Performance of high rate space-time trellis coded modulation in fading channels.

Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2005.Future wireless communication systems promise to offer a variety of multimedia services which require reliable transmission at high data rates over wireless links. Multiple input multiple output (MIMO) systems have received a great deal of attention because they provide very high data rates for such links. Theoretical studies have shown that the quality provided by MIMO systems can be increased by using space-time codes. Space-time codes combine both space (antenna) and time diversity in the transmitter to increase the efficiency of MIMO system. The three primary approaches, layered spacetime architecture, space-time trellis coding (STTC) and space-time block coding (STBC) represent a way to investigate transmitter-based signal processing for diversity exploitation and interference suppression. The advantages of STBC (i.e. low decoding complexity) and STTC (i.e. TCM encoder structure) can be used to design a high rate space-time trellis coded modulation (HR-STTCM). Most space-time codes designs are based on the assumption of perfect channel state information at the receiver so as to make coherent decoding possible. However, accurate channel estimation requires a long training sequence that lowers spectral efficiency. Part of this dissertation focuses on the performance of HR-STTCM under non-coherent detection where there is imperfect channel state information and also in environment where the channel experiences rapid fading. Prior work on space-time codes with particular reference to STBC systems in multiuser environment has not adequately addressed the performance of the decoupled user signalto-noise ratio. Part of this thesis enumerates from a signal-to-noise ratio point of view the performance of the STBC systems in multiuser environment and also the performance of the HR-STTCM in such environment. The bit/frame error performance of space-time codes in fading channels can be evaluated using different approaches. The Chemoff upper-bound combined with the pair state generalized transfer function bound approach or the modified state transition diagram transfer function bound approach has been widely used in literature. However, although readily detennined, this bound can be too loose over nonnal signal-to-noise ranges of interest. Other approaches, based on the exact calculation of the pairwise error probabilities, are often too cumbersome. A simple exact numerical technique, for calculating, within any desired degree of accuracy, of the pairwise error probability of the HR-STTCM scheme over Rayleigh fading channel is proposed in this dissertation

Efficient space-frequency block coded pilot-aided channel estimation method for multiple-input-multiple-output orthogonal frequency division multiplexing systems over mobile frequency-selective fading channels

© 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.An iterative pilot-aided channel estimation technique for space-frequency block coded (SFBC) multiple-input multiple-output orthogonal frequency division multiplexing systems is proposed. Traditionally, when channel estimation techniques are utilised, the SFBC information signals are decoded one block at a time. In the proposed algorithm, multiple blocks of SFBC information signals are decoded simultaneously. The proposed channel estimation method can thus significantly reduce the amount of time required to decode information signals compared to similar channel estimation methods proposed in the literature. The proposed method is based on the maximum likelihood approach that offers linearity and simplicity of implementation. An expression for the pairwise error probability (PEP) is derived based on the estimated channel. The derived PEP is then used to determine the optimal power allocation for the pilot sequence. The performance of the proposed algorithm is demonstrated in high frequency selective channels, for different number of pilot symbols, using different modulation schemes. The algorithm is also tested under different levels of Doppler shift and for different number of transmit and receive antennas. The results show that the proposed scheme minimises the error margin between slow and high speed receivers compared to similar channel estimation methods in the literature.Peer reviewe

Distributed Space-Time Coding Based on Adjustable Code Matrices for Cooperative MIMO Relaying Systems

An adaptive distributed space-time coding (DSTC) scheme is proposed for two-hop cooperative MIMO networks. Linear minimum mean square error (MMSE) receive filters and adjustable code matrices are considered subject to a power constraint with an amplify-and-forward (AF) cooperation strategy. In the proposed adaptive DSTC scheme, an adjustable code matrix obtained by a feedback channel is employed to transform the space-time coded matrix at the relay node. The effects of the limited feedback and the feedback errors are assessed. Linear MMSE expressions are devised to compute the parameters of the adjustable code matrix and the linear receive filters. Stochastic gradient (SG) and least-squares (LS) algorithms are also developed with reduced computational complexity. An upper bound on the pairwise error probability analysis is derived and indicates the advantage of employing the adjustable code matrices at the relay nodes. An alternative optimization algorithm for the adaptive DSTC scheme is also derived in order to eliminate the need for the feedback. The algorithm provides a fully distributed scheme for the adaptive DSTC at the relay node based on the minimization of the error probability. Simulation results show that the proposed algorithms obtain significant performance gains as compared to existing DSTC schemes.Comment: 6 figure

Turbo Decoding and Detection for Wireless Applications

A historical perspective of turbo coding and turbo transceivers inspired by the generic turbo principles is provided, as it evolved from Shannon’s visionary predictions. More specifically, we commence by discussing the turbo principles, which have been shown to be capable of performing close to Shannon’s capacity limit. We continue by reviewing the classic maximum a posteriori probability decoder. These discussions are followed by studying the effect of a range of system parameters in a systematic fashion, in order to gauge their performance ramifications. In the second part of this treatise, we focus our attention on the family of iterative receivers designed for wireless communication systems, which were partly inspired by the invention of turbo codes. More specifically, the family of iteratively detected joint coding and modulation schemes, turbo equalization, concatenated spacetime and channel coding arrangements, as well as multi-user detection and three-stage multimedia systems are highlighted

Space-time coding techniques with bit-interleaved coded modulations for MIMO block-fading channels

The space-time bit-interleaved coded modulation (ST-BICM) is an efficient technique to obtain high diversity and coding gain on a block-fading MIMO channel. Its maximum-likelihood (ML) performance is computed under ideal interleaving conditions, which enables a global optimization taking into account channel coding. Thanks to a diversity upperbound derived from the Singleton bound, an appropriate choice of the time dimension of the space-time coding is possible, which maximizes diversity while minimizing complexity. Based on the analysis, an optimized interleaver and a set of linear precoders, called dispersive nucleo algebraic (DNA) precoders are proposed. The proposed precoders have good performance with respect to the state of the art and exist for any number of transmit antennas and any time dimension. With turbo codes, they exhibit a frame error rate which does not increase with frame length.Comment: Submitted to IEEE Trans. on Information Theory, Submission: January 2006 - First review: June 200

Delay Performance of MISO Wireless Communications

Ultra-reliable, low latency communications (URLLC) are currently attracting significant attention due to the emergence of mission-critical applications and device-centric communication. URLLC will entail a fundamental paradigm shift from throughput-oriented system design towards holistic designs for guaranteed and reliable end-to-end latency. A deep understanding of the delay performance of wireless networks is essential for efficient URLLC systems. In this paper, we investigate the network layer performance of multiple-input, single-output (MISO) systems under statistical delay constraints. We provide closed-form expressions for MISO diversity-oriented service process and derive probabilistic delay bounds using tools from stochastic network calculus. In particular, we analyze transmit beamforming with perfect and imperfect channel knowledge and compare it with orthogonal space-time codes and antenna selection. The effect of transmit power, number of antennas, and finite blocklength channel coding on the delay distribution is also investigated. Our higher layer performance results reveal key insights of MISO channels and provide useful guidelines for the design of ultra-reliable communication systems that can guarantee the stringent URLLC latency requirements.Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessibl