Elevating commodity storage with the SALSA host translation layer

To satisfy increasing storage demands in both capacity and performance, industry has turned to multiple storage technologies, including Flash SSDs and SMR disks. These devices employ a translation layer that conceals the idiosyncrasies of their mediums and enables random access. Device translation layers are, however, inherently constrained: resources on the drive are scarce, they cannot be adapted to application requirements, and lack visibility across multiple devices. As a result, performance and durability of many storage devices is severely degraded. In this paper, we present SALSA: a translation layer that executes on the host and allows unmodified applications to better utilize commodity storage. SALSA supports a wide range of single- and multi-device optimizations and, because is implemented in software, can adapt to specific workloads. We describe SALSA's design, and demonstrate its significant benefits using microbenchmarks and case studies based on three applications: MySQL, the Swift object store, and a video server.Comment: Presented at 2018 IEEE 26th International Symposium on Modeling, Analysis, and Simulation of Computer and Telecommunication Systems (MASCOTS

상변화 메모리 시스템의 간섭 오류 완화 및 RMW 성능 향상 기법

학위논문(박사) -- 서울대학교대학원 : 공과대학 전기·정보공학부, 2021.8. 이혁재.Phase-change memory (PCM) announces the beginning of the new era of memory systems, owing to attractive characteristics. Many memory product manufacturers (e.g., Intel, SK Hynix, and Samsung) are developing related products. PCM can be applied to various circumstances; it is not simply limited to an extra-scale database. For example, PCM has a low standby power due to its non-volatility; hence, computation-intensive applications or mobile applications (i.e., long memory idle time) are suitable to run on PCM-based computing systems. Despite these fascinating features of PCM, PCM is still far from the general commercial market due to low reliability and long latency problems. In particular, low reliability is a painful problem for PCM in past decades. As the semiconductor process technology rapidly scales down over the years, DRAM reaches 10 nm class process technology. In addition, it is reported that the write disturbance error (WDE) would be a serious issue for PCM if it scales down below 54 nm class process technology. Therefore, addressing the problem of WDEs becomes essential to make PCM competitive to DRAM. To overcome this problem, this dissertation proposes a novel approach that can restore meta-stable cells on demand by levering two-level SRAM-based tables, thereby significantly reducing the number WDEs. Furthermore, a novel randomized approach is proposed to implement a replacement policy that originally requires hundreds of read ports on SRAM. The second problem of PCM is a long-latency compared to that of DRAM. In particular, PCM tries to enhance its throughput by adopting a larger transaction unit; however, the different unit size from the general-purpose processor cache line further degrades the system performance due to the introduction of a read-modify-write (RMW) module. Since there has never been any research related to RMW in a PCM-based memory system, this dissertation proposes a novel architecture to enhance the overall system performance and reliability of a PCM-based memory system having an RMW module. The proposed architecture enhances data re-usability without introducing extra storage resources. Furthermore, a novel operation that merges commands regardless of command types is proposed to enhance performance notably. Another problem is the absence of a full simulation platform for PCM. While the announced features of the PCM-related product (i.e., Intel Optane) are scarce due to confidential issues, all priceless information can be integrated to develop an architecture simulator that resembles the available product. To this end, this dissertation tries to scrape up all available features of modules in a PCM controller and implement a dedicated simulator for future research purposes.