Advances in Reachability Analysis for Nonlinear Dynamic Systems

Systems of nonlinear ordinary differential equations (ODEs) are used to model an incredible variety of dynamic phenomena in chemical, oil and gas, and pharmaceutical industries. In reality, such models are nearly always subject to significant uncertainties in their initial conditions, parameters, and inputs. This dissertation provides new theoretical and numerical techniques for rigorously enclosing the set of solutions reachable by a given systems of nonlinear ODEs subject to uncertain initial conditions, parameters, and time-varying inputs. Such sets are often referred to as reachable sets, and methods for enclosing them are critical for designing systems that are passively robust to uncertainty, as well as for optimal real-time decision-making. Such enclosure methods are used extensively for uncertainty propagation, robust control, system verification, and optimization of dynamic systems arising in a wide variety of applications. Unfortunately, existing methods for computing such enclosures often provide an unworkable compromise between cost and accuracy. For example, interval methods based on differential inequalities (DI) can produce bounds very efficiently but are often too conservative to be of any practical use. In contrast, methods based on more complex sets can achieve sharp bounds, but are far too expensive for real-time decision-making and scale poorly with problem size. Recently, it has been shown that bounds computed via differential inequalities can often be made much less conservative while maintaining high efficiency by exploiting redundant model equations that are known to hold for all trajectories of interest (e.g., linear relationships among chemical species in a reaction network that hold due to the conservation of mass or elements). These linear relationships are implied by the governing ODEs, and can thus be considered redundant. However, these advances are only applicable to a limited class of system in which pre-existing linear redundant model equations are available. Moreover, the theoretical results underlying these algorithms do not apply to redundant equations that depend on time-varying inputs and rely on assumptions that prove to be very restrictive for nonlinear redundant equations, etc. This dissertation continues a line of research that has recently achieved very promising bounding results using methods based on differential inequalities. In brief, the major contributions can be divided into three categories: (1) In regard to algorithms, this dissertation significantly improves existing algorithms that exploit linear redundant model equations to achieve more accurate and efficient enclosures. It also develops new fast and accurate bounding algorithms that can exploit nonlinear redundant model equations. (2) Considering theoretical contributions, it develops a novel theoretical framework for the introduction of redundant model equations into arbitrary dynamic models to effectively reduce conservatism. The newly developed theories have more generality in terms of application. For example, complex nonlinear constraints that involve states, time derivatives of the system states, and time- varying inputs are allowed to be exploited. (3) A new differential inequalities method called Mean Value Differential Inequalities (MVDI) is developed that can automatically introduce redundant model equations for arbitrary dynamic systems and has a second-order convergence rate reported the first time among DI-based methods

Set-based state estimation and fault diagnosis using constrained zonotopes and applications

This doctoral thesis develops new methods for set-based state estimation and active fault diagnosis (AFD) of (i) nonlinear discrete-time systems, (ii) discrete-time nonlinear systems whose trajectories satisfy nonlinear equality constraints (called invariants), (iii) linear descriptor systems, and (iv) joint state and parameter estimation of nonlinear descriptor systems. Set-based estimation aims to compute tight enclosures of the possible system states in each time step subject to unknown-but-bounded uncertainties. To address this issue, the present doctoral thesis proposes new methods for efficiently propagating constrained zonotopes (CZs) through nonlinear mappings. Besides, this thesis improves the standard prediction-update framework for systems with invariants using new algorithms for refining CZs based on nonlinear constraints. In addition, this thesis introduces a new approach for set-based AFD of a class of nonlinear discrete-time systems. An affine parametrization of the reachable sets is obtained for the design of an optimal input for set-based AFD. In addition, this thesis presents new methods based on CZs for set-valued state estimation and AFD of linear descriptor systems. Linear static constraints on the state variables can be directly incorporated into CZs. Moreover, this thesis proposes a new representation for unbounded sets based on zonotopes, which allows to develop methods for state estimation and AFD also of unstable linear descriptor systems, without the knowledge of an enclosure of all the trajectories of the system. This thesis also develops a new method for set-based joint state and parameter estimation of nonlinear descriptor systems using CZs in a unified framework. Lastly, this manuscript applies the proposed set-based state estimation and AFD methods using CZs to unmanned aerial vehicles, water distribution networks, and a lithium-ion cell.Comment: My PhD Thesis from Federal University of Minas Gerais, Brazil. Most of the research work has already been published in DOIs 10.1109/CDC.2018.8618678, 10.23919/ECC.2018.8550353, 10.1016/j.automatica.2019.108614, 10.1016/j.ifacol.2020.12.2484, 10.1016/j.ifacol.2021.08.308, 10.1016/j.automatica.2021.109638, 10.1109/TCST.2021.3130534, 10.1016/j.automatica.2022.11042

