Development of an augmented reality guided computer assisted orthopaedic surgery system

Previously held under moratorium from 1st December 2016 until 1st December 2021.This body of work documents the developed of a proof of concept augmented reality guided computer assisted orthopaedic surgery system – ARgCAOS. After initial investigation a visible-spectrum single camera tool-mounted tracking system based upon fiducial planar markers was implemented. The use of visible-spectrum cameras, as opposed to the infra-red cameras typically used by surgical tracking systems, allowed the captured image to be streamed to a display in an intelligible fashion. The tracking information defined the location of physical objects relative to the camera. Therefore, this information allowed virtual models to be overlaid onto the camera image. This produced a convincing augmented experience, whereby the virtual objects appeared to be within the physical world, moving with both the camera and markers as expected of physical objects. Analysis of the first generation system identified both accuracy and graphical inadequacies, prompting the development of a second generation system. This too was based upon a tool-mounted fiducial marker system, and improved performance to near-millimetre probing accuracy. A resection system was incorporated into the system, and utilising the tracking information controlled resection was performed, producing sub-millimetre accuracies. Several complications resulted from the tool-mounted approach. Therefore, a third generation system was developed. This final generation deployed a stereoscopic visible-spectrum camera system affixed to a head-mounted display worn by the user. The system allowed the augmentation of the natural view of the user, providing convincing and immersive three dimensional augmented guidance, with probing and resection accuracies of 0.55±0.04 and 0.34±0.04 mm, respectively.This body of work documents the developed of a proof of concept augmented reality guided computer assisted orthopaedic surgery system – ARgCAOS. After initial investigation a visible-spectrum single camera tool-mounted tracking system based upon fiducial planar markers was implemented. The use of visible-spectrum cameras, as opposed to the infra-red cameras typically used by surgical tracking systems, allowed the captured image to be streamed to a display in an intelligible fashion. The tracking information defined the location of physical objects relative to the camera. Therefore, this information allowed virtual models to be overlaid onto the camera image. This produced a convincing augmented experience, whereby the virtual objects appeared to be within the physical world, moving with both the camera and markers as expected of physical objects. Analysis of the first generation system identified both accuracy and graphical inadequacies, prompting the development of a second generation system. This too was based upon a tool-mounted fiducial marker system, and improved performance to near-millimetre probing accuracy. A resection system was incorporated into the system, and utilising the tracking information controlled resection was performed, producing sub-millimetre accuracies. Several complications resulted from the tool-mounted approach. Therefore, a third generation system was developed. This final generation deployed a stereoscopic visible-spectrum camera system affixed to a head-mounted display worn by the user. The system allowed the augmentation of the natural view of the user, providing convincing and immersive three dimensional augmented guidance, with probing and resection accuracies of 0.55±0.04 and 0.34±0.04 mm, respectively

Precise nanoscale characterisation of novel Heusler thermoelectrics via analytical electron microscopy

Thermoelectric power generation presents an opportunity to `scavenge' energy that would otherwise be wasted as heat. Heusler alloys, a class of materials often comprising inexpensive, non-toxic elements, are promising for practical use in a new generation of thermoelectric devices. Recently, efficient thermoelectric Heusler alloys have overcome a performance-limiting thermal conductivity through the introduction of nanostructures that scatter phonons and impede thermal transport. However, the nature and stability of nanostructures can be difficult to discern, especially the minor compositional variations that derive from inhomogeneous phase segregation. Throughout this thesis TiNiSn, which forms the basis for some of the most promising n-type half-Heusler thermoelectrics, is studied through a unique combination of elemental and diffractive analysis in the scanning transmission electron microscope (STEM). Epitaxial thin films of TiNiSn are grown by pulsed laser deposition and FIB-prepared cross-sections of these are characterised in STEM with a focus on aberration-corrected STEM-EELS spectrum imaging and scanning precession electron diffraction (SPED), yielding precise chemical and structural quantification with nanoscale spatial resolution. The results throughout this thesis demonstrate the importance of STEM for quantitative studies of thermoelectric materials, as it can provide the analytical precision required for accurate identification of minority phases in TiNiSn specimens that would otherwise be overlooked in bulk analytical techniques. Sensitivity to very small elemental concentrations is a cornerstone of the use of STEM-EELS for chemical characterisation. Precisions of 0.3 % were achieved through adoption and development of refined, reference-based, absolute elemental quantification protocols which were essential in overcoming difficulties with large uncertainties posed by conventional methods. The success of this approach, in part, is due to advances made in characterisation of experimental conditions including, for the first time, an automated, standard-less approach to the measurement and correction of energy dispersion non-uniformities. Dispersion correction enables reliable, absolute calibration of energy-loss in spectra to yield a precision better than 0.1 eV. These developments in STEM-EELS were then used in three investigations of TiNiSn thin films exploring aspects of nanostructuring, phase segregation and crystrallographic strain and coherency. We discovered the spontaneous formation of nanostructures during thin film growth, gaining some insight into the phase segregation mechanisms that lead to their nucleation. Novel in situ STEM studies of phase segregation facilitated direct observations of the thermal evolution of nanoscale phases and results enabled characterisation of diffusion rates of Ni migration between full- and half-Heusler phases, for which the activation energy was calculated as 0.3~eV. Combining SPED with advances in detector technology, STEM structural investigations highlighted an interesting strain texture associated with nanostructuring of the half-Heusler thin films. Finally, combining SPED results with STEM-EELS measurements is proposed as a route to `correlative-STEM' analysis, which unifies nanoscale chemical and structural information for greater insights into the impact of nanostructures in thermoelectrics

