Responsive multipath TCP in SDN-based datacenters

Conference Theme: Smart City & Smart WorldA basic need in datacenter networks is to provide high throughput for large flows such as the massive shuffle traffic flows in a MapReduce application. Multipath TCP (MPTCP) has been investigated as an effective approach toward this goal, by spreading one TCP flow onto multiple paths. However, the current MPTCP implementation has two major limitations: (1) a fixed number of subflows are used without reacting to the actual traffic condition; (2) the routing of subflows of a multipath TCP connection relies heavily on the ECMP-based random hashing. The former may lead to a waste of both the server and network resources, while the latter can cause throughput degradation when multiple subflows collide on the same path. This paper proposes a responsive MPTCP system to resolve the two limitations simultaneously. Our system employs a centralized controller for intelligent subflow route calculation and a monitor running on each server for actively adjusting the number of subflows. Working in synergy, the two modules enable MPTCP flows to respond to the traffic conditions and pursue high throughput on the fly, at very low computation and messaging overhead. NS3-based experiments show that our system achieves satisfactory throughput with less resource overhead, or better throughput at similar amounts of overhead, as compared to common alternatives.published_or_final_versio

A Novel QoE-Centric SDN-Based Multipath Routing Approach for Multimedia Services over 5G Networks

© 2018 IEEE. The explosion of enhanced applications such as live video streaming, video gaming and Virtual Reality calls for efforts to optimize transport protocols to manage the increasing amount of data traffic on future 5G networks. Through bandwidth aggregation over multiple paths, the Multi-Path Transmission Control Protocol (MPTCP) can enhance the performance of network applications. MPTCP can split a large multimedia flow into subflows and apply a congestion control mechanism on each subflow. Segment Routing (SR), a promising source routing approach, has emerged to provide advanced packet forwarding over 5G networks. In this paper, we explore the utilization of MPTCP and SR in SDN-based networks to improve network resources utilization and end- user's QoE for delivering multimedia services over 5G networks. We propose a novel QoE-aware, SDN- based MPTCP/SR approach for service delivery. In order to demonstrate the feasibility of our approach, we implemented an intelligent QoE- centric Multipath Routing Algorithm (QoMRA) on an SDN source routing platform using Mininet and POX controller. We carried out experiments on Dynamic Adaptive video Steaming over HTTP (DASH) applications over various network conditions. The preliminary results show that, our QoE-aware SDN- based MPTCP/SR scheme performs better compared to the conventional TCP approach in terms of throughput, link utilization and the end-user's QoE

A survey on mobility-induced service migration in the fog, edge, and related computing paradigms

The final publication is available at ACM via http://dx.doi.org/10.1145/3326540With the advent of fog and edge computing paradigms, computation capabilities have been moved toward the edge of the network to support the requirements of highly demanding services. To ensure that the quality of such services is still met in the event of users’ mobility, migrating services across different computing nodes becomes essential. Several studies have emerged recently to address service migration in different edge-centric research areas, including fog computing, multi-access edge computing (MEC), cloudlets, and vehicular clouds. Since existing surveys in this area focus on either VM migration in general or migration in a single research field (e.g., MEC), the objective of this survey is to bring together studies from different, yet related, edge-centric research fields while capturing the different facets they addressed. More specifically, we examine the diversity characterizing the landscape of migration scenarios at the edge, present an objective-driven taxonomy of the literature, and highlight contributions that rather focused on architectural design and implementation. Finally, we identify a list of gaps and research opportunities based on the observation of the current state of the literature. One such opportunity lies in joining efforts from both networking and computing research communities to facilitate future research in this area.Peer ReviewedPreprin

QoE-Centric Control and Management of Multimedia Services in Software Defined and Virtualized Networks