상변화 메모리는(PCM) 매력적인 특성을 통해 메모리 시스템의 새로운 시대의 시작을 알렸다. 많은 메모리 관련 제품 제조업체(예 : 인텔, SK 하이닉스, 삼성)가 관련 제품 개발에 박차를 가하고 있다. PCM은 단순히 대규모 데이터베이스에만 국한되지 않고 다양한 상황에 적용될 수 있다. 예를 들어, PCM은 비휘발성으로 인해 대기 전력이 낮다. 따라서 계산 집약적인 애플리케이션 또는 모바일 애플리케이션은(즉, 긴 메모리 유휴 시간) PCM 기반 컴퓨팅 시스템에서 실행하기에 적합하다. PCM의 이러한 매력적인 특성에도 불구하고 PCM은 낮은 신뢰성과 긴 대기 시간으로 인해 여전히 일반 산업 시장에서는 DRAM과 다소 격차가 있다. 특히 낮은 신뢰성은 지난 수십 년 동안 PCM 기술의 발전을 저해하는 문제다. 반도체 공정 기술이 수년에 걸쳐 빠르게 축소됨에 따라 DRAM은 10nm 급 공정 기술에 도달하였다. 이어서, 쓰기 방해 오류 (WDE)가 54nm 등급 프로세스 기술 아래로 축소되면 PCM에 심각한 문제가 될 것으로 보고되었다. 따라서, WDE 문제를 해결하는 것은 PCM이 DRAM과 동등한 경쟁력을 갖추도록 하는 데 있어 필수적이다. 이 문제를 극복하기 위해 이 논문에서는 2-레벨 SRAM 기반 테이블을 활용하여 WDE 수를 크게 줄여 필요에 따라 준 안정 셀을 복원할 수 있는 새로운 접근 방식을 제안한다. 또한, 원래 SRAM에서 수백 개의 읽기 포트가 필요한 대체 정책을 구현하기 위해 새로운 랜덤 기반의 기법을 제안한다. PCM의 두 번째 문제는 DRAM에 비해 지연 시간이 길다는 것이다. 특히 PCM은 더 큰 트랜잭션 단위를 채택하여 단위시간 당 데이터 처리량 향상을 도모한다. 그러나 범용 프로세서 캐시 라인과 다른 유닛 크기는 읽기-수정-쓰기 (RMW) 모듈의 도입으로 인해 시스템 성능을 저하하게 된다. PCM 기반 메모리 시스템에서 RMW 관련 연구가 없었기 때문에 본 논문은 RMW 모듈을 탑재 한 PCM 기반 메모리 시스템의 전반적인 시스템 성능과 신뢰성을 향상하게 시킬 수 있는 새로운 아키텍처를 제안한다. 제안된 아키텍처는 추가 스토리지 리소스를 도입하지 않고도 데이터 재사용성을 향상시킨다. 또한, 성능 향상을 위해 명령 유형과 관계없이 명령을 병합하는 새로운 작업을 제안한다. 또 다른 문제는 PCM을 위한 완전한 시뮬레이션 플랫폼이 부재하다는 것이다. PCM 관련 제품(예 : Intel Optane)에 대해 발표된 정보는 대외비 문제로 인해 부족하다. 하지만 알려져 있는 정보를 적절히 취합하면 시중 제품과 유사한 아키텍처 시뮬레이터를 개발할 수 있다. 이를 위해 본 논문은 PCM 메모리 컨트롤러에 필요한 모든 모듈 정보를 활용하여 향후 이와 관련된 연구에서 충분히 사용 가능한 전용 시뮬레이터를 구현하였다.1 INTRODUCTION 1 1.1 Limitation of Traditional Main Memory Systems 1 1.2 Phase-Change Memory as Main Memory 3 1.2.1 Opportunities of PCM-based System 3 1.2.2 Challenges of PCM-based System 4 1.3 Dissertation Overview 7 2 BACKGROUND AND PREVIOUS WORK 8 2.1 Phase-Change Memory 8 2.2 Mitigation Schemes for Write Disturbance Errors 10 2.2.1 Write Disturbance Errors 10 2.2.2 Verification and Correction 12 2.2.3 Lazy Correction 13 2.2.4 Data Encoding-based Schemes 14 2.2.5 Sparse-Insertion Write Cache 16 2.3 Performance Enhancement for Read-Modify-Write 17 2.3.1 Traditional Read-Modify-Write 17 2.3.2 Write Coalescing for RMW 19 2.4 Architecture Simulators for PCM 21 2.4.1 NVMain 21 2.4.2 Ramulator 22 2.4.3 DRAMsim3 22 3 IN-MODULE DISTURBANCE BARRIER 24 3.1 Motivation 25 3.2 IMDB: In Module-Disturbance Barrier 29 3.2.1 Architectural Overview 29 3.2.2 Implementation of Data Structures 30 3.2.3 Modification of Media Controller 36 3.3 Replacement Policy 38 3.3.1 Replacement Policy for IMDB 38 3.3.2 Approximate Lowest Number Estimator 40 3.4 Putting All Together: Case Studies 43 3.5 Evaluation 45 3.5.1 Configuration 45 3.5.2 Architectural Exploration 47 3.5.3 Effectiveness of the Replacement Policy 48 3.5.4 Sensitivity to Main Table Configuration 49 3.5.5 Sensitivity to Barrier Buffer Size 51 3.5.6 Sensitivity to AppLE Group Size 52 3.5.7 Comparison with Other Studies 54 3.6 Discussion 59 3.7 Summary 63 4 INTEGRATION OF AN RMW MODULE IN A PCM-BASED SYSTEM 64 4.1 Motivation 65 4.2 Utilization of DRAM Cache for RMW 67 4.2.1 Architectural Design 67 4.2.2 Algorithm 70 4.3 Typeless Command Merging 73 4.3.1 Architectural Design 73 4.3.2 Algorithm 74 4.4 An Alternative Implementation: SRC-RMW 78 4.4.1 Implementation of SRC-RMW 78 4.4.2 Design Constraint 80 4.5 Case Study 82 4.6 Evaluation 85 4.6.1 Configuration 85 4.6.2 Speedup 88 4.6.3 Read Reliability 91 4.6.4 Energy Consumption: Selecting a Proper Page Size 93 4.6.5 Comparison with Other Studies 95 4.7 Discussion 97 4.8 Summary 99 5 AN ALL-INCLUSIVE SIMULATOR FOR A PCM CONTROLLER 100 5.1 Motivation 101 5.2 PCMCsim: PCM Controller Simulator 103 5.2.1 Architectural Overview 103 5.2.2 Underlying Classes of PCMCsim 104 5.2.3 Implementation of Contention Behavior 108 5.2.4 Modules of PCMCsim 109 5.3 Evaluation 116 5.3.1 Correctness of the Simulator 116 5.3.2 Comparison with Other Simulators 117 5.4 Summary 119 6 Conclusion 120 Abstract (In Korean) 141 Acknowledgment 143박