Advanced Knowledge Application in Practice

The integration and interdependency of the world economy leads towards the creation of a global market that offers more opportunities, but is also more complex and competitive than ever before. Therefore widespread research activity is necessary if one is to remain successful on the market. This book is the result of research and development activities from a number of researchers worldwide, covering concrete fields of research

Polarimetric Synthetic Aperture Radar

This open access book focuses on the practical application of electromagnetic polarimetry principles in Earth remote sensing with an educational purpose. In the last decade, the operations from fully polarimetric synthetic aperture radar such as the Japanese ALOS/PalSAR, the Canadian Radarsat-2 and the German TerraSAR-X and their easy data access for scientific use have developed further the research and data applications at L,C and X band. As a consequence, the wider distribution of polarimetric data sets across the remote sensing community boosted activity and development in polarimetric SAR applications, also in view of future missions. Numerous experiments with real data from spaceborne platforms are shown, with the aim of giving an up-to-date and complete treatment of the unique benefits of fully polarimetric synthetic aperture radar data in five different domains: forest, agriculture, cryosphere, urban and oceans

Towards a National 3D Mapping Product for Great Britain

Knowing where something happens and where people are located can be critically important to understand issues ranging from climate change to road accidents, crime, schooling, transport and much more. To analyse these spatial problems, two-dimensional representations of the world, such as paper or digital maps, have traditionally been used. Geographic information systems (GIS) are the tools that enable capture, modelling, storage, retrieval, sharing, manipulation, analysis, and presentation of geographically referenced data. Three-dimensional geographic information (3D GI) is data that can represent real-world features as objects in 3D space. 3D GI offers additional functionality not possible in 2D, including analysing and querying volume, visibility, surface and sub-surface, and shadowing. This thesis contributes to the understanding of user requirements and other data related considerations in the production of 3D geographic information at a national level. The study promotes Ordnance Survey’s efforts in developing a 3D geographic product through: (1) identifying potential applications; (2) analysing existing 3D city modelling approaches; (3) eliciting and formalising user requirements; (4) developing metrics to describe the usefulness of 3D data and; (5) evaluating the commerciality of 3D GI. A review of current applications of 3D showed that visualisation dominated as the main use, allowing for better communication, and supporting decision-making processes. Reflecting this, an examination of existing 3D city models showed that, despite the varying modelling approaches, there was a general focus towards accurate and realistic geometric representation of the urban environment. Web-based questionnaires and semi-structured interviews revealed that while some applications (e.g. subsurface, photovoltaics, air and noise quality) lead the field with a high adoption of 3D, others were laggards due to organisational inertia (e.g. insurance, facilities management). Individuals expressed positive views on the use of 3D, but still struggled to justify the value and business case. Simple building geometry coupled with non-building thematic classes was perceived to be most useful by users. Several metrics were developed to quantify and compare the characteristics of thirty-three 3D datasets. Results showed that geometry-based metrics such as minimum feature length or Euler characteristic can be used to provide additional information as part of fitness-for-purpose evaluations. The metrics can also contribute to quality control during data production. An investigation into the commercial opportunities explored the economic value of 3D, the market size of 3D data in Great Britain, as well as proposed a number of opportunities within the wider business context of Ordnance Survey

12th International Conference on Vibrations in Rotating Machinery

Since 1976, the Vibrations in Rotating Machinery conferences have successfully brought industry and academia together to advance state-of-the-art research in dynamics of rotating machinery. 12th International Conference on Vibrations in Rotating Machinery contains contributions presented at the 12th edition of the conference, from industrial and academic experts from different countries. The book discusses the challenges in rotor-dynamics, rub, whirl, instability and more. The topics addressed include: - Active, smart vibration control - Rotor balancing, dynamics, and smart rotors - Bearings and seals - Noise vibration and harshness - Active and passive damping - Applications: wind turbines, steam turbines, gas turbines, compressors - Joints and couplings - Challenging performance boundaries of rotating machines - High power density machines - Electrical machines for aerospace - Management of extreme events - Active machines - Electric supercharging - Blades and bladed assemblies (forced response, flutter, mistuning) - Fault detection and condition monitoring - Rub, whirl and instability - Torsional vibration Providing the latest research and useful guidance, 12th International Conference on Vibrations in Rotating Machinery aims at those from industry or academia that are involved in transport, power, process, medical engineering, manufacturing or construction

EG-ICE 2021 Workshop on Intelligent Computing in Engineering

The 28th EG-ICE International Workshop 2021 brings together international experts working at the interface between advanced computing and modern engineering challenges. Many engineering tasks require open-world resolutions to support multi-actor collaboration, coping with approximate models, providing effective engineer-computer interaction, search in multi-dimensional solution spaces, accommodating uncertainty, including specialist domain knowledge, performing sensor-data interpretation and dealing with incomplete knowledge. While results from computer science provide much initial support for resolution, adaptation is unavoidable and most importantly, feedback from addressing engineering challenges drives fundamental computer-science research. Competence and knowledge transfer goes both ways