15 research outputs found
A 40 Mb/s VLC System Reusing an Existing Large LED Panel in an Indoor Office Environment
With advances in solid-state lighting, visible light communication (VLC) has emerged as a promising technology to enhance existing light-emitting diode (LED)-based lighting infrastructure by adding data communication capabilities to the illumination functionality. The last decade has witnessed the evolution of the VLC concept through global standardisation and product launches. Deploying VLC systems typically requires replacing existing light sources with new luminaires that are equipped with data communication functionality. To save the investment, it is clearly desirable to make the most of the existing illumination systems. This paper investigates the feasibility of adding data communication functionality to the existing lighting infrastructure. We do this by designing an experimental system in an indoor environment based on an off-the-shelf LED panel typically used in office environments, with the dimensions of 60 Ă 60 cm2. With minor modifications, the VLC function is implemented, and all of the modules of the LED panel are fully reused. A data rate of 40 Mb/s is supported at a distance of up to 2 m while using the multi-band carrierless amplitude and phase (CAP) modulation. Two main limiting factors for achieving higher data rates are observed. The first factor is the limited bandwidth of the LED string inside the panel. The second is the flicker due to the residual ripple of the bias current that is generated by the panelâs driver. Flicker is introduced by the low-cost driver, which provides bias currents that fluctuate in the low frequency range (less than several kilohertz). This significantly reduces the transmitterâs modulation depth. Concurrently, the driver can also introduce an effect that is similar to baseline wander at the receiver if the flicker is not completely filtered out. We also proposed a solution based on digital signal processing (DSP) to mitigate the flicker issue at the receiver side and its effectiveness has been confirmed
Experimental Demonstration of OFDM/OQAM Transmission for Visible Light Communications
We propose a modified orthogonal frequency division multiplexing/offset quadrature amplitude modulation (OFDM/OQAM) scheme for visible light communications (VLC). The OFDM/OQAM VLC system can efficiently boost the data rate, and combat multipath induced the inter symbol interference (ISI) and inter carrier interference (ICI). To combat the effect of intrinsic imaginary interference, intrasymbol frequency-domain averaging and minimum mean squared error (MMSE), combined with interference approximation method, are proposed. The experiment results show that the proposed system offers similar bit error rate performance to that of OFDM, while the bit rate is increased by 9% for the elimination of cyclic-prefix and guard band
A Multi-CAP Visible-Light Communications System With 4.85-b/s/Hz Spectral Efficiency
In this paper, we experimentally demonstrate a multiband carrierless amplitude and phase modulation format for the first time in VLC. We split a conventional carrierless amplitude and phase modulated signal into m subcarriers in order to protect from the attenuation experienced at high frequencies in low-pass VLC systems. We investigate the relationship between throughput/spectral efficiency and m, where m = {10, 8, 6, 4, 2, 1} subcarriers over a fixed total signal bandwidth of 6.5 MHz. We show that transmission speeds (spectral efficiencies) of 31.53 (4.85), 30.88 (4.75), 25.40 (3.90), 23.65 (3.60), 15.78 (2.40), and 9.04 (1.40) Mb/s (b/s/Hz) can be achieved for the listed values of m, respectively
DC biased input stage with differential photocurrent sensing for VLC front-ends
The reverse bias voltage across the PIN photodiode is essential for the photodiode to operate in the photoconductive mode. This paper presents an input bias stage with differential photocurrent sensing for VLC front-ends. The bias voltage is provided from within the transimpedance amplifierâs (TIA) circuit eliminating the need of external bias voltage. The amount of bias voltage could be optimised according to the photodiode required sensitivity and capacitance. The differential configuration makes the TIA immune to any common mode noise. The proposed method is applied to a hypothetical TIA and results are compared with single ended structure. Simulation results showed that using this approach it is possible to achieve a transimpedance gain of 120 dBΩ over a maximum bandwidth of 14.5 MHz with a common mode rejection ratio of 61 dB while the circuit provides a controlled bias voltage of up to 6 V across the PIN photodiode eliminating the need for external bias voltage source
A review of gallium nitride LEDs for multi-gigabit-per-second visible light data communications
