Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

A Hybrid Partially Reconfigurable Overlay Supporting Just-In-Time Assembly of Custom Accelerators on FPGAs

The state of the art in design and development flows for FPGAs are not sufficiently mature to allow programmers to implement their applications through traditional software development flows. The stipulation of synthesis as well as the requirement of background knowledge on the FPGAs\u27 low-level physical hardware structure are major challenges that prevent programmers from using FPGAs. The reconfigurable computing community is seeking solutions to raise the level of design abstraction at which programmers must operate, and move the synthesis process out of the programmers\u27 path through the use of overlays. A recent approach, Just-In-Time Assembly (JITA), was proposed that enables hardware accelerators to be assembled at runtime, all from within a traditional software compilation flow. The JITA approach presents a promising path to constructing hardware designs on FPGAs using pre-synthesized parallel programming patterns, but suffers from two major limitations. First, all variant programming patterns must be pre-synthesized. Second, conditional operations are not supported. In this thesis, I present a new reconfigurable overlay, URUK, that overcomes the two limitations imposed by the JITA approach. Similar to the original JITA approach, the proposed URUK overlay allows hardware accelerators to be constructed on FPGAs through software compilation flows. To this basic capability, URUK adds additional support to enable the assembly of presynthesized fine-grained computational operators to be assembled within the FPGA. This thesis provides analysis of URUK from three different perspectives; utilization, performance, and productivity. The analysis includes comparisons against High-Level Synthesis (HLS) and the state of the art approach to creating static overlays. The tradeoffs conclude that URUK can achieve approximately equivalent performance for algebra operations compared to HLS custom accelerators, which are designed with simple experience on FPGAs. Further, URUK shows a high degree of flexibility for runtime placement and routing of the primitive operations. The analysis shows how this flexibility can be leveraged to reduce communication overhead among tiles, compared to traditional static overlays. The results also show URUK can enable software programmers without any hardware skills to create hardware accelerators at productivity levels consistent with software development and compilation

Compiler and Architecture Design for Coarse-Grained Programmable Accelerators

abstract: The holy grail of computer hardware across all market segments has been to sustain performance improvement at the same pace as silicon technology scales. As the technology scales and the size of transistors shrinks, the power consumption and energy usage per transistor decrease. On the other hand, the transistor density increases significantly by technology scaling. Due to technology factors, the reduction in power consumption per transistor is not sufficient to offset the increase in power consumption per unit area. Therefore, to improve performance, increasing energy-efficiency must be addressed at all design levels from circuit level to application and algorithm levels. At architectural level, one promising approach is to populate the system with hardware accelerators each optimized for a specific task. One drawback of hardware accelerators is that they are not programmable. Therefore, their utilization can be low as they perform one specific function. Using software programmable accelerators is an alternative approach to achieve high energy-efficiency and programmability. Due to intrinsic characteristics of software accelerators, they can exploit both instruction level parallelism and data level parallelism. Coarse-Grained Reconfigurable Architecture (CGRA) is a software programmable accelerator consists of a number of word-level functional units. Motivated by promising characteristics of software programmable accelerators, the potentials of CGRAs in future computing platforms is studied and an end-to-end CGRA research framework is developed. This framework consists of three different aspects: CGRA architectural design, integration in a computing system, and CGRA compiler. First, the design and implementation of a CGRA and its instruction set is presented. This design is then modeled in a cycle accurate system simulator. The simulation platform enables us to investigate several problems associated with a CGRA when it is deployed as an accelerator in a computing system. Next, the problem of mapping a compute intensive region of a program to CGRAs is formulated. From this formulation, several efficient algorithms are developed which effectively utilize CGRA scarce resources very well to minimize the running time of input applications. Finally, these mapping algorithms are integrated in a compiler framework to construct a compiler for CGRADissertation/ThesisDoctoral Dissertation Computer Science 201

Flip: Data-Centric Edge CGRA Accelerator

Coarse-Grained Reconfigurable Arrays (CGRA) are promising edge accelerators due to the outstanding balance in flexibility, performance, and energy efficiency. Classic CGRAs statically map compute operations onto the processing elements (PE) and route the data dependencies among the operations through the Network-on-Chip. However, CGRAs are designed for fine-grained static instruction-level parallelism and struggle to accelerate applications with dynamic and irregular data-level parallelism, such as graph processing. To address this limitation, we present Flip, a novel accelerator that enhances traditional CGRA architectures to boost the performance of graph applications. Flip retains the classic CGRA execution model while introducing a special data-centric mode for efficient graph processing. Specifically, it exploits the natural data parallelism of graph algorithms by mapping graph vertices onto processing elements (PEs) rather than the operations, and supporting dynamic routing of temporary data according to the runtime evolution of the graph frontier. Experimental results demonstrate that Flip achieves up to 36$\times$ speedup with merely 19% more area compared to classic CGRAs. Compared to state-of-the-art large-scale graph processors, Flip has similar energy efficiency and 2.2$\times$ better area efficiency at a much-reduced power/area budget

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability