2,006 research outputs found
Spatial networks with wireless applications
Many networks have nodes located in physical space, with links more common
between closely spaced pairs of nodes. For example, the nodes could be wireless
devices and links communication channels in a wireless mesh network. We
describe recent work involving such networks, considering effects due to the
geometry (convex,non-convex, and fractal), node distribution,
distance-dependent link probability, mobility, directivity and interference.Comment: Review article- an amended version with a new title from the origina
On the Performance of Millimeter Wave-based RF-FSO Multi-hop and Mesh Networks
This paper studies the performance of multi-hop and mesh networks composed of
millimeter wave (MMW)-based radio frequency (RF) and free-space optical (FSO)
links. The results are obtained in cases with and without hybrid automatic
repeat request (HARQ). Taking the MMW characteristics of the RF links into
account, we derive closed-form expressions for the networks' outage probability
and ergodic achievable rates. We also evaluate the effect of various parameters
such as power amplifiers efficiency, number of antennas as well as different
coherence times of the RF and the FSO links on the system performance. Finally,
we determine the minimum number of the transmit antennas in the RF link such
that the same rate is supported in the RF- and the FSO-based hops. The results
show the efficiency of the RF-FSO setups in different conditions. Moreover,
HARQ can effectively improve the outage probability/energy efficiency, and
compensate for the effect of hardware impairments in RF-FSO networks. For
common parameter settings of the RF-FSO dual-hop networks, outage probability
of 10^{-4} and code rate of 3 nats-per-channel-use, the implementation of HARQ
with a maximum of 2 and 3 retransmissions reduces the required power, compared
to cases with open-loop communication, by 13 and 17 dB, respectively.Comment: Submitted to IEEE Transactions on Wireless Communication
Connectivity of confined 3D Networks with Anisotropically Radiating Nodes
Nodes in ad hoc networks with randomly oriented directional antenna patterns
typically have fewer short links and more long links which can bridge together
otherwise isolated subnetworks. This network feature is known to improve
overall connectivity in 2D random networks operating at low channel path loss.
To this end, we advance recently established results to obtain analytic
expressions for the mean degree of 3D networks for simple but practical
anisotropic gain profiles, including those of patch, dipole and end-fire array
antennas. Our analysis reveals that for homogeneous systems (i.e. neglecting
boundary effects) directional radiation patterns are superior to the isotropic
case only when the path loss exponent is less than the spatial dimension.
Moreover, we establish that ad hoc networks utilizing directional transmit and
isotropic receive antennas (or vice versa) are always sub-optimally connected
regardless of the environment path loss. We extend our analysis to investigate
boundary effects in inhomogeneous systems, and study the geometrical reasons
why directional radiating nodes are at a disadvantage to isotropic ones.
Finally, we discuss multi-directional gain patterns consisting of many equally
spaced lobes which could be used to mitigate boundary effects and improve
overall network connectivity.Comment: 12 pages, 10 figure
A Self-Organization Framework for Wireless Ad Hoc Networks as Small Worlds
Motivated by the benefits of small world networks, we propose a
self-organization framework for wireless ad hoc networks. We investigate the
use of directional beamforming for creating long-range short cuts between
nodes. Using simulation results for randomized beamforming as a guideline, we
identify crucial design issues for algorithm design. Our results show that,
while significant path length reduction is achievable, this is accompanied by
the problem of asymmetric paths between nodes. Subsequently, we propose a
distributed algorithm for small world creation that achieves path length
reduction while maintaining connectivity. We define a new centrality measure
that estimates the structural importance of nodes based on traffic flow in the
network, which is used to identify the optimum nodes for beamforming. We show,
using simulations, that this leads to significant reduction in path length
while maintaining connectivity.Comment: Submitted to IEEE Transactions on Vehicular Technolog
MAC Protocols for Wireless Mesh Networks with Multi-beam Antennas: A Survey
Multi-beam antenna technologies have provided lots of promising solutions to
many current challenges faced in wireless mesh networks. The antenna can
establish several beamformings simultaneously and initiate concurrent
transmissions or receptions using multiple beams, thereby increasing the
overall throughput of the network transmission. Multi-beam antenna has the
ability to increase the spatial reuse, extend the transmission range, improve
the transmission reliability, as well as save the power consumption.
Traditional Medium Access Control (MAC) protocols for wireless network largely
relied on the IEEE 802.11 Distributed Coordination Function(DCF) mechanism,
however, IEEE 802.11 DCF cannot take the advantages of these unique
capabilities provided by multi-beam antennas. This paper surveys the MAC
protocols for wireless mesh networks with multi-beam antennas. The paper first
discusses some basic information in designing multi-beam antenna system and MAC
protocols, and then presents the main challenges for the MAC protocols in
wireless mesh networks compared with the traditional MAC protocols. A
qualitative comparison of the existing MAC protocols is provided to highlight
their novel features, which provides a reference for designing the new MAC
protocols. To provide some insights on future research, several open issues of
MAC protocols are discussed for wireless mesh networks using multi-beam
antennas.Comment: 22 pages, 6 figures, Future of Information and Communication
Conference (FICC) 2019, https://doi.org/10.1007/978-3-030-12388-8_
WiLiTV: A Low-Cost Wireless Framework for Live TV Services
With the evolution of HDTV and Ultra HDTV, the bandwidth requirement for
IP-based TV content is rapidly increasing. Consumers demand uninterrupted
service with a high Quality of Experience (QoE). Service providers are
constantly trying to differentiate themselves by innovating new ways of
distributing content more efficiently with lower cost and higher penetration.
In this work, we propose a cost-efficient wireless framework (WiLiTV) for
delivering live TV services, consisting of a mix of wireless access
technologies (e.g. Satellite, WiFi and LTE overlay links). In the proposed
architecture, live TV content is injected into the network at a few residential
locations using satellite dishes. The content is then further distributed to
other homes using a house-to-house WiFi network or via an overlay LTE network.
Our problem is to construct an optimal TV distribution network with the minimum
number of satellite injection points, while preserving the highest QoE, for
different neighborhood densities. We evaluate the framework using realistic
time-varying demand patterns and a diverse set of home location data. Our study
demonstrates that the architecture requires 75 - 90% fewer satellite injection
points, compared to traditional architectures. Furthermore, we show that most
cost savings can be obtained using simple and practical relay routing
solutions
- …