitecture from the high-level algorithm specifications and also decoupling of the microarchitecture from the low-level RTL implementation. Following the IR creation and model analyses is the VHDL code generation which employs the low-level optimizations that ensure optimal hardware design results. The code generation process per forms analysis to ensure the resultant hardware system conforms to the high-level design specifications and constraints. SdrLift is evaluated by developing representative SDR case studies, in which the VHDL code for eight different SDR applications is generated. The experimental results show that SdrLift achieves the desired performance and flexibility, while also conserving the hardware resources utilized

Optimization of Power Consumption for the Design of 802.11n MIMO_OFDM System

في انظمة الاتصالات الحديثة توجد طرق مختلفة لتحسين أداء التقنيات السابقة التقليدية والتي تتعلق بمعالجة البيانات المرسلة والمستلمة من حيث زيادة سرعة عمليات الارسال والاستلام حيث انه البطئ في هذه العملية يؤدي الى فقدان الكثير من المعلومات المرسلة لذا فانه من الضروري تحسين تقنية تعدد الإرسال بتقسيم التردد المتعامد OFDM)) لأنه يعتبر في اولوية النظام اللاسلكي الذي يتضمن بيانات الأمن وموثوقية بيانات الإرسال. تطبيقات الاتصالات اللاسلكية مهم في هذا المجال من أجل تحسين وزيادة سرعة عملية معالجة البيانات والذي يؤدي بدوره بشكل مهم إلى تقليل مستوى استهلاك الطاقة للنظام. أن تصميم وتنفيذ الدوائر المتكاملة بأستخدام مصفوفة البوابات المبرمجة (FPGA) جاء لأجل تحسين اداء نظام الارسال والاستلام لل 802.11n في تقسيم التردد المتعامد حيث تم تصميم نظام (OFDM_MIMO) 6X6 بأستخدام المحاكاة في برنامج الماتلاب ومن ثم استخدام لغة البرمجة VHDL لغرض استخدامها في برمجة مصفوفة البوابات المبرمجة (FPGA) حيث تم استخدام نوع Xilinx Spartan 3 XC3S200 وفي النتائج تم الحصول على أقل أستهلاك للطاقة الكلية للنظام حيث سجلت  94mW مقارنة مع عمل سابق كانت سجلت mW136 أي قلت كمية الطاقة المستهلكة بنسبة 30.8%.In modern systems communication, different methods have been improved to change the prior imitative techniques that process communication data with high speed. It is necessary to improve (OFDM) Orthogonal Frequency Division Multiplexing technique because the development in the guideline communication of wireless system which include security data and transmission data reliability. The applications communications of wireless is important to develop in order to optimize the process of communication leads to reduce the level consumption energy of the output level signal. The architecture of VLSI is used to optimize the performance transceiver in 802.11 n OFDM-MIMO systems, this idea concentrate on the design of 6x6 MIMO_OFDM system in software simulink of MATLAB then using generator system for transfer to code of VHDL and applying in FPGA Xilinx Spartan 3 XC3S200 . The modelsim used to get the simulation while Xilinx power estimator is used to calculate power. The results registered total power consumption about 94mW while compared with previous work  was 136mW which means a high reduction of about 30.8%

Field programmable gate array implementation of multiwavelet transform based orthogonal frequency division multiplexing system

This article offers an efficient design and implementation of a discrete multiwavelet critical-sampling transform based orthogonal frequency division multiplexing (DMWCST-OFDM) transceiver using field programmable gate array (FPGA) platform. The design uses 16-point discrete multiwavelet critical-sampling transform (DMWCST) and its inverse as main processing modules. All modules were designed using a part of Vivado® Design Suite version (2015.2), which is Xilinx system generator (XSG), and is compatible with MATLAB Simulink version R2013b. The FPGA implementation is carried out on a Zynq (XC7Z020-1CLG484) evaluation board with joint test action group (JTAG) hardware co-simulation. According to the results obtained from the implementation tools, the implemented system is efficient in terms of resource utilization and could support the real-time operations

