Efficient Neuromorphic Computing Enabled by Spin-Transfer Torque: Devices, Circuits and Systems

Present day computers expend orders of magnitude more computational resources to perform various cognitive and perception related tasks that humans routinely perform everyday. This has recently resulted in a seismic shift in the field of computation where research efforts are being directed to develop a neurocomputer that attempts to mimic the human brain by nanoelectronic components and thereby harness its efficiency in recognition problems. Bridging the gap between neuroscience and nanoelectronics, this thesis demonstrates the encoding of biological neural and synaptic functionalities in the underlying physics of electron spin. Description of various spin-transfer torque mechanisms that can be potentially utilized for realizing neuro-mimetic device structures is provided. A cross-layer perspective extending from the device to the circuit and system level is presented to envision the design of an All-Spin neuromorphic processor enabled with on-chip learning functionalities. Device-circuit-algorithm co-simulation framework calibrated to experimental results suggest that such All-Spin neuromorphic systems can potentially achieve almost two orders of magnitude energy improvement in comparison to state-of-the-art CMOS implementations

근사 컴퓨팅을 이용한 회로 노화 보상과 에너지 효율적인 신경망 구현

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 이혁재.Approximate computing reduces the cost (energy and/or latency) of computations by relaxing the correctness (i.e., precision) of computations up to the level, which is dependent on types of applications. Moreover, it can be realized in various hierarchies of computing system design from circuit level to application level. This dissertation presents the methodologies applying approximate computing across such hierarchies; compensating aging-induced delay in logic circuit by dynamic computation approximation (Chapter 1), designing energy-efficient neural network by combining low-power and low-latency approximate neuron models (Chapter 2), and co-designing in-memory gradient descent module with neural processing unit so as to address a memory bottleneck incurred by memory I/O for high-precision data (Chapter 3). The first chapter of this dissertation presents a novel design methodology to turn the timing violation caused by aging into computation approximation error without the reliability guardband or increasing the supply voltage. It can be realized by accurately monitoring the critical path delay at run-time. The proposal is evaluated at two levels: RTL component level and system level. The experimental results at the RTL component level show a significant improvement in terms of (normalized) mean squared error caused by the timing violation and, at the system level, show that the proposed approach successfully transforms the aging-induced timing violation errors into much less harmful computation approximation errors, therefore it recovers image quality up to perceptually acceptable levels. It reduces the dynamic and static power consumption by 21.45% and 10.78%, respectively, with 0.8% area overhead compared to the conventional approach. The second chapter of this dissertation presents an energy-efficient neural network consisting of alternative neuron models; Stochastic-Computing (SC) and Spiking (SP) neuron models. SC has been adopted in various fields to improve the power efficiency of systems by performing arithmetic computations