Multimedia services consumption has increased tremendously since the deployment of 4G/LTE networks. Mobile video services (e.g., YouTube and Mobile TV) on smart devices are expected to continue to grow with the emergence and evolution of future networks such as 5G. The end user’s demand for services with better quality from service providers has triggered a trend towards Quality of Experience (QoE) - centric network management through efficient utilization of network resources. However, existing network technologies are either unable to adapt to diverse changing network conditions or limited in available resources. This has posed challenges to service providers for provisioning of QoE-centric multimedia services. New networking solutions such as Software Defined Networking (SDN) and Network Function Virtualization (NFV) can provide better solutions in terms of QoE control and management of multimedia services in emerging and future networks. The features of SDN, such as adaptability, programmability and cost-effectiveness make it suitable for bandwidth-intensive multimedia applications such as live video streaming, 3D/HD video and video gaming. However, the delivery of multimedia services over SDN/NFV networks to achieve optimized QoE, and the overall QoE-centric network resource management remain an open question especially in the advent development of future softwarized networks. The work in this thesis intends to investigate, design and develop novel approaches for QoE-centric control and management of multimedia services (with a focus on video streaming services) over software defined and virtualized networks. First, a video quality management scheme based on the traffic intensity under Dynamic Adaptive Video Streaming over HTTP (DASH) using SDN is developed. The proposed scheme can mitigate virtual port queue congestion which may cause buffering or stalling events during video streaming, thus, reducing the video quality. A QoE-driven resource allocation mechanism is designed and developed for improving the end user’s QoE for video streaming services. The aim of this approach is to find the best combination of network node functions that can provide an optimized QoE level to end-users through network node cooperation. Furthermore, a novel QoE-centric management scheme is proposed and developed, which utilizes Multipath TCP (MPTCP) and Segment Routing (SR) to enhance QoE for video streaming services over SDN/NFV-based networks. The goal of this strategy is to enable service providers to route network traffic through multiple disjointed bandwidth-satisfying paths and meet specific service QoE guarantees to the end-users. Extensive experiments demonstrated that the proposed schemes in this work improve the video quality significantly compared with the state-of-the- art approaches. The thesis further proposes the path protections and link failure-free MPTCP/SR-based architecture that increases survivability, resilience, availability and robustness of future networks. The proposed path protection and dynamic link recovery scheme achieves a minimum time to recover from a failed link and avoids link congestion in softwarized networks

SDN-BASED MECHANISMS FOR PROVISIONING QUALITY OF SERVICE TO SELECTED NETWORK FLOWS

Despite the huge success and adoption of computer networks in the recent decades, traditional network architecture falls short of some requirements by many applications. One particular shortcoming is the lack of convenient methods for providing quality of service (QoS) guarantee to various network applications. In this dissertation, we explore new Software-Defined Networking (SDN) mechanisms to provision QoS to targeted network flows. Our study contributes to providing QoS support to applications in three aspects. First, we explore using alternative routing paths for selected flows that have QoS requirements. Instead of using the default shortest path used by the current network routing protocols, we investigate using the SDN controller to install forwarding rules in switches that can achieve higher bandwidth. Second, we develop new mechanisms for guaranteeing the latency requirement by those applications depending on timely delivery of sensor data and control signals. The new mechanism pre-allocates higher priority queues in routers/switches and reserves these queues for control/sensor traffic. Third, we explore how to make the applications take advantage of the opportunity provided by SDN. In particular, we study new transmission mechanisms for big data transfer in the cloud computing environment. Instead of using a single TCP path to transfer data, we investigate how to let the application set up multiple TCP paths for the same application to achieve higher throughput. We evaluate these new mechanisms with experiments and compare them with existing approaches

