Securing SOME/IP for In-Vehicle Service Protection

Although high-speed in-vehicle networks are being increasingly adopted by the industry to support emerging use cases, previous research already demonstrated that car hacking is a real threat. This paper formalizes a novel framework proposed to provide improved security to the emerging SOME/IP middleware, without introducing at the same time limitations in the communication patterns available. Most notably, the entire traffic matrix is designed to be configured using simple high-level rules, clearly stating who can talk to whom according to the service abstraction adopted by SOME/IP. Three incremental security levels are made available, accounting for different services being associated with different requirements. The core security protocol, encompassing a session establishment phase followed by the transmission of secured SOME/IP messages, has been formally verified, to prove its correctness in terms of authentication and secrecy properties. Performance-wise, in-depth experimental evaluations conducted with an extended version of vsomeip confirmed the introduction of quite limited penalties compared to the bare unsecured implementation

EXT-TAURUM P2T: an Extended Secure CAN-FD Architecture for Road Vehicles

The automobile industry is no longer relying on pure mechanical systems; instead, it benefits from advanced Electronic Control Units (ECUs) in order to provide new and complex functionalities in the effort to move toward fully connected cars. However, connected cars provide a dangerous playground for hackers. Vehicles are becoming increasingly vulnerable to cyber attacks as they come equipped with more connected features and control systems. This situation may expose strategic assets in the automotive value chain. In this scenario, the Controller Area Network (CAN) is the most widely used communication protocol in the automotive domain. However, this protocol lacks encryption and authentication. Consequently, any malicious/hijacked node can cause catastrophic accidents and financial loss. Starting from the analysis of the vulnerability connected to the CAN communication protocol in the automotive domain, this paper proposes EXT-TAURUM P2T a new low-cost secure CAN-FD architecture for the automotive domain implementing secure communication among ECUs, a novel key provisioning strategy, intelligent throughput management, and hardware signature mechanisms. The proposed architecture has been implemented, resorting to a commercial Multi-Protocol Vehicle Interface module, and the obtained results experimentally demonstrate the approach’s feasibility

Automotive Ethernet architecture and security: challenges and technologies

Vehicle infrastructure must address the challenges posed by today's advances toward connected and autonomous vehicles. To allow for more flexible architectures, high-bandwidth connections and scalability are needed to connect many sensors and electronic control units (ECUs). At the same time, deterministic and low latency is a critical and significant design requirement to support urgent real-time applications in autonomous vehicles. As a recent solution, the time-sensitive network (TSN) was introduced as Ethernet-based amendments in IEEE 802.1 TSN standards to meet those needs. However, it had hurdle to be overcome before it can be used effectively. This paper discusses the latest studies concerning the automotive Ethernet requirements, including transmission delay studies to improve worst-case end-to-end delay and end-to-end jitter. Also, the paper focuses on the securing Ethernet-based in-vehicle networks (IVNs) by reviewing new encryption and authentication methods and approaches

Robust and secure resource management for automotive cyber-physical systems

2022 Spring.Includes bibliographical references.Modern vehicles are examples of complex cyber-physical systems with tens to hundreds of interconnected Electronic Control Units (ECUs) that manage various vehicular subsystems. With the shift towards autonomous driving, emerging vehicles are being characterized by an increase in the number of hardware ECUs, greater complexity of applications (software), and more sophisticated in-vehicle networks. These advances have resulted in numerous challenges that impact the reliability, security, and real-time performance of these emerging automotive systems. Some of the challenges include coping with computation and communication uncertainties (e.g., jitter), developing robust control software, detecting cyber-attacks, ensuring data integrity, and enabling confidentiality during communication. However, solutions to overcome these challenges incur additional overhead, which can catastrophically delay the execution of real-time automotive tasks and message transfers. Hence, there is a need for a holistic approach to a system-level solution for resource management in automotive cyber-physical systems that enables robust and secure automotive system design while satisfying a diverse set of system-wide constraints. ECUs in vehicles today run a variety of automotive applications ranging from simple vehicle window control to highly complex Advanced Driver Assistance System (ADAS) applications. The aggressive attempts of automakers to make vehicles fully autonomous have increased the complexity and data rate requirements of applications and further led to the adoption of advanced artificial intelligence (AI) based techniques for improved perception and control. Additionally, modern vehicles are becoming increasingly connected with various external systems to realize more robust vehicle autonomy. These paradigm shifts have resulted in significant overheads in resource constrained ECUs and increased the complexity of the overall automotive system (including heterogeneous ECUs, network architectures, communication protocols, and applications), which has severe performance and safety implications on modern vehicles. The increased complexity of automotive systems introduces several computation and communication uncertainties in automotive subsystems that can cause delays in applications and messages, resulting in missed real-time deadlines. Missing deadlines for safety-critical automotive applications can be catastrophic, and this problem will be further aggravated in the case of future autonomous vehicles. Additionally, due to the harsh operating conditions (such as high temperatures, vibrations, and electromagnetic interference (EMI)) of automotive embedded systems, there is a significant risk to the integrity of the data that is exchanged between ECUs which can lead to faulty vehicle control. These challenges demand a more reliable design of automotive systems that is resilient to uncertainties and supports data integrity goals. Additionally, the increased connectivity of modern vehicles has made them highly vulnerable to various kinds of sophisticated security attacks. Hence, it is also vital to ensure the security of automotive systems, and it will become crucial as connected and autonomous vehicles become more ubiquitous. However, imposing security mechanisms on the resource constrained automotive systems can result in additional computation and communication overhead, potentially leading to further missed deadlines. Therefore, it is crucial to design techniques that incur very minimal overhead (lightweight) when trying to achieve the above-mentioned goals and ensure the real-time performance of the system. We address these issues by designing a holistic resource management framework called ROSETTA that enables robust and secure automotive cyber-physical system design while satisfying a diverse set of constraints related to reliability, security, real-time performance, and energy consumption. To achieve reliability goals, we have developed several techniques for reliability-aware scheduling and multi-level monitoring of signal integrity. To achieve security objectives, we have proposed a lightweight security framework that provides confidentiality and authenticity while meeting both security and real-time constraints. We have also introduced multiple deep learning based intrusion detection systems (IDS) to monitor and detect cyber-attacks in the in-vehicle network. Lastly, we have introduced novel techniques for jitter management and security management and deployed lightweight IDSs on resource constrained automotive ECUs while ensuring the real-time performance of the automotive systems