Signal Processing for Caching Networks and Non-volatile Memories

The recent information explosion has created a pressing need for faster and more reliable data storage and transmission schemes. This thesis focuses on two systems: caching networks and non-volatile storage systems. It proposes network protocols to improve the efficiency of information delivery and signal processing schemes to reduce errors at the physical layer as well. This thesis first investigates caching and delivery strategies for content delivery networks. Caching has been investigated as a useful technique to reduce the network burden by prefetching some contents during o˙-peak hours. Coded caching [1] proposed by Maddah-Ali and Niesen is the foundation of our algorithms and it has been shown to be a useful technique which can reduce peak traffic rates by encoding transmissions so that different users can extract different information from the same packet. Content delivery networks store information distributed across multiple servers, so as to balance the load and avoid unrecoverable losses in case of node or disk failures. On one hand, distributed storage limits the capability of combining content from different servers into a single message, causing performance losses in coded caching schemes. But, on the other hand, the inherent redundancy existing in distributed storage systems can be used to improve the performance of those schemes through parallelism. This thesis proposes a scheme combining distributed storage of the content in multiple servers and an efficient coded caching algorithm for delivery to the users. This scheme is shown to reduce the peak transmission rate below that of state-of-the-art algorithms

상변화 메모리 시스템의 간섭 오류 완화 및 RMW 성능 향상 기법

학위논문(박사)--서울대학교 대학원 :공과대학 전기·정보공학부,2021. 8. 이혁재.Phase-change memory (PCM) announces the beginning of the new era of memory systems, owing to attractive characteristics. Many memory product manufacturers (e.g., Intel, SK Hynix, and Samsung) are developing related products. PCM can be applied to various circumstances; it is not simply limited to an extra-scale database. For example, PCM has a low standby power due to its non-volatility; hence, computation-intensive applications or mobile applications (i.e., long memory idle time) are suitable to run on PCM-based computing systems. The second problem of PCM is a long-latency compared to that of DRAM. In particular, PCM tries to enhance its throughput by adopting a larger transaction unit; however, the different unit size from the general-purpose processor cache line further degrades the system performance due to the introduction of a read-modify-write (RMW) module. Since there has never been any research related to RMW in a PCM-based memory system, this dissertation proposes a novel architecture to enhance the overall system performance and reliability of a PCM-based memory system having an RMW module. The proposed architecture enhances data re-usability without introducing extra storage resources. Furthermore, a novel operation that merges commands regardless of command types is proposed to enhance performance notably.Despite these fascinating features of PCM, PCM is still far from the general commercial market due to low reliability and long latency problems. In particular, low reliability is a painful problem for PCM in past decades. As the semiconductor process technology rapidly scales down over the years, DRAM reaches 10 nm class process technology. In addition, it is reported that the write disturbance error (WDE) would be a serious issue for PCM if it scales down below 54 nm class process technology. Therefore, addressing the problem of WDEs becomes essential to make PCM competitive to DRAM. To overcome this problem, this dissertation proposes a novel approach that can restore meta-stable cells on demand by levering two-level SRAM-based tables, thereby significantly reducing the number WDEs. Furthermore, a novel randomized approach is proposed to implement a replacement policy that originally requires hundreds of read ports on SRAM.Another problem is the absence of a full simulation platform for PCM. While the announced features of the PCM-related product (i.e., Intel Optane) are scarce due to confidential issues, all priceless information can be integrated to develop an architecture simulator that resembles the available product. To this end, this dissertation tries to scrape up all available features of modules in a PCM controller and implement a dedicated simulator for future research purposes