stochastically, which approximates binary computation in conventional computing systems. Moreover, a recent work showed that deep neural network (DNN) can be implemented in the manner of stochastic computing and it greatly reduces power consumption. However, Stochastic DNN (SC-DNN) suffers from problem of high latency as it processes only a bit per cycle. To address such problem, it is proposed to adopt Spiking DNN (SP-DNN) as an input interface for SC-DNN since SP effectively processes more bits per cycle than SC-DNN. Moreover, this chapter resolves the encoding mismatch problem, between two different neuron models, without hardware cost by compensating the encoding mismatch with synapse weight calibration. A resultant hybrid DNN (SPSC-DNN) consists of SP-DNN as bottom layers and SC-DNN as top layers. Exploiting the reduced latency from SP-DNN and low-power consumption from SC-DNN, the proposed SPSC-DNN achieves improved energy-efficiency with lower error-rate compared to SC-DNN and SP-DNN in same network configuration. The third chapter of this dissertation proposes GradPim architecture, which accelerates the parameter updates by in-memory processing which is codesigned with 8-bit floating-point training in Neural Processing Unit (NPU) for deep neural networks. By keeping the high precision processing algorithms in memory, such as the parameter update incorporating high-precision weights in its computation, the GradPim architecture can achieve high computational efficiency using 8-bit floating point in NPU and also gain power efficiency by eliminating massive high-precision data transfers between NPU and off-chip memory. A simple extension of DDR4 SDRAM utilizing bank-group parallelism makes the operation designs in processing-in-memory (PIM) module efficient in terms of hardware cost and performance. The experimental results show that the proposed architecture can improve the performance of the parameter update phase in the training by up to 40% and greatly reduce the memory bandwidth requirement while posing only a minimal amount of overhead to the protocol and the DRAM area.근사 컴퓨팅은 연산의 정확도의 손실을 어플리케이션 별 적절한 수준까지 허용함으로써 연산에 필요한 비용 (에너지나 지연시간)을 줄인다. 게다가, 근사 컴퓨팅은 컴퓨팅 시스템 설계의 회로 계층부터 어플리케이션 계층까지 다양한 계층에 적용될 수 있다. 본 논문에서는 근사 컴퓨팅 방법론을 다양한 시스템 설계의 계층에 적용하여 전력과 에너지 측면에서 이득을 얻을 수 있는 방법들을 제안하였다. 이는, 연산 근사화 (computation Approximation)를 통해 회로의 노화로 인해 증가된 지연시간을 추가적인 전력소모 없이 보상하는 방법과 (챕터 1), 근사 뉴런모델 (approximate neuron model)을 이용해 에너지 효율이 높은 신경망을 구성하는 방법 (챕터 2), 그리고 메모리 대역폭으로 인한 병목현상 문제를 높은 정확도 데이터를 활용한 연산을 메모리 내에서 수행함으로써 완화시키는 방법을 (챕터3) 제안하였다. 첫 번째 챕터는 회로의 노화로 인한 지연시간위반을 (timing violation) 설계마진이나 (reliability guardband) 공급전력의 증가 없이 연산오차 (computation approximation error)를 통해 보상하는 설계방법론 (design methodology)를 제안하였다. 이를 위해 주요경로의 (critical path) 지연시간을 동작시간에 정확하게 측정할 필요가 있다. 여기서 제안하는 방법론은 RTL component와 system 단계에서 평가되었다. RTL component 단계의 실험결과를 통해 제안한 방식이 표준화된 평균제곱오차를 (normalized mean squared error) 상당히 줄였음을 볼 수 있다. 그리고 system 단계에서는 이미지처리 시스템에서 이미지의 품질이 인지적으로 충분히 회복되는 것을 보임으로써 회로노화로 인해 발생한 지연시간위반 오차가 에러의 크기가 작은 연산오차로 변경되는 것을 확인 할 수 있었다. 결론적으로, 제안된 방법론을 따랐을 때 0.8%의 공간을 (area) 더 사용하는 비용을 지불하고 21.45%의 동적전력소모와 (dynamic power consumption) 10.78%의 정적전력소모의 (static power consumption) 감소를 달성할 수 있었다. 두 번째 챕터는 근사 뉴런모델을 활용하는 고-에너지효율의 신경망을 (neural network) 제안하였다. 본 논문에서 사용한 두 가지의 근사 뉴런모델은 확률컴퓨팅과 (stochastic computing) 스파이킹뉴런 (spiking neuron) 이론들을 기반으로 모델링되었다. 확률컴퓨팅은 산술연산들을 확률적으로 수행함으로써 이진연산을 낮은 전력소모로 수행한다. 최근에 확률컴퓨팅 뉴런모델을 이용하여 심층 신경망 (deep neural network)를 구현할 수 있다는 연구가 진행되었다. 