Satellite on-board processing for earth resources data

Results of a survey of earth resources user applications and their data requirements, earth resources multispectral scanner sensor technology, and preprocessing algorithms for correcting the sensor outputs and for data bulk reduction are presented along with a candidate data format. Computational requirements required to implement the data analysis algorithms are included along with a review of computer architectures and organizations. Computer architectures capable of handling the algorithm computational requirements are suggested and the environmental effects of an on-board processor discussed. By relating performance parameters to the system requirements of each of the user requirements the feasibility of on-board processing is determined for each user. A tradeoff analysis is performed to determine the sensitivity of results to each of the system parameters. Significant results and conclusions are discussed, and recommendations are presented

A model of technological progress in the microprocessor industry

This paper develops a model of technological progress in the microprocessor industry that connects the seemingly disparate engineering and economic measures of technological progress. Technological progress in the microprocessor industry is driven by the repeated adoption of higher quality vintages of capital equipment produced by the upstream semiconductor equipment industry. The model characterizes the optimal adoption decision of a microprocessor firm and the resulting rate of technological progress. In conjunction with parameters estimated using a new dataset of the microprocessor industry, the model suggests explanations for the acceleration in technological progress during 1990-2000 and the subsequent slowdown.Technology Adoption, Microprocessors

Trends in hardware architecture for mobile devices

In the last ten years, two main factors have fueled the steady growth in sales of mobile computing and communication devices: a) the reduction of the footprint of the devices themselves, such as cellular handsets and small computers; and b) the success in developing low-power hardware which allows the devices to operate autonomously for hours or even days. In this review, I show that the first generation of mobile devices was DSP centric – that is, its architecture was based in fast processing of digitized signals using low- power, yet numerically powerful DSPs. However, the next generation of mobile devices will be built around DSPs and low power microprocessor cores for general processing applications. Mobile devices will become data-centric. The main challenge for designers of such hybrid architectures is to increase the computational performance of the computing unit, while keeping power constant, or even reducing it. This report shows that low-power mobile hardware architectures design goes hand in hand with advances in compiling techniques. We look at the synergy between hardware and software, and show that a good balance between both can lead to innovative lowpower processor architectures

Thermal/performance trade-off in network-on-chip architectures

Multi-core architectures are a promising paradigm to exploit the huge integration density reached by high-performance systems. Indeed, integration density and technology scaling are causing undesirable operating temperatures, having net impact on reduced reliability and increased cooling costs. Dynamic Thermal Management (DTM) approaches have been proposed in literature to control temperature profile at run-time, while design-time approaches generally provide floorplan-driven solutions to cope with temperature constraints. Nevertheless, a suitable approach to collect performance, thermal and reliability metrics has not been proposed, yet. This work presents a novel methodology to jointly optimize temperature/performance trade-off in reliable high-performance parallel architectures with security constraints achieved by workload physical isolation on each core. The proposed methodology is based on a linear formal model relating temperature and duty-cycle on one side, and performance and duty-cycle on the other side. Extensive experimental results on real-world use-case scenarios show the goodness of the proposed model, suitable for design-time system-wide optimization to be used in conjunction with DTM technique

Hardware-software codesign in a high-level synthesis environment

Interfacing hardware-oriented high-level synthesis to software development is a computationally hard problem for which no general solution exists. Under special conditions, the hardware-software codesign (system-level synthesis) problem may be analyzed with traditional tools and efficient heuristics. This dissertation introduces a new alternative to the currently used heuristic methods. The new approach combines the results of top-down hardware development with existing basic hardware units (bottom-up libraries) and compiler generation tools. The optimization goal is to maximize operating frequency or minimize cost with reasonable tradeoffs in other properties. The dissertation research provides a unified approach to hardware-software codesign. The improvements over previously existing design methodologies are presented in the frame-work of an academic CAD environment (PIPE). This CAD environment implements a sufficient subset of functions of commercial microelectronics CAD packages. The results may be generalized for other general-purpose algorithms or environments. Reference benchmarks are used to validate the new approach. Most of the well-known benchmarks are based on discrete-time numerical simulations, digital filtering applications, and cryptography (an emerging field in benchmarking). As there is a need for high-performance applications, an additional requirement for this dissertation is to investigate pipelined hardware-software systems\u27 performance and design methods. The results demonstrate that the quality of existing heuristics does not change in the enhanced, hardware-software environment

H-SIMD machine : configurable parallel computing for data-intensive applications

This dissertation presents a hierarchical single-instruction multiple-data (H-SLMD) configurable computing architecture to facilitate the efficient execution of data-intensive applications on field-programmable gate arrays (FPGAs). H-SIMD targets data-intensive applications for FPGA-based system designs. The H-SIMD machine is associated with a hierarchical instruction set architecture (HISA) which is developed for each application. The main objectives of this work are to facilitate ease of program development and high performance through ease of scheduling operations and overlapping communications with computations. The H-SIMD machine is composed of the host, FPGA and nano-processor layers. They execute host SIMD instructions (HSIs), FPGA SIMD instructions (FSIs) and nano-processor instructions (NPLs), respectively. A distinction between communication and computation instructions is intended for all the HISA layers. The H-SIMD machine also employs a memory switching scheme to bridge the omnipresent large bandwidth gaps in configurable systems. To showcase the proposed high-performance approach, the conditions to fully overlap communications with computations are investigated for important applications. The building blocks in the H-SLMD machine, such as high-performance and area-efficient register files, are presented in detail. The H-SLMD machine hierarchy is implemented on a host Dell workstation and the Annapolis Wildstar II FPGA board. Significant speedups have been achieved for matrix multiplication (MM), 2-dimensional discrete cosine transform (2D DCT) and 2-dimensional fast Fourier transform (2D FFT) which are used widely in science and engineering. In another FPGA-based programming paradigm, a high-level language (here ANSI C) can be used to program the FPGAs in a mode similar to that of the H-SIMD machine in terms of trying to minimize the effect of overheads. More specifically, a multi-threaded overlapping scheme is proposed to reduce as much as possible, or even completely hide, runtime FPGA reconfiguration overheads. Nevertheless, although the HLL-enabled reconfigurable machine allows software developers to customize FPGA functions easily, special architecture techniques are needed to achieve high-performance without significant penalty on area and clock frequency. Two important high-performance applications, matrix multiplication and image edge detection, are tested on the SRC-6 reconfigurable machine. The implemented algorithms are able to exploit the available data parallelism with independent functional units and application-specific cache support. Relevant performance and design tradeoffs are analyzed