MP-CFM: MPTCP-Based communication functional module for next generation ERTMS

184 p. El contenido de los capítulos 4,5,6,7,8 y 9 está sujeto a confidencialidadEl Sistema Europeo de Gestión del Tráfico Ferroviario (ERTMS, por sus siglasen inglés), fue originalmente diseñado para los ferrocarriles europeos. Sinembargo, a lo largo de las dos últimas décadas, este sistema se ha convertidoen el estándar de-facto para los servicios de Alta Velocidad en la mayoría depaíses desarrollados.El sistema ERTMS se compone de tres subsistemas principales: 1) el Sistemade Control Ferroviario Europeo (ETCS, por sus siglas en inglés), que actúacomo aplicación de señalización; 2) el sistema Euroradio, que a su vez estádividido en dos subsistemas, el Módulo de Seguridad Funcional (SFM, porsus siglas en inglés), y el Módulo de Comunicación Funcional (CFM, porsus siglas en inglés); y 3) el sistema de comunicaciones subyacente, GSM-R,que transporta la información intercambiada entre el sistema embarcado enel tren (OBU, por sus siglas en inglés) y el Centro de Bloqueo por Radio(RBC, por sus siglas en inglés). El sistema de señalización ETCS soporta tresniveles dependiendo del nivel de prestaciones soportadas. En el nivel 3 seintroduce la posibilidad de trabajar con bloques móviles en lugar de bloquesfijos definidos en la vía. Esto implica que la distancia de avance entre dos trenesconsecutivos puede ser reducida a una distancia mínima en la que se garanticela seguridad del servicio, aumentando por tanto la capacidad del corredorferroviario. Esta distancia de seguridad viene determinada por la combinaciónde la distancia de frenado del tren y el retraso de las comunicaciones deseñalización. Por lo tanto, se puede afirmar que existe una relación directaentre los retrasos y la confiabilidad de las transmisiones de las aplicaciones deseñalización y la capacidad operacional de un corredor ferroviario. Así pues,el estudio y mejora de los sistemas de comunicaciones utilizados en ERTMSjuegan un papel clave en la evolución del sistema ERTMS. Asimismo, unaoperatividad segura en ERTMS, desde el punto de vista de las comunicacionesimplicadas en la misma, viene determinada por la confiabilidad de lascomunicaciones, la disponibilidad de sus canales de comunicación, el retrasode las comunicaciones y la seguridad de sus mensajes.Unido este hecho, la industria ferroviaria ha venido trabajando en ladigitalización y la transición al protocolo IP de la mayor parte de los sistemasde señalización. Alineado con esta tendencia, el consorcio industrial UNISIGha publicado recientemente un nuevo modelo de comunicaciones para ERTMSque incluye la posibilidad, no solo de operar con el sistema tradicional,basado en tecnología de conmutación de circuitos, sino también con un nuevosistema basado en IP. Esta tesis está alineada con el contexto de migraciónactual y pretende contribuir a mejorar la disponibilidad, confiabilidad yseguridad de las comunicaciones, tomando como eje fundamental los tiemposde transmisión de los mensajes, con el horizonte puesto en la definición deuna próxima generación de ERTMS, definida en esta tesis como NGERTMS.En este contexto, se han detectado tres retos principales para reforzar laresiliencia de la arquitectura de comunicaciones del NGERTMS: 1) mejorarla supervivencia de las comunicaciones ante disrupciones; 2) superar laslimitaciones actuales de ERTMS para enviar mensajes de alta prioridad sobretecnología de conmutación de paquetes, dotando a estos mensajes de un mayorgrado de resiliencia y menor latencia respecto a los mensajes ordinarios; y3) el aumento de la seguridad de las comunicaciones y el incremento de ladisponibilidad sin que esto conlleve un incremento en la latencia.Considerando los desafíos previamente descritos, en esta tesis se proponeuna arquitectura de comunicaciones basada en el protocolo MPTCP, llamadaMP-CFM, que permite superar dichos desafíos, a la par que mantener laretrocompatibilidad con el sistema de comunicaciones basado en conmutaciónde paquetes recientemente propuesto por UNISIG. Hasta el momento, esta esla primera vez que se propone una arquitectura de comunicaciones completacapaz de abordar los desafíos mencionados anteriormente. Esta arquitecturaimplementa cuatro tipos de clase de servicio, los cuales son utilizados porlos paquetes ordinarios y de alta prioridad para dos escenarios distintos; unescenario en el que ambos extremos, el sistema embarcado o OBU y el RBC,disponen de múltiples interfaces de red; y otro escenario transicional en el cualel RBC sí tiene múltiples interfaces de red pero el OBU solo dispone de unaúnica interfaz. La arquitectura de comunicaciones propuesta para el entornoferroviario ha sido validada mediante un entorno de simulación desarrolladopara tal efecto. Es más, dichas simulaciones demuestran que la arquitecturapropuesta, ante disrupciones de canal, supera con creces en términos derobustez el sistema diseñado por UNISIG. Como conclusión, se puede afirmarque en esta tesis se demuestra que una arquitectura de comunicaciones basadade MPTCP cumple con los exigentes requisitos establecidos para el NGERTMSy por tanto dicha propuesta supone un avance en la evolución del sistema deseñalización ferroviario europeo

FatPaths: Routing in Supercomputers and Data Centers when Shortest Paths Fall Short

We introduce FatPaths: a simple, generic, and robust routing architecture that enables state-of-the-art low-diameter topologies such as Slim Fly to achieve unprecedented performance. FatPaths targets Ethernet stacks in both HPC supercomputers as well as cloud data centers and clusters. FatPaths exposes and exploits the rich ("fat") diversity of both minimal and non-minimal paths for high-performance multi-pathing. Moreover, FatPaths uses a redesigned "purified" transport layer that removes virtually all TCP performance issues (e.g., the slow start), and incorporates flowlet switching, a technique used to prevent packet reordering in TCP networks, to enable very simple and effective load balancing. Our design enables recent low-diameter topologies to outperform powerful Clos designs, achieving 15% higher net throughput at 2x lower latency for comparable cost. FatPaths will significantly accelerate Ethernet clusters that form more than 50% of the Top500 list and it may become a standard routing scheme for modern topologies