그러나, 확률컴퓨팅을 뉴런모델링에 활용할 경우 심층신경망이 매 클락사이클마다 (clock cycle) 하나의 비트만을 (bit) 처리하므로, 지연시간 측면에서 매우 나쁠 수 밖에 없는 문제가 있다. 따라서 본 논문에서는 이러한 문제를 해결하기 위하여 스파이킹 뉴런모델로 구성된 스파이킹 심층신경망을 확률컴퓨팅을 활용한 심층신경망 구조와 결합하였다. 스파이킹 뉴런모델의 경우 매 클락사이클마다 여러 비트를 처리할 수 있으므로 심층신경망의 입력 인터페이스로 사용될 경우 지연시간을 줄일 수 있다. 하지만, 확률컴퓨팅 뉴런모델과 스파이킹 뉴런모델의 경우 부호화 (encoding) 방식이 다른 문제가 있다. 따라서 본 논문에서는 해당 부호화 불일치 문제를 모델의 파라미터를 학습할 때 고려함으로써, 파라미터들의 값이 부호화 불일치를 고려하여 조절 (calibration) 될 수 있도록 하여 문제를 해결하였다. 이러한 분석의 결과로, 앞 쪽에는 스파이킹 심층신경망을 배치하고 뒷 쪽애는 확률컴퓨팅 심층신경망을 배치하는 혼성신경망을 제안하였다. 혼성신경망은 스파이킹 심층신경망을 통해 매 클락사이클마다 처리되는 비트 양의 증가로 인한 지연시간 감소 효과와 확률컴퓨팅 심층신경망의 저전력 소모 특성을 모두 활용함으로써 각 심층신경망을 따로 사용하는 경우 대비 우수한 에너지 효율성을 비슷하거나 더 나은 정확도 결과를 내면서 달성한다. 세 번째 챕터는 심층신경망을 8비트 부동소숫점 연산으로 학습하는 신경망처리유닛의 (neural processing unit) 파라미터 갱신을 (parameter update) 메모리-내-연산으로 (in-memory processing) 가속하는 GradPIM 아키텍쳐를 제안하였다. GradPIM은 8비트의 낮은 정확도 연산은 신경망처리유닛에 남기고, 높은 정확도를 가지는 데이터를 활용하는 연산은 (파라미터 갱신) 메모리 내부에 둠으로써 신경망처리유닛과 메모리간의 데이터통신의 양을 줄여, 높은 연산효율과 전력효율을 달성하였다. 또한, GradPIM은 bank-group 수준의 병렬화를 이루어 내 높은 내부 대역폭을 활용함으로써 메모리 대역폭을 크게 확장시킬 수 있게 되었다. 또한 이러한 메모리 구조의 변경이 최소화되었기 때문에 추가적인 하드웨어 비용도 최소화되었다. 실험 결과를 통해 GradPIM이 최소한의 DRAM 프로토콜 변화와 DRAM칩 내의 공간사용을 통해 심층신경망 학습과정 중 파라미터 갱신에 필요한 시간을 40%만큼 향상시켰음을 보였다.Chapter I: Dynamic Computation Approximation for Aging Compensation 1 1.1 Introduction 1 1.1.1 Chip Reliability 1 1.1.2 Reliability Guardband 2 1.1.3 Approximate Computing in Logic Circuits 2 1.1.4 Computation approximation for Aging Compensation 3 1.1.5 Motivational Case Study 4 1.2 Previous Work 5 1.2.1 Aging-induced Delay 5 1.2.2 Delay-Configurable Circuits 6 1.3 Proposed System 8 1.3.1 Overview of the Proposed System 8 1.3.2 Proposed Adder 9 1.3.3 Proposed Multiplier 11 1.3.4 Proposed Monitoring Circuit 16 1.3.5 Aging Compensation Scheme 19 1.4 Design Methodology 20 1.5 Evaluation 24 1.5.1 Experimental setup 24 1.5.2 RTL component level Adder/Multiplier 27 1.5.3 RTL component level Monitoring circuit 30 1.5.4 System level 31 1.6 Summary 38 Chapter II: Energy-Efficient Neural Network by Combining Approximate Neuron Models 40 2.1 Introduction 40 2.1.1 Deep Neural Network (DNN) 40 2.1.2 Low-power designs for DNN 41 2.1.3 Stochastic-Computing Deep Neural Network 41 2.1.4 Spiking Deep Neural Network 43 2.2 Hybrid of Stochastic and Spiking DNNs 44 2.2.1 Stochastic-Computing vs Spiking Deep Neural Network 44 2.2.2 Combining Spiking Layers and Stochastic Layers 46 2.2.3 Encoding Mismatch 47 2.3 Evaluation 49 2.3.1 Latency and Test Error 49 2.3.2 Energy Efficiency 51 2.4 Summary 54 Chapter III: GradPIM: In-memory Gradient Descent in Mixed-Precision DNN Training 55 3.1 Introduction 55 3.1.1 Neural Processing Unit 55 3.1.2 Mixed-precision Training 56 3.1.3 Mixed-precision Training with In-memory Gradient Descent 57 3.1.4 DNN Parameter Update Algorithms 59 3.1.5 Modern DRAM Architecture 61 3.1.6 Motivation 63 3.2 Previous Work 65 3.2.1 Processing-In-Memory 65 3.2.2 Co-design Neural Processing Unit and Processing-In-Memory 66 3.2.3 Low-precision Computation in NPU 67 3.3 GradPIM 68 3.3.1 GradPIM Architecture 68 3.3.2 GradPIM Operations 69 3.3.3 Timing Considerations 70 3.3.4 Update Phase Procedure 73 3.3.5 Commanding GradPIM 75 3.4 NPU Co-design with GradPIM 76 3.4.1 NPU Architecture 76 3.4.2 Data Placement 79 3.5 Evaluation 82 3.5.1 Evaluation Methodology 82 3.5.2 Experimental Results 83 3.5.3 Sensitivity Analysis 88 3.5.4 Layer Characterizations 90 3.5.5 Distributed Data Parallelism 90 3.6 Summary 92 3.6.1 Discussion 92 Bibliography 113 요약 114Docto

