440 research outputs found

    SMF-POLOPT: an adaptive multitemporal pol(DIn)SAR filtering and phase optimization algorithm for PSI applications

    Get PDF
    © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Speckle noise and decorrelation can hamper the application and interpretation of PolSAR images. In this paper, a new adaptive multitemporal Pol(DIn)SAR filtering and phase optimization algorithm is proposed to address these limitations. This algorithm first categorizes and adaptively filters permanent scatterer (PS) and distributed scatterer (DS) pixels according to their polarimetric scattering mechanisms [i.e., the scattering-mechanism-based filtering (SMF)]. Then, two different polarimetric DInSAR (POLDInSAR) phase OPTimization methods are applied separately on the filtered PS and DS pixels (i.e., POLOPT). Finally, an inclusive pixel selection approach is used to identify high-quality pixels for ground deformation estimation. Thirty-one full-polarization Radarsat-2 SAR images over Barcelona (Spain) and 31 dual-polarization TerraSAR-X images over Murcia (Spain) have been used to evaluate the performance of the proposed algorithm. The PolSAR filtering results show that the speckle of PolSAR images has been well reduced with the preservation of details by the proposed SMF. The obtained ground deformation monitoring results have shown significant improvements, about ×7.2 (the full-polarization case) and ×3.8 (the dual-polarization case) with respect to the classical full-resolution single-pol amplitude dispersion method, on the valid pixels' densities. The excellent PolSAR filtering and ground deformation monitoring results achieved by the adaptive Pol(DIn)SAR filtering and phase optimization algorithm (i.e., the SMF-POLOPT) have validated the effectiveness of this proposed scheme.Peer ReviewedPostprint (author's final draft

    Advances in Radar Remote Sensing of Agricultural Crops: A Review

    Get PDF
    There are enormous advantages of a review article in the field of emerging technology like radar remote sensing applications in agriculture. This paper aims to report select recent advancements in the field of Synthetic Aperture Radar (SAR) remote sensing of crops. In order to make the paper comprehensive and more meaningful for the readers, an attempt has also been made to include discussion on various technologies of SAR sensors used for remote sensing of agricultural crops viz. basic SAR sensor, SAR interferometry (InSAR), SAR polarimetry (PolSAR) and polarimetric interferometry SAR (PolInSAR). The paper covers all the methodologies used for various agricultural applications like empirically based models, machine learning based models and radiative transfer theorem based models. A thorough literature review of more than 100 research papers indicates that SAR polarimetry can be used effectively for crop inventory and biophysical parameters estimation such are leaf area index, plant water content, and biomass but shown less sensitivity towards plant height as compared to SAR interferometry. Polarimetric SAR Interferometry is preferable for taking advantage of both SAR polarimetry and SAR interferometry. Numerous studies based upon multi-parametric SAR indicate that optimum selection of SAR sensor parameters enhances SAR sensitivity as a whole for various agricultural applications. It has been observed that researchers are widely using three models such are empirical, machine learning and radiative transfer theorem based models. Machine learning based models are identified as a better approach for crop monitoring using radar remote sensing data. It is expected that the review article will not only generate interest amongst the readers to explore and exploit radar remote sensing for various agricultural applications but also provide a ready reference to the researchers working in this field

    Polarimetric Synthetic Aperture Radar

    Get PDF
    This open access book focuses on the practical application of electromagnetic polarimetry principles in Earth remote sensing with an educational purpose. In the last decade, the operations from fully polarimetric synthetic aperture radar such as the Japanese ALOS/PalSAR, the Canadian Radarsat-2 and the German TerraSAR-X and their easy data access for scientific use have developed further the research and data applications at L,C and X band. As a consequence, the wider distribution of polarimetric data sets across the remote sensing community boosted activity and development in polarimetric SAR applications, also in view of future missions. Numerous experiments with real data from spaceborne platforms are shown, with the aim of giving an up-to-date and complete treatment of the unique benefits of fully polarimetric synthetic aperture radar data in five different domains: forest, agriculture, cryosphere, urban and oceans

    Polarization Optimization for the Detection of Multiple Persistent Scatterers Using SAR Tomography

    Get PDF
    The detection of multiple interfering persistent scatterers (PSs) using Synthetic Aperture Radar (SAR) tomography is an efficient tool for generating point clouds of urban areas. In this context, detection methods based upon the polarization information of SAR data are effective at increasing the number of PSs and producing high-density point clouds. This paper presents a comparative study on the effects of the polarization design of a radar antenna on further improving the probability of detecting persistent scatterers. For this purpose, we introduce an extension of the existing scattering property-based generalized likelihood ratio test (GLRT) with realistic dependence on the transmitted/received polarizations. The test is based upon polarization basis optimization by synthesizing all possible polarimetric responses of a given scatterer from its measurements on a linear orthonormal basis. Experiments on both simulated and real data show, by means of objective metrics (probability of detection, false alarm rate, and signal-to-noise ratio), that polarization waveform optimization can provide a significant performance gain in the detection of multiple scatterers compared to the existing full-polarization-based detection method. In particular, the increased density of detected PSs at the studied test sites demonstrates the main contribution of the proposed method

    Assessment of the Contribution of Polarimetric Persistent Scatterer Interferometry on Sentinel-1 Data

