1,864 research outputs found
AoA-aware Probabilistic Indoor Location Fingerprinting using Channel State Information
With expeditious development of wireless communications, location
fingerprinting (LF) has nurtured considerable indoor location based services
(ILBSs) in the field of Internet of Things (IoT). For most pattern-matching
based LF solutions, previous works either appeal to the simple received signal
strength (RSS), which suffers from dramatic performance degradation due to
sophisticated environmental dynamics, or rely on the fine-grained physical
layer channel state information (CSI), whose intricate structure leads to an
increased computational complexity. Meanwhile, the harsh indoor environment can
also breed similar radio signatures among certain predefined reference points
(RPs), which may be randomly distributed in the area of interest, thus mightily
tampering the location mapping accuracy. To work out these dilemmas, during the
offline site survey, we first adopt autoregressive (AR) modeling entropy of CSI
amplitude as location fingerprint, which shares the structural simplicity of
RSS while reserving the most location-specific statistical channel information.
Moreover, an additional angle of arrival (AoA) fingerprint can be accurately
retrieved from CSI phase through an enhanced subspace based algorithm, which
serves to further eliminate the error-prone RP candidates. In the online phase,
by exploiting both CSI amplitude and phase information, a novel bivariate
kernel regression scheme is proposed to precisely infer the target's location.
Results from extensive indoor experiments validate the superior localization
performance of our proposed system over previous approaches
Position and Orientation Estimation through Millimeter Wave MIMO in 5G Systems
Millimeter wave signals and large antenna arrays are considered enabling
technologies for future 5G networks. While their benefits for achieving
high-data rate communications are well-known, their potential advantages for
accurate positioning are largely undiscovered. We derive the Cram\'{e}r-Rao
bound (CRB) on position and rotation angle estimation uncertainty from
millimeter wave signals from a single transmitter, in the presence of
scatterers. We also present a novel two-stage algorithm for position and
rotation angle estimation that attains the CRB for average to high
signal-to-noise ratio. The algorithm is based on multiple measurement vectors
matching pursuit for coarse estimation, followed by a refinement stage based on
the space-alternating generalized expectation maximization algorithm. We find
that accurate position and rotation angle estimation is possible using signals
from a single transmitter, in either line-of- sight, non-line-of-sight, or
obstructed-line-of-sight conditions.Comment: The manuscript has been revised, and increased from 27 to 31 pages.
Also, Fig.2, Fig. 10 and Table I are adde
Acoustical Ranging Techniques in Embedded Wireless Sensor Networked Devices
Location sensing provides endless opportunities for a wide range of applications in GPS-obstructed environments;
where, typically, there is a need for higher degree of accuracy. In this article, we focus on robust range
estimation, an important prerequisite for fine-grained localization. Motivated by the promise of acoustic in
delivering high ranging accuracy, we present the design, implementation and evaluation of acoustic (both
ultrasound and audible) ranging systems.We distill the limitations of acoustic ranging; and present efficient
signal designs and detection algorithms to overcome the challenges of coverage, range, accuracy/resolution,
tolerance to Doppler’s effect, and audible intensity. We evaluate our proposed techniques experimentally on
TWEET, a low-power platform purpose-built for acoustic ranging applications. Our experiments demonstrate
an operational range of 20 m (outdoor) and an average accuracy 2 cm in the ultrasound domain. Finally,
we present the design of an audible-range acoustic tracking service that encompasses the benefits of a near-inaudible
acoustic broadband chirp and approximately two times increase in Doppler tolerance to achieve better performance
Channel Sounding for the Masses: Low Complexity GNU 802.11b Channel Impulse Response Estimation
New techniques in cross-layer wireless networks are building demand for
ubiquitous channel sounding, that is, the capability to measure channel impulse
response (CIR) with any standard wireless network and node. Towards that goal,
we present a software-defined IEEE 802.11b receiver and CIR estimation system
with little additional computational complexity compared to 802.11b reception
alone. The system implementation, using the universal software radio peripheral
(USRP) and GNU Radio, is described and compared to previous work. By overcoming
computational limitations and performing direct-sequence spread-spectrum
(DS-SS) matched filtering on the USRP, we enable high-quality yet inexpensive
