An Optoelectronic Stimulator for Retinal Prosthesis

Retinal prostheses require the presence of viable population of cells in the inner retina. Evaluations of retina with Age-Related Macular Degeneration (AMD) and Retinitis Pigmentosa (RP) have shown a large number of cells remain in the inner retina compared with the outer retina. Therefore, vision loss caused by AMD and RP is potentially treatable with retinal prostheses. Photostimulation based retinal prostheses have shown many advantages compared with retinal implants. In contrary to electrode based stimulation, light does not require mechanical contact. Therefore, the system can be completely external and not does have the power and degradation problems of implanted devices. In addition, the stimulating point is flexible and does not require a prior decision on the stimulation location. Furthermore, a beam of light can be projected on tissue with both temporal and spatial precision. This thesis aims at fi nding a feasible solution to such a system. Firstly, a prototype of an optoelectronic stimulator was proposed and implemented by using the Xilinx Virtex-4 FPGA evaluation board. The platform was used to demonstrate the possibility of photostimulation of the photosensitized neurons. Meanwhile, with the aim of developing a portable retinal prosthesis, a system on chip (SoC) architecture was proposed and a wide tuning range sinusoidal voltage-controlled oscillator (VCO) which is the pivotal component of the system was designed. The VCO is based on a new designed Complementary Metal Oxide Semiconductor (CMOS) Operational Transconductance Ampli er (OTA) which achieves a good linearity over a wide tuning range. Both the OTA and the VCO were fabricated in the AMS 0.35 µm CMOS process. Finally a 9X9 CMOS image sensor with spiking pixels was designed. Each pixel acts as an independent oscillator whose frequency is controlled by the incident light intensity. The sensor was fabricated in the AMS 0.35 µm CMOS Opto Process. Experimental validation and measured results are provided

Computational models of object motion detectors accelerated using FPGA technology

The detection of moving objects is a trivial task when performed by vertebrate retinas, yet a complex computer vision task. This PhD research programme has made three key contributions, namely: 1) a multi-hierarchical spiking neural network (MHSNN) architecture for detecting horizontal and vertical movements, 2) a Hybrid Sensitive Motion Detector (HSMD) algorithm for detecting object motion and 3) the Neuromorphic Hybrid Sensitive Motion Detector (NeuroHSMD) , a real-time neuromorphic implementation of the HSMD algorithm. The MHSNN is a customised 4 layers Spiking Neural Network (SNN) architecture designed to reflect the basic connectivity, similar to canonical behaviours found in the majority of vertebrate retinas (including human retinas). The architecture, was trained using images from a custom dataset generated in laboratory settings. Simulation results revealed that each cell model is sensitive to vertical and horizontal movements, with a detection error of 6.75% contrasted against the teaching signals (expected output signals) used to train the MHSNN. The experimental evaluation of the methodology shows that the MH SNN was not scalable because of the overall number of neurons and synapses which lead to the development of the HSMD. The HSMD algorithm enhanced an existing Dynamic Background subtraction (DBS) algorithm using a customised 3-layer SNN. The customised 3-layer SNN was used to stabilise the foreground information of moving objects in the scene, which improves the object motion detection. The algorithm was compared against existing background subtraction approaches, available on the Open Computer Vision (OpenCV) library, specifically on the 2012 Change Detection (CDnet2012) and the 2014 Change Detection (CDnet2014) benchmark datasets. The accuracy results show that the HSMD was ranked overall first and performed better than all the other benchmarked algorithms on four of the categories, across all eight test metrics. Furthermore, the HSMD is the first to use an SNN to enhance the existing dynamic background subtraction algorithm without a substantial degradation of the frame rate, being capable of processing images 720 × 480 at 13.82 Frames Per Second (fps) (CDnet2014) and 720 × 480 at 13.92 fps (CDnet2012) on a High Performance computer (96 cores and 756 GB of RAM). Although the HSMD analysis shows good Percentage of Correct Classifications (PCC) on the CDnet2012 and CDnet2014, it was identified that the 3-layer customised SNN was the bottleneck, in terms of speed, and could be improved using dedicated hardware. The NeuroHSMD is thus an adaptation of the HSMD algorithm whereby the SNN component has been fully implemented on dedicated hardware [Terasic DE10-pro Field-Programmable Gate Array (FPGA) board]. Open Computer Language (OpenCL) was used to simplify the FPGA design flow and allow the code portability to other devices such as FPGA and Graphical Processing Unit (GPU). The NeuroHSMD was also tested against the CDnet2012 and CDnet2014 datasets with an acceleration of 82% over the HSMD algorithm, being capable of processing 720 × 480 images at 28.06 fps (CDnet2012) and 28.71 fps (CDnet2014)

DICOM for EIT

With EIT starting to be used in routine clinical practice [1], it important that the clinically relevant information is portable between hospital data management systems. DICOM formats are widely used clinically and cover many imaging modalities, though not specifically EIT. We describe how existing DICOM specifications, can be repurposed as an interim solution, and basis from which a consensus EIT DICOM ‘Supplement’ (an extension to the standard) can be writte

Estimation of thorax shape for forward modelling in lungs EIT

The thorax models for pre-term babies are developed based on the CT scans from new-borns and their effect on image reconstruction is evaluated in comparison with other available models

Rapid generation of subject-specific thorax forward models

For real-time monitoring of lung function using accurate patient geometry, shape information needs to be acquired and a forward model generated rapidly. This paper shows that warping a cylindrical model to an acquired shape results in meshes of acceptable mesh quality, in terms of stretch and aspect ratio

Torso shape detection to improve lung monitoring

Two methodologies are proposed to detect the patient-specific boundary of the chest, aiming to produce a more accurate forward model for EIT analysis. Thus, a passive resistive and an inertial prototypes were prepared to characterize and reconstruct the shape of multiple phantoms. Preliminary results show how the passive device generates a minimum scatter between the reconstructed image and the actual shap

Nanoparticle electrical impedance tomography

We have developed a new approach to imaging with electrical impedance tomography (EIT) using gold nanoparticles (AuNPs) to enhance impedance changes at targeted tissue sites. This is achieved using radio frequency (RF) to heat nanoparticles while applying EIT imaging. The initial results using 5-nm citrate coated AuNPs show that heating can enhance the impedance in a solution containing AuNPs due to the application of an RF field at 2.60 GHz

Personality Identification from Social Media Using Deep Learning: A Review

Social media helps in sharing of ideas and information among people scattered around the world and thus helps in creating communities, groups, and virtual networks. Identification of personality is significant in many types of applications such as in detecting the mental state or character of a person, predicting job satisfaction, professional and personal relationship success, in recommendation systems. Personality is also an important factor to determine individual variation in thoughts, feelings, and conduct systems. According to the survey of Global social media research in 2018, approximately 3.196 billion social media users are in worldwide. The numbers are estimated to grow rapidly further with the use of mobile smart devices and advancement in technology. Support vector machine (SVM), Naive Bayes (NB), Multilayer perceptron neural network, and convolutional neural network (CNN) are some of the machine learning techniques used for personality identification in the literature review. This paper presents various studies conducted in identifying the personality of social media users with the help of machine learning approaches and the recent studies that targeted to predict the personality of online social media (OSM) users are reviewed