S/W Fault-tolerant OFP System for UAVs based on Partition Computing

AbstractPartition computing of the new Integrated Modular Avionics architecture reduces the heavy cabling of traditional federated architecture. On the other hand, fault-tolerant Operational Flight Programs (OFP) for unmanned aerial vehicles have usually been implemented as primary-backup systems based on dual nodes. However, in the case of a small UAV, it is preferred to implement a S/W fault-tolerant system that runs primary and recovery systems together in a single flight control computer to reduce the payload. In this case, because the primary and backup must not interfere with each other in using CPU and memory, it is common to use virtualization-based partitions. In this paper, a new S/W fault-tolerant OFP based on the real-time-object partition, TMO.p, is presented to overcome the large overheads of virtualization approaches

Safety-Critical Communication in Avionics

The aircraft of today use electrical fly-by-wire systems for manoeuvring. These safety-critical distributed systems are called flight control systems and put high requirements on the communication networks that interconnect the parts of the systems. Reliability, predictability, flexibility, low weight and cost are important factors that all need to be taken in to consideration when designing a safety-critical communication system. In this thesis certification issues, requirements in avionics, fault management, protocols and topologies for safety-critical communication systems in avionics are discussed and investigated. The protocols that are investigated in this thesis are: TTP/C, FlexRay and AFDX, as a reference protocol MIL-STD-1553 is used. As reference architecture analogue point-to-point is used. The protocols are described and evaluated regarding features such as services, maturity, supported physical layers and topologies.Pros and cons with each protocol are then illustrated by a theoretical implementation of a flight control system that uses each protocol for the highly critical communication between sensors, actuators and flight computers.The results show that from a theoretical point of view TTP/C could be used as a replacement for a point-to-point flight control system. However, there are a number of issues regarding the physical layer that needs to be examined. Finally a TTP/C cluster has been implemented and basic functionality tests have been conducted. The plan was to perform tests on delays, start-up time and reintegration time but the time to acquire the proper hardware for these tests exceeded the time for the thesis work. More advanced testing will be continued here at Saab beyond the time frame of this thesis

Industrial Applications: New Solutions for the New Era

This book reprints articles from the Special Issue "Industrial Applications: New Solutions for the New Age" published online in the open-access journal Machines (ISSN 2075-1702). This book consists of twelve published articles. This special edition belongs to the "Mechatronic and Intelligent Machines" section

Air Force Institute of Technology Research Report 2006

This report summarizes the research activities of the Air Force Institute of Technology’s Graduate School of Engineering and Management. It describes research interests and faculty expertise; lists student theses/dissertations; identifies research sponsors and contributions; and outlines the procedures for contacting the school. Included in the report are: faculty publications, conference presentations, consultations, and funded research projects. Research was conducted in the areas of Aeronautical and Astronautical Engineering, Electrical Engineering and Electro-Optics, Computer Engineering and Computer Science, Systems and Engineering Management, Operational Sciences, Mathematics, Statistics and Engineering Physics

NASA Capability Roadmaps Executive Summary

This document is the result of eight months of hard work and dedication from NASA, industry, other government agencies, and academic experts from across the nation. It provides a summary of the capabilities necessary to execute the Vision for Space Exploration and the key architecture decisions that drive the direction for those capabilities. This report is being provided to the Exploration Systems Architecture Study (ESAS) team for consideration in development of an architecture approach and investment strategy to support NASA future mission, programs and budget requests. In addition, it will be an excellent reference for NASA's strategic planning. A more detailed set of roadmaps at the technology and sub-capability levels are available on CD. These detailed products include key driving assumptions, capability maturation assessments, and technology and capability development roadmaps

3D-in-2D Displays for ATC.

This paper reports on the efforts and accomplishments of the 3D-in-2D Displays for ATC project at the end of Year 1. We describe the invention of 10 novel 3D/2D visualisations that were mostly implemented in the Augmented Reality ARToolkit. These prototype implementations of visualisation and interaction elements can be viewed on the accompanying video. We have identified six candidate design concepts which we will further research and develop. These designs correspond with the early feasibility studies stage of maturity as defined by the NASA Technology Readiness Level framework. We developed the Combination Display Framework from a review of the literature, and used it for analysing display designs in terms of display technique used and how they are combined. The insights we gained from this framework then guided our inventions and the human-centered innovation process we use to iteratively invent. Our designs are based on an understanding of user work practices. We also developed a simple ATC simulator that we used for rapid experimentation and evaluation of design ideas. We expect that if this project continues, the effort in Year 2 and 3 will be focus on maturing the concepts and employment in a operational laboratory settings

Unmanned Aerial Vehicle (UAV)-Enabled Wireless Communications and Networking

The emerging massive density of human-held and machine-type nodes implies larger traffic deviatiolns in the future than we are facing today. In the future, the network will be characterized by a high degree of flexibility, allowing it to adapt smoothly, autonomously, and efficiently to the quickly changing traffic demands both in time and space. This flexibility cannot be achieved when the network’s infrastructure remains static. To this end, the topic of UAVs (unmanned aerial vehicles) have enabled wireless communications, and networking has received increased attention. As mentioned above, the network must serve a massive density of nodes that can be either human-held (user devices) or machine-type nodes (sensors). If we wish to properly serve these nodes and optimize their data, a proper wireless connection is fundamental. This can be achieved by using UAV-enabled communication and networks. This Special Issue addresses the many existing issues that still exist to allow UAV-enabled wireless communications and networking to be properly rolled out

Swarm Based Implementation of a Virtual Distributed Database System in a Sensor Network

The deployment of unmanned aerial vehicles (UAVs) in recent military operations has had success in carrying out surveillance and combat missions in sensitive areas. An area of intense research on UAVs has been on controlling a group of small-sized UAVs to carry out reconnaissance missions normally undertaken by large UAVs such as Predator or Global Hawk. A control strategy for coordinating the UAV movements of such a group of UAVs adopts the bio-inspired swarm model to produce autonomous group behavior. This research proposes establishing a distributed database system on a group of swarming UAVs, providing for data storage during a reconnaissance mission. A distributed database system model is simulated treating each UAV as a distributed database site connected by a wireless network. In this model, each UAV carries a sensor and communicates to a command center when queried. Drawing equivalence to a sensor network, the network of UAVs poses as a dynamic ad-hoc sensor network. The distributed database system based on a swarm of UAVs is tested against a set of reconnaissance test suites with respect to evaluating system performance. The design of experiments focuses on the effects of varying the query input and types of swarming UAVs on overall system performance. The results show that the topology of the UAVs has a distinct impact on the output of the sensor database. The experiments measuring system delays also confirm the expectation that in a distributed system, inter-node communication costs outweigh processing costs

Aeronautical engineering: A continuing bibliography with indexes (supplement 258)

This bibliography lists 536 reports, articles, and other documents introduced into the NASA scientific and technical information system in October 1990. Subject coverage includes: design, construction and testing of aircraft and aircraft engines; aircraft components, equipment and systems; ground support systems; and theoretical and applied aspects of aerodynamics and general fluid dynamics

Social work with airports passengers

Social work at the airport is in to offer to passengers social services. The main methodological position is that people are under stress, which characterized by a particular set of characteristics in appearance and behavior. In such circumstances passenger attracts in his actions some attention. Only person whom he trusts can help him with the documents or psychologically