On the design of efficient caching systems

Content distribution is currently the prevalent Internet use case, accounting for the majority of global Internet traffic and growing exponentially. There is general consensus that the most effective method to deal with the large amount of content demand is through the deployment of massively distributed caching infrastructures as the means to localise content delivery traffic. Solutions based on caching have been already widely deployed through Content Delivery Networks. Ubiquitous caching is also a fundamental aspect of the emerging Information-Centric Networking paradigm which aims to rethink the current Internet architecture for long term evolution. Distributed content caching systems are expected to grow substantially in the future, in terms of both footprint and traffic carried and, as such, will become substantially more complex and costly. This thesis addresses the problem of designing scalable and cost-effective distributed caching systems that will be able to efficiently support the expected massive growth of content traffic and makes three distinct contributions. First, it produces an extensive theoretical characterisation of sharding, which is a widely used technique to allocate data items to resources of a distributed system according to a hash function. Based on the findings unveiled by this analysis, two systems are designed contributing to the abovementioned objective. The first is a framework and related algorithms for enabling efficient load-balanced content caching. This solution provides qualitative advantages over previously proposed solutions, such as ease of modelling and availability of knobs to fine-tune performance, as well as quantitative advantages, such as 2x increase in cache hit ratio and 19-33% reduction in load imbalance while maintaining comparable latency to other approaches. The second is the design and implementation of a caching node enabling 20 Gbps speeds based on inexpensive commodity hardware. We believe these contributions advance significantly the state of the art in distributed caching systems

Flashing up the storage hierarchy

The focus of this thesis is on systems that employ both flash and magnetic disks as storage media. Considering the widely disparate I/O costs of flash disks currently on the market, our approach is a cost-aware one: we explore techniques that exploit the I/O costs of the underlying storage devices to improve I/O performance. We also study the asymmetric I/O properties of magnetic and flash disks and propose algorithms that take advantage of this asymmetry. Our work is geared towards database systems; however, most of the ideas presented in this thesis can be generalised to any data-intensive application. For the case of low-end, inexpensive flash devices with large capacities, we propose using them at the same level of the memory hierarchy as magnetic disks. In such setups, we study the problem of data placement, that is, on which type of storage medium each data page should be stored. We present a family of online algorithms that can be used to dynamically decide the optimal placement of each page. Our algorithms adapt to changing workloads for maximum I/O efficiency. We found that substantial performance benefits can be gained with such a design, especially for queries touching large sets of pages with read-intensive workloads. Moving one level higher in the storage hierarchy, we study the problem of buffer allocation in databases that store data across multiple storage devices. We present our novel approach to per-device memory allocation, under which both the I/O costs of the storage devices and the cache behaviour of the data stored on each medium determine the size of the main memory buffers that will be allocated to each device. Towards informed decisions, we found that the ability to predict the cache behaviour of devices under various cache sizes is of paramount importance. In light of this, we study the problem of efficiently tracking the hit ratio curve for each device and introduce a lowoverhead technique that provides high accuracy. The price and performance characteristics of high-end flash disks make them perfectly suitable for use as caches between the main memory and the magnetic disk(s) of a storage system. In this context, we primarily focus on the problem of deciding which data should be placed in the flash cache of a system: how the data flows from one level of the memory hierarchy to the others is crucial for the performance of such a system. Considering such decisions, we found that the I/O costs of the flash cache play a major role. We also study several implementation issues such as the optimal size of flash pages and the properties of the page directory of a flash cache. Finally, we explore sorting in external memory using external merge-sort, as the latter employs access patterns that can take full advantage of the I/O characteristics of flash memory. We study the problem of sorting hierarchical data, as such is necessary for a wide variety of applications including archiving scientific data and dealing with large XML datasets. The proposed algorithm efficiently exploits the hierarchical structure in order to minimize the number of disk accesses and optimise the utilization of available memory. Our proposals are not specific to sorting over flash memory: the presented techniques are highly efficient over magnetic disks as well