Intrusion Resilience Systems for Modern Vehicles

Current vehicular Intrusion Detection and Prevention Systems either incur high false-positive rates or do not capture zero-day vulnerabilities, leading to safety-critical risks. In addition, prevention is limited to few primitive options like dropping network packets or extreme options, e.g., ECU Bus-off state. To fill this gap, we introduce the concept of vehicular Intrusion Resilience Systems (IRS) that ensures the resilience of critical applications despite assumed faults or zero-day attacks, as long as threat assumptions are met. IRS enables running a vehicular application in a replicated way, i.e., as a Replicated State Machine, over several ECUs, and then requiring the replicated processes to reach a form of Byzantine agreement before changing their local state. Our study rides the mutation of modern vehicular environments, which are closing the gap between simple and resource-constrained "real-time and embedded systems", and complex and powerful "information technology" ones. It shows that current vehicle (e.g., Zonal) architectures and networks are becoming plausible for such modular fault and intrusion tolerance solutions,deemed too heavy in the past. Our evaluation on a simulated Automotive Ethernet network running two state-of-the-art agreement protocols (Damysus and Hotstuff) shows that the achieved latency and throughout are feasible for many Automotive applications

A comprehensive survey of V2X cybersecurity mechanisms and future research paths

Recent advancements in vehicle-to-everything (V2X) communication have notably improved existing transport systems by enabling increased connectivity and driving autonomy levels. The remarkable benefits of V2X connectivity come inadvertently with challenges which involve security vulnerabilities and breaches. Addressing security concerns is essential for seamless and safe operation of mission-critical V2X use cases. This paper surveys current literature on V2X security and provides a systematic and comprehensive review of the most relevant security enhancements to date. An in-depth classification of V2X attacks is first performed according to key security and privacy requirements. Our methodology resumes with a taxonomy of security mechanisms based on their proactive/reactive defensive approach, which helps identify strengths and limitations of state-of-the-art countermeasures for V2X attacks. In addition, this paper delves into the potential of emerging security approaches leveraging artificial intelligence tools to meet security objectives. Promising data-driven solutions tailored to tackle security, privacy and trust issues are thoroughly discussed along with new threat vectors introduced inevitably by these enablers. The lessons learned from the detailed review of existing works are also compiled and highlighted. We conclude this survey with a structured synthesis of open challenges and future research directions to foster contributions in this prominent field.This work is supported by the H2020-INSPIRE-5Gplus project (under Grant agreement No. 871808), the ”Ministerio de Asuntos Económicos y Transformacion Digital” and the European Union-NextGenerationEU in the frameworks of the ”Plan de Recuperación, Transformación y Resiliencia” and of the ”Mecanismo de Recuperación y Resiliencia” under references TSI-063000-2021-39/40/41, and the CHIST-ERA-17-BDSI-003 FIREMAN project funded by the Spanish National Foundation (Grant PCI2019-103780).Peer ReviewedPostprint (published version

Protecting In-Vehicle Services : Security-Enabled SOME/IP Middleware

With every generation, vehicles are becoming smarter and more oriented toward information and communications technology (ICT). However, computerization is posing unforeseen challenges in a sector for which the first goal must be safety: car hacking has been shown to be a real threat. This article presents a novel mechanism to provide improved security for applications executed in the vehicle based on the principle of defining exactly who can talk to whom. The proposed security framework targets Ethernet-based communications and is tightly integrated within the emerging Scalable service-Oriented MiddlewarE over IP (SOME/IP) middleware. No complex configurations are needed: simple high-level rules, clearly stating the communications allowed, are the only element required to enable the security features. The designed solution has been implemented as a proof of concept (PoC) inside the vsomeip stack to evaluate the validity of the approach proposed: experimental measurements confirm that the additional overhead introduced in end-to-end communication is negligible