Energy-efficient embedded machine learning algorithms for smart sensing systems

Embedded autonomous electronic systems are required in numerous application domains such as Internet of Things (IoT), wearable devices, and biomedical systems. Embedded electronic systems usually host sensors, and each sensor hosts multiple input channels (e.g., tactile, vision), tightly coupled to the electronic computing unit (ECU). The ECU extracts information by often employing sophisticated methods, e.g., Machine Learning. However, embedding Machine Learning algorithms poses essential challenges in terms of hardware resources and energy consumption because of: 1) the high amount of data to be processed; 2) computationally demanding methods. Leveraging on the trade-off between quality requirements versus computational complexity and time latency could reduce the system complexity without affecting the performance. The objectives of the thesis are to develop: 1) energy-efficient arithmetic circuits outperforming state of the art solutions for embedded machine learning algorithms, 2) an energy-efficient embedded electronic system for the \u201celectronic-skin\u201d (e-skin) application. As such, this thesis exploits two main approaches: Approximate Computing: In recent years, the approximate computing paradigm became a significant major field of research since it is able to enhance the energy efficiency and performance of digital systems. \u201cApproximate Computing\u201d(AC) turned out to be a practical approach to trade accuracy for better power, latency, and size . AC targets error-resilient applications and offers promising benefits by conserving some resources. Usually, approximate results are acceptable for many applications, e.g., tactile data processing,image processing , and data mining ; thus, it is highly recommended to take advantage of energy reduction with minimal variation in performance . In our work, we developed two approximate multipliers: 1) the first one is called \u201cMETA\u201d multiplier and is based on the Error Tolerant Adder (ETA), 2) the second one is called \u201cApproximate Baugh-Wooley(BW)\u201d multiplier where the approximations are implemented in the generation of the partial products. We showed that the proposed approximate arithmetic circuits could achieve a relevant reduction in power consumption and time delay around 80.4% and 24%, respectively, with respect to the exact BW multiplier. Next, to prove the feasibility of AC in real world applications, we explored the approximate multipliers on a case study as the e-skin application. The e-skin application is defined as multiple sensing components, including 1) structural materials, 2) signal processing, 3) data acquisition, and 4) data processing. Particularly, processing the originated data from the e-skin into low or high-level information is the main problem to be addressed by the embedded electronic system. Many studies have shown that Machine Learning is a promising approach in processing tactile data when classifying input touch modalities. In our work, we proposed a methodology for evaluating the behavior of the system when introducing approximate arithmetic circuits in the main stages (i.e., signal and data processing stages) of the system. Based on the proposed methodology, we first implemented the approximate multipliers on the low-pass Finite Impulse Response (FIR) filter in the signal processing stage of the application. We noticed that the FIR filter based on (Approx-BW) outperforms state of the art solutions, while respecting the tradeoff between accuracy and power consumption, with an SNR degradation of 1.39dB. Second, we implemented approximate adders and multipliers respectively into the Coordinate Rotational Digital Computer (CORDIC) and the Singular Value Decomposition (SVD) circuits; since CORDIC and SVD take a significant part of the computationally expensive Machine Learning algorithms employed in tactile data processing. We showed benefits of up to 21% and 19% in power reduction at the cost of less than 5% accuracy loss for CORDIC and SVD circuits when scaling the number of approximated bits. 2) Parallel Computing Platforms (PCP): Exploiting parallel architectures for near-threshold computing based on multi-core clusters is a promising approach to improve the performance of smart sensing systems. In our work, we exploited a novel computing platform embedding a Parallel Ultra Low Power processor (PULP), called \u201cMr. Wolf,\u201d for the implementation of Machine Learning (ML) algorithms for touch modalities classification. First, we tested the ML algorithms at the software level; for RGB images as a case study and tactile dataset, we achieved accuracy respectively equal to 97% and 83.5%. After validating the effectiveness of the ML algorithm at the software level, we performed the on-board classification of two touch modalities, demonstrating the promising use of Mr. Wolf for smart sensing systems. Moreover, we proposed a memory management strategy for storing the needed amount of trained tensors (i.e., 50 trained tensors for each class) in the on-chip memory. We evaluated the execution cycles for Mr. Wolf using a single core, 2 cores, and 3 cores, taking advantage of the benefits of the parallelization. We presented a comparison with the popular low power ARM Cortex-M4F microcontroller employed, usually for battery-operated devices. We showed that the ML algorithm on the proposed platform runs 3.7 times faster than ARM Cortex M4F (STM32F40), consuming only 28 mW. The proposed platform achieves 15 7 better energy efficiency than the classification done on the STM32F40, consuming 81mJ per classification and 150 pJ per operation

