Signal estimation in cognitive satellite networks for satellite-based industrial internet of things

Satellite industrial Internet of Things (IIoT) plays an important role in industrial manufactures without requiring the support of terrestrial infrastructures. However, due to the scarcity of spectrum resources, existing satellite frequency bands cannot satisfy the demand of IIoT, which have to explore other available spectrum resources. Cognitive satellite networks are promising technologies and have the potential to alleviate the shortage of spectrum resources and enhance spectrum efficiency by sharing both spectral and spatial degrees of freedom. For effective signal estimations, multiple features of wireless signals are needed at receivers, the transmissions of which may cause considerable overhead. To mitigate the overhead, part of parameters, such as modulation order, constellation type, and signal to noise ratio (SNR), could be obtained at receivers through signal estimation rather than transmissions from transmitters to receivers. In this article, a grid method is utilized to process the constellation map to obtain its equivalent probability density function. Then, binary feature matrix of the probability density function is employed to construct a cost function to estimate the modulation order and constellation type for multiple quadrature amplitude modulation (MQAM) signal. Finally, an improved M 2 M ∞ method is adopted to realize the SNR estimation of MQAM. Simulation results show that the proposed method is able to accurately estimate the modulation order, constellation type, and SNR of MQAM signal, and these features are extremely useful in satellite-based IIoT

ANFIS Based Data Rate Prediction For Cognitive Radio

Intelligence is needed to keep up with the rapid evolution of wireless communications, especially in terms of managing and allocating the scarce, radio spectrum in the highly varying and disparate modern environments. Cognitive radio systems promise to handle this situation by utilizing intelligent software packages that enrich their transceiver with radio-awareness, adaptability and capability to learn. A cognitive radio system participates in a continuous process, the ‘‘cognition cycle”, during which it adjusts its operating parameters, observes the results and, eventually takes actions, that is to say, decides to operate in a specific radio configuration (i.e., radio access technology, carrier frequency, modulation type, etc.) expecting to move the radio toward some optimized operational state. In such a process, learning mechanisms utilize information from measurements sensed from the environment, gathered experience and stored knowledge and guide in decision making. This thesis introduces and evaluates learning schemes that are based on adaptive neuro-fuzzy inference system (ANFIS) for predicting the capabilities (e.g. data rate) that can be achieved by a specific radio configuration in cognitive radio. First a ANFIS based scheme is proposed. The work reported here is compare previous neural network based learning schemes. Cognitive radio is a intelligent emergent technology, where learning schemes are needed to assist in its functioning. ANFIS based scheme is one of the good learning Artificial intelligence method, that combines best features of neural network and fuzzy logic. Here ANFIS and neural networks methods are able to assist a cognitive radio system to help in selecting the best one radio configuration to operate in. Performance metric like RMSE, prediction accuracy of ANFIS learning has been used as performance index

Survey on Additive Manufacturing, Cloud 3D Printing and Services

Cloud Manufacturing (CM) is the concept of using manufacturing resources in a service oriented way over the Internet. Recent developments in Additive Manufacturing (AM) are making it possible to utilise resources ad-hoc as replacement for traditional manufacturing resources in case of spontaneous problems in the established manufacturing processes. In order to be of use in these scenarios the AM resources must adhere to a strict principle of transparency and service composition in adherence to the Cloud Computing (CC) paradigm. With this review we provide an overview over CM, AM and relevant domains as well as present the historical development of scientific research in these fields, starting from 2002. Part of this work is also a meta-review on the domain to further detail its development and structure

Applications of analysis and synthesis techniques for complex sounds

Master'sMASTER OF SCIENC

Mass Customization of Cloud Services - Engineering, Negotiation and Optimization

Several challenges hinder the entry of mass customization principles into Cloud computing: Firstly, the service engineering on provider side needs to be automated. Secondly, there has to be a suitable negotiation mechanism helping provider and consumer on finding an agreement on Quality-of-Service and price. Thirdly, finding the optimal configuration requires adequate and efficient optimization techniques. The work at hand addresses these challenges through technical and economic contributions

Fault Detection and Identification in Computer Networks: A soft Computing Approach