A real-time FPGA-based implementation of a high-performance MIMO-OFDM mobile WiMAX transmitter

The Multiple Input Multiple Output (MIMO)-Orthogonal Frequency Division Multiplexing (OFDM) is considered a key technology in modern wireless-access communication systems. The IEEE 802.16e standard, also denoted as mobile WiMAX, utilizes the MIMO-OFDM technology and it was one of the first initiatives towards the roadmap of fourth generation systems. This paper presents the PHY-layer design, implementation and validation of a high-performance real-time 2x2 MIMO mobile WiMAX transmitter that accounts for low-level deployment issues and signal impairments. The focus is mainly laid on the impact of the selected high bandwidth, which scales the implementation complexity of the baseband signal processing algorithms. The latter also requires an advanced pipelined memory architecture to timely address the datapath operations that involve high memory utilization. We present in this paper a first evaluation of the extracted results that demonstrate the performance of the system using a 2x2 MIMO channel emulation.Postprint (published version

Fast Power and Energy Efficiency Analysis of FPGA-based Wireless Base-band Processing

Nowadays, demands for high performance keep on increasing in the wireless communication domain. This leads to a consistent rise of the complexity and designing such systems has become a challenging task. In this context, energy efficiency is considered as a key topic, especially for embedded systems in which design space is often very constrained. In this paper, a fast and accurate power estimation approach for FPGA-based hardware systems is applied to a typical wireless communication system. It aims at providing power estimates of complete systems prior to their implementations. This is made possible by using a dedicated library of high-level models that are representative of hardware IPs. Based on high-level simulations, design space exploration is made a lot faster and easier. The definition of a scenario and the monitoring of IP's time-activities facilitate the comparison of several domain-specific systems. The proposed approach and its benefits are demonstrated through a typical use case in the wireless communication domain.Comment: Presented at HIP3ES, 201

A Review :Implementation of Reed Solomon Error Correction & Detec-tion For Wireless Network 802.16

The reed Solomon (255,239) are error-correcting & detecting code. Reed-Solomon codes are the most frequently used digital error control. It is also called as forword error code. The main part of reed-Solomon encoder is the linear feedback shift register that is implemented using VHDL A pipelined RS decoders is proposed of reducing the hardware complexity use the pipelined GFmultiplier in the syndrome computation block, KES block, Forney block, Chien search block and error correction block for provides low com-plexity the extended inversion less Massey-Berlekamp algorithm is used. The extended inversion less Massey-Berlekamp algorithm overcomes both the error locator polynomial and the error evaluator polynomial at the same time

Complexity Analysis of MMSE Detector Architectures for MIMO OFDM Systems

In this paper, a field programmable gate array (FPGA) implementation of a linear minimum mean square error (LMMSE) detector is considered for MIMO-OFDM systems. Two square root free algorithms based on QR decomposition (QRD) are introduced for the implementation of LMMSE detector. Both algorithms are based on QRD via Givens rotations, namely coordinate rotation digital computer (CORDIC) and squared Givens rotation (SGR) algorithms. Linear and triangular shaped array architectures are considered to exploit the parallelism in the computations. An FPGA hardware implementation is presented and computational complexity of each implementation is evaluated and compared.ElekrobitNokiaTexas InstrumentsNational Technology Agency of FinlandTeke

IEEE 802.11n Physical Layer Implementation on Field Programmable Gate Array

Register transfer level (RTL) development is a time cost step that requires high diligence and fidelity to get the valid interpretation of abstraction function of digital circuit. In this research, we introduce and prove that Model-Based Design Process (MBDP) is an effective and efficient way to develop a RTL complex system such as wireless communication. Using MBDP flow, we interpret, develop, and verify the physical layer RTL of a new standard that ratified on the end 2009, i.e. IEEE 802.11n wireless local area network (WLAN). The result of this research is a prototyping FPGA StratixII EP2S180 that has properly worked as a 2x2 MIMO WLAN with maximum throughput 144 Mbps.