101,743 research outputs found
Accelerating data-intensive scientific visualization and computing through parallelization
Many extreme-scale scientific applications generate colossal amounts of data that require an increasing number of processors for parallel processing. The research in this dissertation is focused on optimizing the performance of data-intensive parallel scientific visualization and computing.
In parallel scientific visualization, there exist three well-known parallel architectures, i.e., sort-first/middle/last. The research in this dissertation studies the composition stage of the sort-last architecture for scientific visualization and proposes a generalized method, namely, Grouping More and Pairing Less (GMPL), for order-independent image composition workflow scheduling in sort-last parallel rendering. The technical merits of GMPL are two-fold: i) it takes a prime factorization-based approach for processor grouping, which not only obviates the common restriction in existing methods on the total number of processors to fully utilize computing resources, but also breaks down processors to the lowest level with a minimum number of peers in each group to achieve high concurrency and save communication cost; ii) within each group, it employs an improved direct send method to narrow down each processor’s pairing scope to further reduce communication overhead and increase composition efficiency. The performance superiority of GMPL over existing methods is evaluated through rigorous theoretical analysis and further verified by extensive experimental results on a high-performance visualization cluster.
The research in this dissertation also parallelizes the over operator, which is commonly used for α-blending in various visualization techniques. Compared with its predecessor, the fully generalized over operator is n-operator compatible. To demonstrate the advantages of the proposed operator, the proposed operator is applied to the asynchronous and order-dependent image composition problem in parallel visualization.
In addition, the dissertation research also proposes a very-high-speed pipeline-based architecture for parallel sort-last visualization of big data by developing and integrating three component techniques: i) a fully parallelized per-ray integration method that significantly reduces the number of iterations required for image rendering; ii) a real-time over operator that not only eliminates the restriction of pre-sorting and order-dependency, but also facilitates a high degree of parallelization for image composition.
In parallel scientific computing, the research goal is to optimize QR decomposition, which is one primary algebraic decomposition procedure and plays an important role in scientific computing. QR decomposition produces orthogonal bases, i.e.,“core” bases for a given matrix, and oftentimes can be leveraged to build a complete solution to many fundamental scientific computing problems including Least Squares Problem, Linear Equations Problem, Eigenvalue Problem. A new matrix decomposition method is proposed to improve time efficiency of parallel computing and provide a rigorous proof of its numerical stability.
The proposed solutions demonstrate significant performance improvement over existing methods for data-intensive parallel scientific visualization and computing. Considering the ever-increasing data volume in various science domains, the research in this dissertation have a great impact on the success of next-generation large-scale scientific applications
ASCR/HEP Exascale Requirements Review Report
This draft report summarizes and details the findings, results, and
recommendations derived from the ASCR/HEP Exascale Requirements Review meeting
held in June, 2015. The main conclusions are as follows. 1) Larger, more
capable computing and data facilities are needed to support HEP science goals
in all three frontiers: Energy, Intensity, and Cosmic. The expected scale of
the demand at the 2025 timescale is at least two orders of magnitude -- and in
some cases greater -- than that available currently. 2) The growth rate of data
produced by simulations is overwhelming the current ability, of both facilities
and researchers, to store and analyze it. Additional resources and new
techniques for data analysis are urgently needed. 3) Data rates and volumes
from HEP experimental facilities are also straining the ability to store and
analyze large and complex data volumes. Appropriately configured
leadership-class facilities can play a transformational role in enabling
scientific discovery from these datasets. 4) A close integration of HPC
simulation and data analysis will aid greatly in interpreting results from HEP
experiments. Such an integration will minimize data movement and facilitate
interdependent workflows. 5) Long-range planning between HEP and ASCR will be
required to meet HEP's research needs. To best use ASCR HPC resources the
experimental HEP program needs a) an established long-term plan for access to
ASCR computational and data resources, b) an ability to map workflows onto HPC
resources, c) the ability for ASCR facilities to accommodate workflows run by
collaborations that can have thousands of individual members, d) to transition
codes to the next-generation HPC platforms that will be available at ASCR
facilities, e) to build up and train a workforce capable of developing and
using simulations and analysis to support HEP scientific research on
next-generation systems.Comment: 77 pages, 13 Figures; draft report, subject to further revisio
Measuring the Impact of Spectre and Meltdown
The Spectre and Meltdown flaws in modern microprocessors represent a new
class of attacks that have been difficult to mitigate. The mitigations that
have been proposed have known performance impacts. The reported magnitude of
these impacts varies depending on the industry sector and expected workload
characteristics. In this paper, we measure the performance impact on several
workloads relevant to HPC systems. We show that the impact can be significant
on both synthetic and realistic workloads. We also show that the performance
penalties are difficult to avoid even in dedicated systems where security is a
lesser concern
A Tale of Two Data-Intensive Paradigms: Applications, Abstractions, and Architectures
Scientific problems that depend on processing large amounts of data require
overcoming challenges in multiple areas: managing large-scale data
distribution, co-placement and scheduling of data with compute resources, and
storing and transferring large volumes of data. We analyze the ecosystems of
the two prominent paradigms for data-intensive applications, hereafter referred
to as the high-performance computing and the Apache-Hadoop paradigm. We propose
a basis, common terminology and functional factors upon which to analyze the
two approaches of both paradigms. We discuss the concept of "Big Data Ogres"