Characterization and optimization of network traffic in cortical simulation

Considering the great variety of obstacles the Exascale systems have to face in the next future, a deeper attention will be given in this thesis to the interconnect and the power consumption. The data movement challenge involves the whole hierarchical organization of components in HPC systems — i.e. registers, cache, memory, disks. Running scientific applications needs to provide the most effective methods of data transport among the levels of hierarchy. On current petaflop systems, memory access at all the levels is the limiting factor in almost all applications. This drives the requirement for an interconnect achieving adequate rates of data transfer, or throughput, and reducing time delays, or latency, between the levels. Power consumption is identified as the largest hardware research challenge. The annual power cost to operate the system would be above 2.5 B$ per year for an Exascale system using current technology. The research for alternative power-efficient computing device is mandatory for the procurement of the future HPC systems. In this thesis, a preliminary approach will be offered to the critical process of co-design. Co-desing is defined as the simultaneos design of both hardware and software, to implement a desired function. This process both integrates all components of the Exascale initiative and illuminates the trade-offs that must be made within this complex undertaking

Low-Cost Deep Convolutional Neural Network Acceleration with Stochastic Computing and Quantization

Department of Computer Science and EngineeringFor about a decade, image classification performance leaded by deep convolutional neural networks (DCNNs) has achieved dramatic advancement. However, its excessive computational complexity requires much hardware cost and energy. Accelerators which consist of a many-core neural processing unit are appearing to compute DCNNs energy efficiently than conventional processors (e.g., CPUs and GPUs). However, a huge amount of general-purpose precision computations is still tough for mobile and edge devices. Therefore, there have been many researches to simplify DCNN computations, especially multiply-accumulate (MAC) operations that account for most processing time. Apart from conventional binary computing and as a promising alternative, stochastic computing (SC) was studied steadily for low-cost arithmetic operations. However, previous SC-DCNN approaches have critical limitations such as lack of scalability and accuracy loss. This dissertation first offers solutions to overcome those problems. Furthermore, SC has additional advantages over binary computing such as error tolerance. Those strengths are exploited and assessed in the dissertation. Meanwhile, quantization which replaces high precision dataflow by low-bit representation and arithmetic operations becomes popular for reduction of DCNN model size and computation cost. Currently, low-bit fixed-point representation is popularly used. The dissertation argues that SC and quantization are mutually beneficial. In other words, efficiency of SC-DCNN can be improved by usual quantization as the conventional binary computing does and a flexible SC feature can exploit quantization more effectively than the binary computing. Besides, more advanced quantization methods are emerging. In accordance with those, novel SC-MAC structures are devised to attain the benefits. For each contribution, RTL implemented SC accelerators are evaluated and compared with conventional binary implementations. Also, a small FPGA prototype demonstrates the viability of SC-DCNN. In a rapidly changing and developing deep learning world headed by conventional binary computing, multifariously enhanced SC, though not as popular as binary, is still competitive implementation with its own benefits.ope

Special Topics in Information Technology

This open access book presents thirteen outstanding doctoral dissertations in Information Technology from the Department of Electronics, Information and Bioengineering, Politecnico di Milano, Italy. Information Technology has always been highly interdisciplinary, as many aspects have to be considered in IT systems. The doctoral studies program in IT at Politecnico di Milano emphasizes this interdisciplinary nature, which is becoming more and more important in recent technological advances, in collaborative projects, and in the education of young researchers. Accordingly, the focus of advanced research is on pursuing a rigorous approach to specific research topics starting from a broad background in various areas of Information Technology, especially Computer Science and Engineering, Electronics, Systems and Control, and Telecommunications. Each year, more than 50 PhDs graduate from the program. This book gathers the outcomes of the thirteen best theses defended in 2019-20 and selected for the IT PhD Award. Each of the authors provides a chapter summarizing his/her findings, including an introduction, description of methods, main achievements and future work on the topic. Hence, the book provides a cutting-edge overview of the latest research trends in Information Technology at Politecnico di Milano, presented in an easy-to-read format that will also appeal to non-specialists