Exploiting Application Behaviors for Resilient Static Random Access Memory Arrays in the Near-Threshold Computing Regime

Near-Threshold Computing embodies an intriguing choice for mobile processors due to the promise of superior energy efficiency, extending the battery life of these devices while reducing the peak power draw. However, process, voltage, and temperature variations cause a significantly high failure rate of Level One cache cells in the near-threshold regime a stark contrast to designs in the super-threshold regime, where fault sites are rare. This thesis work shows that faulty cells in the near-threshold regime are highly clustered in certain regions of the cache. In addition, popular mobile benchmarks are studied to investigate the impact of run-time workloads on timing faults manifestation. A technique to mitigate the run-time faults is proposed. This scheme maps frequently used data to healthy cache regions by exploiting the application cache behaviors. The results show up to 78% gain in performance over two other state-of-the-art techniques

Exploiting Adaptive Techniques to Improve Processor Energy Efficiency

Rapid device-miniaturization keeps on inducing challenges in building energy efficient microprocessors. As the size of the transistors continuously decreasing, more uncertainties emerge in their operations. On the other hand, integrating more and more transistors on a single chip accentuates the need to lower its supply-voltage. This dissertation investigates one of the primary device uncertainties - timing error, in microprocessor performance bottleneck in NTC era. Then it proposes various innovative techniques to exploit these opportunities to maintain processor energy efficiency, in the context of emerging challenges. Evaluated with the cross-layer methodology, the proposed approaches achieve substantial improvements in processor energy efficiency, compared to other start-of-art techniques

Exploiting Natural On-chip Redundancy for Energy Efficient Memory and Computing

Power density is currently the primary design constraint across most computing segments and the main performance limiting factor. For years, industry has kept power density constant, while increasing frequency, lowering transistors supply (Vdd) and threshold (Vth) voltages. However, Vth scaling has stopped because leakage current is exponentially related to it. Transistor count and integration density keep doubling every process generation (Moore’s Law), but the power budget caps the amount of hardware that can be active at the same time, leading to dark silicon. With each new generation, there are more resources available, but we cannot fully exploit their performance potential. In the last years, different research trends have explored how to cope with dark silicon and unlock the energy efficiency of the chips, including Near-Threshold voltage Computing (NTC) and approximate computing. NTC aggressively lowers Vdd to values near Vth. This allows a substantial reduction in power, as dynamic power scales quadratically with supply voltage. The resultant power reduction could be used to activate more chip resources and potentially achieve performance improvements. Unfortunately, Vdd scaling is limited by the tight functionality margins of on-chip SRAM transistors. When scaling Vdd down to values near-threshold, manufacture-induced parameter variations affect the functionality of SRAM cells, which eventually become not reliable. A large amount of emerging applications, on the other hand, features an intrinsic error-resilience property, tolerating a certain amount of noise. In this context, approximate computing takes advantage of this observation and exploits the gap between the level of accuracy required by the application and the level of accuracy given by the computation, providing that reducing the accuracy translates into an energy gain. However, deciding which instructions and data and which techniques are best suited for approximation still poses a major challenge. This dissertation contributes in these two directions. First, it proposes a new approach to mitigate the impact of SRAM failures due to parameter variation for effective operation at ultra-low voltages. We identify two levels of natural on-chip redundancy: cache level and content level. The first arises because of the replication of blocks in multi-level cache hierarchies. We exploit this redundancy with a cache management policy that allocates blocks to entries taking into account the nature of the cache entry and the use pattern of the block. This policy obtains performance improvements between 2% and 34%, with respect to block disabling, a technique with similar complexity, incurring no additional storage overhead. The latter (content level redundancy) arises because of the redundancy of data in real world applications. We exploit this redundancy compressing cache blocks to fit them in partially functional cache entries. At the cost of a slight overhead increase, we can obtain performance within 2% of that obtained when the cache is built with fault-free cells, even if more than 90% of the cache entries have at least a faulty cell. Then, we analyze how the intrinsic noise tolerance of emerging applications can be exploited to design an approximate Instruction Set Architecture (ISA). Exploiting the ISA redundancy, we explore a set of techniques to approximate the execution of instructions across a set of emerging applications, pointing out the potential of reducing the complexity of the ISA, and the trade-offs of the approach. In a proof-of-concept implementation, the ISA is shrunk in two dimensions: Breadth (i.e., simplifying instructions) and Depth (i.e., dropping instructions). This proof-of-concept shows that energy can be reduced on average 20.6% at around 14.9% accuracy loss

A fault-tolerant last level cache for CMPs operating at ultra-low voltage

Voltage scaling to values near the threshold voltage is a promising technique to hold off the many-core power wall. However, as voltage decreases, some SRAM cells are unable to operate reliably and show a behavior consistent with a hard fault. Block disabling is a micro-architectural technique that allows low-voltage operation by deactivating faulty cache entries, at the expense of reducing the effective cache capacity. In the case of the last-level cache, this capacity reduction leads to an increase in off-chip memory accesses, diminishing the overall energy benefit of reducing the voltage supply. In this work, we exploit the reuse locality and the intrinsic redundancy of multi-level inclusive hierarchies to enhance the performance of block disabling with negligible cost. The proposed fault-aware last-level cache management policy maps critical blocks, those not present in private caches and with a higher probability of being reused, to active cache entries. Our evaluation shows that this fault-aware management results in up to 37.3% and 54.2% fewer misses per kilo instruction (MPKI) than block disabling for multiprogrammed and parallel workloads, respectively. This translates to performance enhancements of up to 13% and 34.6% for multiprogrammed and parallel workloads, respectively.Peer ReviewedPostprint (author's final draft

