The measurement of heats of solution of high melting metallic systems in an electromagnetic levitation field

A method was tested for measuring the enthalpies of mixing of liquid metallic alloying systems, involving the combination of two samples in the electromagnetic field of an induction coil. The heat of solution is calculated from the pyrometrically measured temperature effect, the heat capacity of the alloy, and the heat content of the added sample. The usefulness of the method was tested experimentally with iron-copper and niobium-silicon systems. This method should be especially applicable to high-melting alloys, for which conventional measurements have failed

Aerospace medicine and biology. A continuing bibliography with indexes, supplement 206, May 1980

This bibliography lists 169 reports, articles, and other documents introduced into the NASA scientific and technical information system in April 1980

Ultimate intrinsic-coercivity samarium-cobalt magnet: An Earth-based feasibility study for space-shuttle missions

Techniques for containerless melting and solidification of the samarium-cobalt alloy without excessive oxidation were developed. The rationale for extending these experiments in a weightless environment is also discussed. The effect of oxygen content from 0.15 to 0.63 weight percent and grain size in the range of 2 to 10 micrometers has been examined on arc-plasma-sprayed SmCo5 magnets. Contrary to expectations, the larger grain sizes tended to improve the coercivities. This was attributed to an increase in homogeneity resulting from higher temperature treatments used to produce larger grain size. No significant differences in coercivity were observed on the basis of oxygen content in the range examined. It is expected that more meaningful data on the relationship between oxygen content and coercivity will be seen when the oxygen content can be lowered to less than 0.1 weight percent

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 297)

This bibliography lists 89 reports, articles and other documents introduced into the NASA scientific and technical information system in April, 1987

Heat generation depth and temperature distribution in solar receiver tubes subjected to induction

Induction heating is commonly used in laboratory-scale facilities to replicate the heating conditions of the receiver tubes of concentrated solar power plants. This work aims at shedding light at the induction heating characteristics for such applications through the development of a multiphysics numerical model capable of replicating the experimental conditions of a molten salt loop locally heated by an induction heater. In the experiments, a stainless steel pipe is heated on its external surface by the induction heater, which is switched on and off during the experimental data acquisition while molten salts are continuously circulating in its interior. These conditions are replicated, for the first time, in a two-dimensional numerical domain fully coupling the electromagnetic and thermal physics, including thermally dependent material properties of the heated pipe. Once validated against the experiments, the numerical results revealed that the volumetric nature of the induction heating shall be considered for an accurate representation of the temperature profile inside the tube. As a novelty, different equivalent surface boundary conditions are presented and, despite the Gaussian-like behavior of the induction heating on the surface of the tube, the results indicate that there exists no equivalent wall boundary condition to fully replicate the temperature profile obtained with the induction heater. The effect of independently varying experimental parameters such as the geometry of the pipe (i.e., diameter and thickness) and its distance to the induction heating system is also evaluated. Using large diameters of the tube reduces the difference between the angular temperature profile obtained using induction heating and a simplified wall boundary condition. For small wall thicknesses, the induction heating is capable of penetrating along the whole thickness of the tube, the total heat generated in the volume of the tube being exposed to the counteracting effects of the volumetric generation and the enhancement of the heat dissipation by the molten salt, as both of them increase for small thicknesses. The distance of the inductor to the pipe wall appears to maintain the volumetric characteristics of the heating and only affects the induction heating magnitude and efficiency.This work has been funded by Programa de Atracción de Talento (Modalidad 2) de la Comunidad de Madrid (Spain) 2019-T2/AMB-15938 and the project RTI2018-096664-B-C21 (MICINN, FEDER/UE). Eduardo Cano-Pleite acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 programme under the Marie Sklodowska-Curie grant agreement No. 801538

Effect of pulsed magnetic field pre-treatment of AISI 52100 steel on the coefficient of sliding friction and wear in pin-on-disk tests

Disc specimens manufactured from commercial bearing rollers (AISI 52100 steel, 62–63 HRC) in initial state and after pre-treatment by pulsed magnetic field (PMF) with a magnetic field strength of 1–7 MA/m were tested with sunflower oil using pin-on-disk apparatus. According to the obtained results the treatment causes a reduction in the coefficient of friction and wear. To explain the results, nano- and microhardness tests as well as optical and atomic force microscopy were used. Reasons of the effect of PMF on the friction and wear were discussed.Peer reviewe

Magnetic levitation of large liquid volume

It is well known from experiments and industrial applications of cold crucible melting that an intense AC magnetic field can be used to levitate large volumes of liquid metal in the terrestrial conditions. The levitation confinement mechanism for large volumes of fluid is considerably different from the case of a small droplet, where surface tension plays a key role in constraining the liquid outflow at the critical bottom point. The dynamic interaction between the oscillatory motion of the free surface and the effects of turbulent flow is analysed using a unified numerical model, which describes the time dependent behaviour of the liquid metal and the magnetic field. The MHD modified k-? turbulence model is used to describe the mixing and damping properties at smaller scales not resolved by the macro model. The numerical multiphysics simulations suggest that it is possible to levitate a few kilograms of liquid metal in a cold crucible without requiring mechanical support from the container walls. Possible applications to the processing of reactive metals are discussed