CIR estimation. We validate the channel sounder and present a drive test
campaign which measures hundreds of channels between WiFi access points and an
in-vehicle receiver in urban and suburban areas
A Review of Indoor Millimeter Wave Device-based Localization and Device-free Sensing Technologies and Applications
The commercial availability of low-cost millimeter wave (mmWave)
communication and radar devices is starting to improve the penetration of such
technologies in consumer markets, paving the way for large-scale and dense
deployments in fifth-generation (5G)-and-beyond as well as 6G networks. At the
same time, pervasive mmWave access will enable device localization and
device-free sensing with unprecedented accuracy, especially with respect to
sub-6 GHz commercial-grade devices. This paper surveys the state of the art in
device-based localization and device-free sensing using mmWave communication
and radar devices, with a focus on indoor deployments. We first overview key
concepts about mmWave signal propagation and system design. Then, we provide a
detailed account of approaches and algorithms for localization and sensing
enabled by mmWaves. We consider several dimensions in our analysis, including
the main objectives, techniques, and performance of each work, whether each
research reached some degree of implementation, and which hardware platforms
were used for this purpose. We conclude by discussing that better algorithms
for consumer-grade devices, data fusion methods for dense deployments, as well
as an educated application of machine learning methods are promising, relevant
and timely research directions.Comment: 43 pages, 13 figures. Accepted in IEEE Communications Surveys &
Tutorials (IEEE COMST
Supervised Control of a Flying Performing Robot using its Intrinsic Sound
We present the current results of our ongoing research in achieving efficient control of a flying robot for a wide variety of possible applications. A lightweight small indoor helicopter has been equipped with an embedded system and relatively simple sensors to achieve autonomous stable flight. The controllers have been tuned using genetic algorithms to further enhance flight stability. A number of additional sensors would need to be attached to the helicopter to enable it to sense more of its environment such as its current location or the location of obstacles like the walls of the room it is flying in. The lightweight nature of the helicopter very much restricts the amount of sensors that can be attached to it. We propose utilising the intrinsic sound signatures of the helicopter to locate it and to extract features about its current state, using another supervising robot. The analysis of this information is then sent back to the helicopter using an uplink to enable the helicopter to further stabilise its flight and correct its position and flight path without the need for additional sensors
UWB Pulse Radar for Human Imaging and Doppler Detection Applications
We were motivated to develop new technologies capable of identifying human life through walls. Our goal is to pinpoint multiple people at a time, which could pay dividends during military operations, disaster rescue efforts, or assisted-living. Such system requires the combination of two features in one platform: seeing-through wall localization and vital signs Doppler detection.
Ultra-wideband (UWB) radar technology has been used due to its distinct advantages, such as ultra-low power, fine imaging resolution, good penetrating through wall characteristics, and high performance in noisy environment. Not only being widely used in imaging systems and ground penetrating detection, UWB radar also targets Doppler sensing, precise positioning and tracking, communications and measurement, and etc.
A robust UWB pulse radar prototype has been developed and is presented here. The UWB pulse radar prototype integrates seeing-through imaging and Doppler detection features in one platform. Many challenges existing in implementing such a radar have been addressed extensively in this dissertation. Two Vivaldi antenna arrays have been designed and fabricated to cover 1.5-4.5 GHz and 1.5-10 GHz, respectively. A carrier-based pulse radar transceiver has been implemented to achieve a high dynamic range of 65dB. A 100 GSPS data acquisition module is prototyped using the off-the-shelf field-programmable gate array (FPGA) and analog-to-digital converter (ADC) based on a low cost solution: equivalent time sampling scheme. Ptolemy and transient simulation tools are used to accurately emulate the linear and nonlinear components in the comprehensive simulation platform, incorporated with electromagnetic theory to account for through wall effect and radar scattering.
Imaging and Doppler detection examples have been given to demonstrate that such a “Biometrics-at-a-glance” would have a great impact on the security, rescuing, and biomedical applications in the future
- …