Governmental and private institutions rely heavily on reliable computer networks for their everyday business transactions. The downtime of their infrastructure networks may result in millions of dollars in cost. Fault management systems are used to keep today’s complex networks running without significant downtime cost, either by using active techniques or passive techniques. Active techniques impose excessive management traffic, whereas passive techniques often ignore uncertainty inherent in network alarms,leading to unreliable fault identification performance. In this research work, new algorithms are proposed for both types of techniques so as address these handicaps. Active techniques use probing technology so that the managed network can be tested periodically and suspected malfunctioning nodes can be effectively identified and isolated. However, the diagnosing probes introduce extra management traffic and storage space. To address this issue, two new CSP (Constraint Satisfaction Problem)-based algorithms are proposed to minimize management traffic, while effectively maintain the same diagnostic power of the available probes. The first algorithm is based on the standard CSP formulation which aims at reducing the available dependency matrix significantly as means to reducing the number of probes. The obtained probe set is used for fault detection and fault identification. The second algorithm is a fuzzy CSP-based algorithm. This proposed algorithm is adaptive algorithm in the sense that an initial reduced fault detection probe set is utilized to determine the minimum set of probes used for fault identification. Based on the extensive experiments conducted in this research both algorithms have demonstrated advantages over existing methods in terms of the overall management traffic needed to successfully monitor the targeted network system. Passive techniques employ alarms emitted by network entities. However, the fault evidence provided by these alarms can be ambiguous, inconsistent, incomplete, and random. To address these limitations, alarms are correlated using a distributed Dempster-Shafer Evidence Theory (DSET) framework, in which the managed network is divided into a cluster of disjoint management domains. Each domain is assigned an Intelligent Agent for collecting and analyzing the alarms generated within that domain. These agents are coordinated by a single higher level entity, i.e., an agent manager that combines the partial views of these agents into a global one. Each agent employs DSET-based algorithm that utilizes the probabilistic knowledge encoded in the available fault propagation model to construct a local composite alarm. The Dempster‘s rule of combination is then used by the agent manager to correlate these local composite alarms. Furthermore, an adaptive fuzzy DSET-based algorithm is proposed to utilize the fuzzy information provided by the observed cluster of alarms so as to accurately identify the malfunctioning network entities. In this way, inconsistency among the alarms is removed by weighing each received alarm against the others, while randomness and ambiguity of the fault evidence are addressed within soft computing framework. The effectiveness of this framework has been investigated based on extensive experiments. The proposed fault management system is able to detect malfunctioning behavior in the managed network with considerably less management traffic. Moreover, it effectively manages the uncertainty property intrinsically contained in network alarms,thereby reducing its negative impact and significantly improving the overall performance of the fault management system

Machine Learning

Machine Learning can be defined in various ways related to a scientific domain concerned with the design and development of theoretical and implementation tools that allow building systems with some Human Like intelligent behavior. Machine learning addresses more specifically the ability to improve automatically through experience

Survivable cloud multi-robotics framework for heterogeneous environments

The emergence of cloud computing has transformed the potential of robotics by enabling multi-robotic teams to fulfil complex tasks in the cloud. This paradigm is known as “cloud robotics” and relieves robots from hardware and software limitations, as large amounts of available resources and parallel computing capabilities are available in the cloud. The introduction of cloud-enabled robots alleviates the need for computationally intensive robots to be built, as many, if not all, of the CPU-intensive tasks can be offloaded into the cloud, resulting in multi-robots that require much less power, energy consumption and on-board processing units. While the benefits of cloud robotics are clearly evident and have resulted in an increase in interest among the scientific community, one of the biggest challenges of cloud robotics is the inherent communication challenges brought about by disconnections between the multi-robotic system and the cloud. The communication delays brought about by the cloud disconnection results in robots not being able to receive and transmit data to the physical cloud. The unavailability of these robotic services in certain instances could prove fatal in a heterogeneous environment that requires multi-robotic teams to assist with the saving of human lives. This niche area is relatively unexplored in the literature. This work serves to assist with the challenge of disconnection in cloud robotics by proposing a survivable cloud multi-robotics (SCMR) framework for heterogeneous environments. The SCMR framework leverages the combination of a virtual ad hoc network formed by the robot-to-robot communication and a physical cloud infrastructure formed by the robot-to-cloud communications. The Quality of Service (QoS) on the SCMR framework is tested and validated by determining the optimal energy utilization and Time of Response (ToR) on drivability analysis with and without cloud connection. The experimental results demonstrate that the proposed framework is feasible for current multi-robotic applications and shows the survivability aspect of the framework in instances of cloud disconnection.School of ComputingM.Sc. (Computer Science