Computer Aided Verification

This open access two-volume set LNCS 13371 and 13372 constitutes the refereed proceedings of the 34rd International Conference on Computer Aided Verification, CAV 2022, which was held in Haifa, Israel, in August 2022. The 40 full papers presented together with 9 tool papers and 2 case studies were carefully reviewed and selected from 209 submissions. The papers were organized in the following topical sections: Part I: Invited papers; formal methods for probabilistic programs; formal methods for neural networks; software Verification and model checking; hyperproperties and security; formal methods for hardware, cyber-physical, and hybrid systems. Part II: Probabilistic techniques; automata and logic; deductive verification and decision procedures; machine learning; synthesis and concurrency. This is an open access book

Computer Aided Verification

This open access two-volume set LNCS 11561 and 11562 constitutes the refereed proceedings of the 31st International Conference on Computer Aided Verification, CAV 2019, held in New York City, USA, in July 2019. The 52 full papers presented together with 13 tool papers and 2 case studies, were carefully reviewed and selected from 258 submissions. The papers were organized in the following topical sections: Part I: automata and timed systems; security and hyperproperties; synthesis; model checking; cyber-physical systems and machine learning; probabilistic systems, runtime techniques; dynamical, hybrid, and reactive systems; Part II: logics, decision procedures; and solvers; numerical programs; verification; distributed systems and networks; verification and invariants; and concurrency

Computer Aided Verification

This open access two-volume set LNCS 11561 and 11562 constitutes the refereed proceedings of the 31st International Conference on Computer Aided Verification, CAV 2019, held in New York City, USA, in July 2019. The 52 full papers presented together with 13 tool papers and 2 case studies, were carefully reviewed and selected from 258 submissions. The papers were organized in the following topical sections: Part I: automata and timed systems; security and hyperproperties; synthesis; model checking; cyber-physical systems and machine learning; probabilistic systems, runtime techniques; dynamical, hybrid, and reactive systems; Part II: logics, decision procedures; and solvers; numerical programs; verification; distributed systems and networks; verification and invariants; and concurrency

Computer Aided Verification

This open access two-volume set LNCS 10980 and 10981 constitutes the refereed proceedings of the 30th International Conference on Computer Aided Verification, CAV 2018, held in Oxford, UK, in July 2018. The 52 full and 13 tool papers presented together with 3 invited papers and 2 tutorials were carefully reviewed and selected from 215 submissions. The papers cover a wide range of topics and techniques, from algorithmic and logical foundations of verification to practical applications in distributed, networked, cyber-physical, and autonomous systems. They are organized in topical sections on model checking, program analysis using polyhedra, synthesis, learning, runtime verification, hybrid and timed systems, tools, probabilistic systems, static analysis, theory and security, SAT, SMT and decisions procedures, concurrency, and CPS, hardware, industrial applications

Computer Aided Verification

This open access two-volume set LNCS 10980 and 10981 constitutes the refereed proceedings of the 30th International Conference on Computer Aided Verification, CAV 2018, held in Oxford, UK, in July 2018. The 52 full and 13 tool papers presented together with 3 invited papers and 2 tutorials were carefully reviewed and selected from 215 submissions. The papers cover a wide range of topics and techniques, from algorithmic and logical foundations of verification to practical applications in distributed, networked, cyber-physical, and autonomous systems. They are organized in topical sections on model checking, program analysis using polyhedra, synthesis, learning, runtime verification, hybrid and timed systems, tools, probabilistic systems, static analysis, theory and security, SAT, SMT and decisions procedures, concurrency, and CPS, hardware, industrial applications

Computer Aided Verification

This open access two-volume set LNCS 10980 and 10981 constitutes the refereed proceedings of the 30th International Conference on Computer Aided Verification, CAV 2018, held in Oxford, UK, in July 2018. The 52 full and 13 tool papers presented together with 3 invited papers and 2 tutorials were carefully reviewed and selected from 215 submissions. The papers cover a wide range of topics and techniques, from algorithmic and logical foundations of verification to practical applications in distributed, networked, cyber-physical, and autonomous systems. They are organized in topical sections on model checking, program analysis using polyhedra, synthesis, learning, runtime verification, hybrid and timed systems, tools, probabilistic systems, static analysis, theory and security, SAT, SMT and decisions procedures, concurrency, and CPS, hardware, industrial applications