and their facets as means of understanding and characterizing the most common
application workloads found across the two paradigms. We then discuss the
salient features of the two paradigms, and compare and contrast the two
approaches. Specifically, we examine common implementation/approaches of these
paradigms, shed light upon the reasons for their current "architecture" and
discuss some typical workloads that utilize them. In spite of the significant
software distinctions, we believe there is architectural similarity. We discuss
the potential integration of different implementations, across the different
levels and components. Our comparison progresses from a fully qualitative
examination of the two paradigms, to a semi-quantitative methodology. We use a
simple and broadly used Ogre (K-means clustering), characterize its performance
on a range of representative platforms, covering several implementations from
both paradigms. Our experiments provide an insight into the relative strengths
of the two paradigms. We propose that the set of Ogres will serve as a
benchmark to evaluate the two paradigms along different dimensions.Comment: 8 pages, 2 figure
Research and Education in Computational Science and Engineering
Over the past two decades the field of computational science and engineering
(CSE) has penetrated both basic and applied research in academia, industry, and
laboratories to advance discovery, optimize systems, support decision-makers,
and educate the scientific and engineering workforce. Informed by centuries of
theory and experiment, CSE performs computational experiments to answer
questions that neither theory nor experiment alone is equipped to answer. CSE
provides scientists and engineers of all persuasions with algorithmic
inventions and software systems that transcend disciplines and scales. Carried
on a wave of digital technology, CSE brings the power of parallelism to bear on
troves of data. Mathematics-based advanced computing has become a prevalent
means of discovery and innovation in essentially all areas of science,
engineering, technology, and society; and the CSE community is at the core of
this transformation. However, a combination of disruptive
developments---including the architectural complexity of extreme-scale
computing, the data revolution that engulfs the planet, and the specialization
required to follow the applications to new frontiers---is redefining the scope
and reach of the CSE endeavor. This report describes the rapid expansion of CSE
and the challenges to sustaining its bold advances. The report also presents
strategies and directions for CSE research and education for the next decade.Comment: Major revision, to appear in SIAM Revie
BOSS-LDG: A Novel Computational Framework that Brings Together Blue Waters, Open Science Grid, Shifter and the LIGO Data Grid to Accelerate Gravitational Wave Discovery
We present a novel computational framework that connects Blue Waters, the
NSF-supported, leadership-class supercomputer operated by NCSA, to the Laser
Interferometer Gravitational-Wave Observatory (LIGO) Data Grid via Open Science
Grid technology. To enable this computational infrastructure, we configured,
for the first time, a LIGO Data Grid Tier-1 Center that can submit
heterogeneous LIGO workflows using Open Science Grid facilities. In order to
enable a seamless connection between the LIGO Data Grid and Blue Waters via
Open Science Grid, we utilize Shifter to containerize LIGO's workflow software.
This work represents the first time Open Science Grid, Shifter, and Blue Waters
are unified to tackle a scientific problem and, in particular, it is the first
time a framework of this nature is used in the context of large scale
gravitational wave data analysis. This new framework has been used in the last
several weeks of LIGO's second discovery campaign to run the most
computationally demanding gravitational wave search workflows on Blue Waters,
and accelerate discovery in the emergent field of gravitational wave
astrophysics. We discuss the implications of this novel framework for a wider
ecosystem of Higher Performance Computing users.Comment: 10 pages, 10 figures. Accepted as a Full Research Paper to the 13th
IEEE International Conference on eScienc
Building Near-Real-Time Processing Pipelines with the Spark-MPI Platform
Advances in detectors and computational technologies provide new
opportunities for applied research and the fundamental sciences. Concurrently,
dramatic increases in the three Vs (Volume, Velocity, and Variety) of
experimental data and the scale of computational tasks produced the demand for
new real-time processing systems at experimental facilities. Recently, this
demand was addressed by the Spark-MPI approach connecting the Spark
data-intensive platform with the MPI high-performance framework. In contrast
with existing data management and analytics systems, Spark introduced a new
middleware based on resilient distributed datasets (RDDs), which decoupled
various data sources from high-level processing algorithms. The RDD middleware
significantly advanced the scope of data-intensive applications, spreading from
SQL queries to machine learning to graph processing. Spark-MPI further extended
the Spark ecosystem with the MPI applications using the Process Management
Interface. The paper explores this integrated platform within the context of
online ptychographic and tomographic reconstruction pipelines.Comment: New York Scientific Data Summit, August 6-9, 201
rDLB: A Novel Approach for Robust Dynamic Load Balancing of Scientific Applications with Parallel Independent Tasks
Scientific applications often contain large and computationally intensive
parallel loops. Dynamic loop self scheduling (DLS) is used to achieve a
balanced load execution of such applications on high performance computing
(HPC) systems. Large HPC systems are vulnerable to processors or node failures
and perturbations in the availability of resources. Most self-scheduling
approaches do not consider fault-tolerant scheduling or depend on failure or
perturbation detection and react by rescheduling failed tasks. In this work, a
robust dynamic load balancing (rDLB) approach is proposed for the robust self
scheduling of independent tasks. The proposed approach is proactive and does
not depend on failure or perturbation detection. The theoretical analysis of
the proposed approach shows that it is linearly scalable and its cost decrease
quadratically by increasing the system size. rDLB is integrated into an MPI DLS
library to evaluate its performance experimentally with two computationally
intensive scientific applications. Results show that rDLB enables the tolerance
of up to (P minus one) processor failures, where P is the number of processors
executing an application. In the presence of perturbations, rDLB boosted the
robustness of DLS techniques up to 30 times and decreased application execution
time up to 7 times compared to their counterparts without rDLB
- …