The field of visible light communications (VLC) has gained significant interest over the last decade, in both fibre and free-space embodiments. In fibre systems, the availability of low cost plastic optical fibre (POF) that is compatible with visible data communications has been a key enabler. In free-space applications, the availability of hundreds of THz of the unregulated spectrum makes VLC attractive for wireless communications. This paper provides an overview of the recent developments in VLC systems based on gallium nitride (GaN) light-emitting diodes (LEDs), covering aspects from sources to systems. The state-of-the-art technology enabling bandwidth of GaN LEDs in the range of >400 MHz is explored. Furthermore, advances in key technologies, including advanced modulation, equalisation, and multiplexing that have enabled free-space VLC data rates beyond 10 Gb/s are also outlined
Recommended from our members
WiFO: A hybrid communication network based on integrated free-space optical and WiFi femtocells
Developments in smart home technology and the Internet of Things have significantly increased the demand for high-speed indoor wireless links. Although the majority of the research conducted in this area is still focused on the efficient usage of radio frequency (RF) spectrum, free-space optical (FSO) networks have also been explored as an alternative due to their large bandwidth potentials and low interference. In this paper we present a hybrid FSO and WiFi system (WiFO) that seamlessly integrates optical femtocell architecture with high mobility WiFi networks. Each FSO femtocell in this indoor communication system is capable of transmitting and receiving data at a rate of 50 Mbps over a distance of up to three meters with a field-of-view of +/- 15 degrees, while still achieving a low bit error rate between 10(-6), and 10(-4). Reed-Solomon forward error correction codes were also applied to the data stream to further reduce the bit error rate to below 10(-7). Different than many other free-space optical communication network using static transceivers, mobility in our WiFO system is achieved through the integration of a WiFi channel in the network protocol. The WiFi channel provides a feedback mechanism and allows for seamless handoffs between FSO femtocells. Additionally, we have experimentally demonstrated the advantage of this WiFO architecture by comparing the throughput of our system with a standard WiFi link in a realistic scenario. Our investigation has shown that the WiFO system presented in this work offers a cost-effective and easy-to-implement approach to significantly increase the capacity of current WiFi networks
Experimental Characterization of RGB LED Transceiver in Low-Complexity LED-to-LED Link
This paper proposes a low-complexity and energy-efficient light emitting diode (LED)-to-LED communication system for Internet of Things (IoT) devices with data rates up to 200 kbps over an error-free transmission distance up to 7 cm. The system is based on off-the-shelf red-green-blue (RGB) LEDs, of which the red sub-LED is employed as photodetector in photovoltaic mode while the green sub-LED is the transmitter. The LED photodetector is characterized in the terms of its noise characteristics and its response to the light intensity. The system performance is then analysed in terms of bandwidth, bit error rate (BER) and the signal to noise ratio (SNR). A matched filter is proposed, which optimises the performance and increases the error-free distance
Recommended from our members
Design and Analysis of Free-space Optical Communications Systems for Next Generation Short-range Wireless Networks
This dissertation focuses on indoor free-space optical communications systems for use in short range wireless networks. We propose that current radio frequency wireless links be augmented or replaced with optical frequency links due to overcrowding in the radio frequency spectrum. Optical frequencies contain hundreds of terahertz of unregulated bandwidth and offer a physical layer of protection due to the inherently line-of-sight nature of near infrared light. We first present a hybrid optical and radio frequency link based on inexpensive LEDs in which a downlink is established optically, while the uplink is routed through preexisting radio frequency channels. Second, an all optical dual channel laser-based communication system is implemented consisting of a medium bandwidth wide-angle optical femtocell and a high-speed line-of-sight optical attocell. This approach balances the diverse needs of end users by providing links optimized for both mobility and bandwidth. Lastly, we demonstrate a high-power vertical cavity surface emitting laser (VCSEL) array transmitter for use in optical femtocells. A complimentary design for a distributed current laser driver is also presented