    Get PDF
    Time series of Sentinel-1 data are widely used for monitoring displacements of the Earth surface using persistent scatterer interferometry. By default over land, Sentinel-1 images include two polarimetric channels: VV and VH. However, most works in this application exploit only the VV channel, whereas the VH channel is discarded for its lower amplitude. Thanks to the development of polarimetric persistent scatterer interferometry methods, one can integrate multi-polarisation channels into a single optimal one. Previous studies proved that the number and spatial density of measurement points is increased. In this work, we explore the reason why the VH channel increases the number of measurement points when using the amplitude dispersion ( DA ) as selection criterion. Results obtained over three geographical locations show that the VH channel helps in two ways. In first place, the mean amplitude is increased for targets which have higher amplitude in VH channel, usually associated with rotated elements in the scene. In second place, and more importantly, the amplitude dispersion is decreased over many areas for which the VV channel exhibits fluctuations and peaks. Thanks to the insensitivity of the VH channel to these scene changes, it provides additional measurement points which are reliable despite their low amplitude. The increment of measurement points not only extends the spatial density and enables the detection of active deformation areas not found in the VV results, but also provides more accurate results than only using the VV channel, thanks to the increased density of points, which helps the deformation estimation.This work was supported by the Spanish Ministry of Science and Innovation (State Agency of Research, AEI) and the European Funds for Regional Development (EFRD) under Projects PID2020-117303GB-C21 and PID2020-117303GB-C22. The research was carried out partially in the framework of the ESA-MOST China DRAGON-5 project with ref. 59339

    New SAR Target Imaging Algorithm based on Oblique Projection for Clutter Reduction

    Get PDF
    International audienceWe have developed a new Synthetic Aperture Radar (SAR) algorithm based on physical models for the detection of a Man-Made Target (MMT) embedded in strong clutter (trunks in a forest). The physical models for the MMT and the clutter are represented by low-rank subspaces and are based on scattering and polarimetric properties. Our SAR algorithm applies the oblique projection of the received signal along the clutter subspace onto the target subspace. We compute its statistical performance in terms of probabilities of detection and false alarms. The performances of the proposed SAR algorithm are improved compared to those obtained with existing SAR algorithms: the MMT detection is greatly improved and the clutter is rejected. We also studied the robustness of our new SAR algorithm to interference modeling errors. Results on real FoPen (Foliage Penetration) data showed the usefulness of this approach

    Polarimetric Approaches for Persistent Scatterers Interferometry

    Get PDF
    In previous works, a general framework to exploit polarimetric diversity to optimize the results of persistent scatterers interferometry (PSI) was presented, but tested only with dual-pol data. In this paper, the performance of these algorithms is assessed using fully polarimetric data, acquired by the Radarsat-2 satellite over the urban area of Barcelona, Spain. In addition, two new highly efficient polarimetric optimization methods, mean intensity polarimetric optimization and joint diagonalization-based polarimetric optimization, are introduced and evaluated. Given the variety of dual-pol configurations provided by current polarimetric satellites, such as TerraSAR-X and Radarsat-2, and the upcoming launch of Sentinel-1, ALOS-2, and Radarsat Constellation Mission, a study has been also carried out to determine the best performing dual-pol configurations for polarimetric PSI. Subsidence maps of the area of study are computed for single-pol, dual-pol, and full-pol data, which show the increase in pixel density with valid deformation results as more polarimetric information is made available. In particular, for full-pol data we get an increase of up to 2.5 times more pixels for coherence-based PSI techniques (degraded resolution), and over four times more for amplitude-based approaches (full resolution), in comparison with single-pol data. Both higher density and quality of pixels yield better results in terms of coverage and accuracy.This work was supported in part by the Spanish Ministerio de EconomĂ­a y Competitividad and European Union FEDER funds under Project TEC2011-28201-C02-02

    Study of the speckle noise effects over the eigen decomposition of polarimetric SAR data: a review

    No full text
    This paper is focused on considering the effects of speckle noise on the eigen decomposition of the co- herency matrix. Based on a perturbation analysis of the matrix, it is possible to obtain an analytical expression for the mean value of the eigenvalues and the eigenvectors, as well as for the Entropy, the Anisotroopy and the dif- ferent a angles. The analytical expressions are compared against simulated polarimetric SAR data, demonstrating the correctness of the different expressions.Peer ReviewedPostprint (published version

    Cryosphere Applications

    Get PDF
    Synthetic aperture radar (SAR) provides large coverage and high resolution, and it has been proven to be sensitive to both surface and near-surface features related to accumulation, ablation, and metamorphism of snow and firn. Exploiting this sensitivity, SAR polarimetry and polarimetric interferometry found application to land ice for instance for the estimation of wave extinction (which relates to sub surface ice volume structure) and for the estimation of snow water equivalent (which relates to snow density and depth). After presenting these applications, the Chapter proceeds by reviewing applications of SAR polarimetry to sea ice for the classification of different ice types, the estimation of thickness, and the characterisation of its surface. Finally, an application to the characterisation of permafrost regions is considered. For each application, the used (model-based) decomposition and polarimetric parameters are critically described, and real data results from relevant airborne campaigns and space borne acquisitions are reported
    • …
    corecore