Doctor of Philosophy

dissertationIn recent years, a number of trends have started to emerge, both in microprocessor and application characteristics. As per Moore's law, the number of cores on chip will keep doubling every 18-24 months. International Technology Roadmap for Semiconductors (ITRS) reports that wires will continue to scale poorly, exacerbating the cost of on-chip communication. Cores will have to navigate an on-chip network to access data that may be scattered across many cache banks. The number of pins on the package, and hence available off-chip bandwidth, will at best increase at sublinear rate and at worst, stagnate. A number of disruptive memory technologies, e.g., phase change memory (PCM) have begun to emerge and will be integrated into the memory hierarchy sooner than later, leading to non-uniform memory access (NUMA) hierarchies. This will make the cost of accessing main memory even higher. In previous years, most of the focus has been on deciding the memory hierarchy level where data must be placed (L1 or L2 caches, main memory, disk, etc.). However, in modern and future generations, each level is getting bigger and its design is being subjected to a number of constraints (wire delays, power budget, etc.). It is becoming very important to make an intelligent decision about where data must be placed within a level. For example, in a large non-uniform access cache (NUCA), we must figure out the optimal bank. Similarly, in a multi-dual inline memory module (DIMM) non uniform memory access (NUMA) main memory, we must figure out the DIMM that is the optimal home for every data page. Studies have indicated that heterogeneous main memory hierarchies that incorporate multiple memory technologies are on the horizon. We must develop solutions for data management that take heterogeneity into account. For these memory organizations, we must again identify the appropriate home for data. In this dissertation, we attempt to verify the following thesis statement: "Can low-complexity hardware and OS mechanisms manage data placement within each memory hierarchy level to optimize metrics such as performance and/or throughput?" In this dissertation we argue for a hardware-software codesign approach to tackle the above mentioned problems at different levels of the memory hierarchy. The proposed methods utilize techniques like page coloring and shadow addresses and are able to handle a large number of problems ranging from managing wire-delays in large, shared NUCA caches to distributing shared capacity among different cores. We then examine data-placement issues in NUMA main memory for a many-core processor with a moderate number of on-chip memory controllers. Using codesign approaches, we achieve efficient data placement by modifying the operating system's (OS) page allocation algorithm for a wide variety of main memory architectures

Near Data Processing for Efficient and Trusted Systems

We live in a world which constantly produces data at a rate which only increases with time. Conventional processor architectures fail to process this abundant data in an efficient manner as they expend significant energy in instruction processing and moving data over deep memory hierarchies. Furthermore, to process large amounts of data in a cost effective manner, there is increased demand for remote computation. While cloud service providers have come up with innovative solutions to cater to this increased demand, the security concerns users feel for their data remains a strong impediment to their wide scale adoption. An exciting technique in our repertoire to deal with these challenges is near-data processing. Near-data processing (NDP) is a data-centric paradigm which moves computation to where data resides. This dissertation exploits NDP to both process the data deluge we face efficiently and design low-overhead secure hardware designs. To this end, we first propose Compute Caches, a novel NDP technique. Simple augmentations to underlying SRAM design enable caches to perform commonly used operations. In-place computation in caches not only avoids excessive data movement over memory hierarchy, but also significantly reduces instruction processing energy as independent sub-units inside caches perform computation in parallel. Compute Caches significantly improve the performance and reduce energy expended for a suite of data intensive applications. Second, this dissertation identifies security advantages of NDP. While memory bus side channel has received much attention, a low-overhead hardware design which defends against it remains elusive. We observe that smart memory, memory with compute capability, can dramatically simplify this problem. To exploit this observation, we propose InvisiMem which uses the logic layer in the smart memory to implement cryptographic primitives, which aid in addressing memory bus side channel efficiently. Our solutions obviate the need for expensive constructs like Oblivious RAM (ORAM) and Merkle trees, and have one to two orders of magnitude lower overheads for performance, space, energy, and memory bandwidth, compared to prior solutions. This dissertation also addresses a related vulnerability of page fault side channel in which the Operating System (OS) induces page faults to learn application's address trace and deduces application secrets from it. To tackle it, we propose Sanctuary which obfuscates page fault channel while allowing the OS to manage memory as a resource. To do so, we design a novel construct, Oblivious Page Management (OPAM) which is derived from ORAM but is customized for page management context. We employ near-memory page moves to reduce OPAM overhead and also propose a novel memory partition to reduce OPAM transactions required. For a suite of cloud applications which process sensitive data we show that page fault channel can be tackled at reasonable overheads.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/144139/1/shaizeen_1.pd