Evolution of Test Programs Exploiting a FSM Processor Model

Microprocessor testing is becoming a challenging task, due to the increasing complexity of modern architectures. Nowadays, most architectures are tackled with a combination of scan chains and Software-Based Self-Test (SBST) methodologies. Among SBST techniques, evolutionary feedback-based ones prove effective in microprocessor testing: their main disadvantage, however, is the considerable time required to generate suitable test programs. A novel evolutionary-based approach, able to appreciably reduce the generation time, is presented. The proposed method exploits a high-level representation of the architecture under test and a dynamically built Finite State Machine (FSM) model to assess fault coverage without resorting to time-expensive simulations on low-level models. Experimental results, performed on an OpenRISC processor, show that the resulting test obtains a nearly complete fault coverage against the targeted fault mode

Self-Test Mechanisms for Automotive Multi-Processor System-on-Chips

L'abstract è presente nell'allegato / the abstract is in the attachmen

Enhancing Real-time Embedded Image Processing Robustness on Reconfigurable Devices for Critical Applications

Nowadays, image processing is increasingly used in several application fields, such as biomedical, aerospace, or automotive. Within these fields, image processing is used to serve both non-critical and critical tasks. As example, in automotive, cameras are becoming key sensors in increasing car safety, driving assistance and driving comfort. They have been employed for infotainment (non-critical), as well as for some driver assistance tasks (critical), such as Forward Collision Avoidance, Intelligent Speed Control, or Pedestrian Detection. The complexity of these algorithms brings a challenge in real-time image processing systems, requiring high computing capacity, usually not available in processors for embedded systems. Hardware acceleration is therefore crucial, and devices such as Field Programmable Gate Arrays (FPGAs) best fit the growing demand of computational capabilities. These devices can assist embedded processors by significantly speeding-up computationally intensive software algorithms. Moreover, critical applications introduce strict requirements not only from the real-time constraints, but also from the device reliability and algorithm robustness points of view. Technology scaling is highlighting reliability problems related to aging phenomena, and to the increasing sensitivity of digital devices to external radiation events that can cause transient or even permanent faults. These faults can lead to wrong information processed or, in the worst case, to a dangerous system failure. In this context, the reconfigurable nature of FPGA devices can be exploited to increase the system reliability and robustness by leveraging Dynamic Partial Reconfiguration features. The research work presented in this thesis focuses on the development of techniques for implementing efficient and robust real-time embedded image processing hardware accelerators and systems for mission-critical applications. Three main challenges have been faced and will be discussed, along with proposed solutions, throughout the thesis: (i) achieving real-time performances, (ii) enhancing algorithm robustness, and (iii) increasing overall system's dependability. In order to ensure real-time performances, efficient FPGA-based hardware accelerators implementing selected image processing algorithms have been developed. Functionalities offered by the target technology, and algorithm's characteristics have been constantly taken into account while designing such accelerators, in order to efficiently tailor algorithm's operations to available hardware resources. On the other hand, the key idea for increasing image processing algorithms' robustness is to introduce self-adaptivity features at algorithm level, in order to maintain constant, or improve, the quality of results for a wide range of input conditions, that are not always fully predictable at design-time (e.g., noise level variations). This has been accomplished by measuring at run-time some characteristics of the input images, and then tuning the algorithm parameters based on such estimations. Dynamic reconfiguration features of modern reconfigurable FPGA have been extensively exploited in order to integrate run-time adaptivity into the designed hardware accelerators. Tools and methodologies have been also developed in order to increase the overall system dependability during reconfiguration processes, thus providing safe run-time adaptation mechanisms. In addition, taking into account the target technology and the environments in which the developed hardware accelerators and systems may be employed, dependability issues have been analyzed, leading to the development of a platform for quickly assessing the reliability and characterizing the behavior of hardware accelerators implemented on reconfigurable FPGAs when they are affected by such faults

Exploiting frame coherence in real-time rendering for energy-efficient GPUs

The computation capabilities of mobile GPUs have greatly evolved in the last generations, allowing real-time rendering of realistic scenes. However, the desire for processing complex environments clashes with the battery-operated nature of smartphones, for which users expect long operating times per charge and a low-enough temperature to comfortably hold them. Consequently, improving the energy-efficiency of mobile GPUs is paramount to fulfill both performance and low-power goals. The work of the processors from within the GPU and their accesses to off-chip memory are the main sources of energy consumption in graphics workloads. Yet most of this energy is spent in redundant computations, as the frame rate required to produce animations results in a sequence of extremely similar images. The goal of this thesis is to improve the energy-efficiency of mobile GPUs by designing micro-architectural mechanisms that leverage frame coherence in order to reduce the redundant computations and memory accesses inherent in graphics applications. First, we focus on reducing redundant color computations. Mobile GPUs typically employ an architecture called Tile-Based Rendering, in which the screen is divided into tiles that are independently rendered in on-chip buffers. It is common that more than 80% of the tiles produce exactly the same output between consecutive frames. We propose Rendering Elimination (RE), a mechanism that accurately determines such occurrences by computing and storing signatures of the inputs of all the tiles in a frame. If the signatures of a tile across consecutive frames are the same, the colors computed in the preceding frame are reused, saving all computations and memory accesses associated to the rendering of the tile. We show that RE vastly outperforms related schemes found in the literature, achieving a reduction of energy consumption of 37% and execution time of 33% with minimal overheads. Next, we focus on reducing redundant computations of fragments that will eventually not be visible. In real-time rendering, objects are processed in the order they are submitted to the GPU, which usually causes that the results of previously-computed objects are overwritten by new objects that turn occlude them. Consequently, whether or not a particular object will be occluded is not known until the entire scene has been processed. Based on the fact that visibility tends to remain constant across consecutive frames, we propose Early Visibility Resolution (EVR), a mechanism that predicts visibility based on information obtained in the preceding frame. EVR first computes and stores the depth of the farthest visible point after rendering each tile. Whenever a tile is rendered in the following frame, primitives that are farther from the observer than the stored depth are predicted to be occluded, and processed after the ones predicted to be visible. Additionally, this visibility prediction scheme is used to improve Rendering Elimination’s equal tile detection capabilities by not adding primitives predicted to be occluded in the signature. With minor hardware costs, EVR is shown to provide a reduction of energy consumption of 43% and execution time of 39%. Finally, we focus on reducing computations in tiles with low spatial frequencies. GPUs produce pixel colors by sampling triangles once per pixel and performing computations on each sampling location. However, most screen regions do not include sufficient detail to require high sampling rates, leading to a significant amount of energy wasted computing the same color for neighboring pixels. Given that spatial frequencies are maintained across frames, we propose Dynamic Sampling Rate, a mechanism that analyzes the spatial frequencies of tiles and determines the best sampling rate for them, which is applied in the following frame. Results show that Dynamic Sampling Rate significantly reduces processor activity, yielding energy savings of 40% and execution time reductions of 35%.La capacitat de càlcul de les GPU mòbils ha augmentat en gran mesura en les darreres generacions, permetent el renderitzat de paisatges complexos en temps real. Nogensmenys, el desig de processar escenes cada vegada més realistes xoca amb el fet que aquests dispositius funcionen amb bateries, i els usuaris n’esperen llargues durades i una temperatura prou baixa com per a ser agafats còmodament. En conseqüència, millorar l’eficiència energètica de les GPU mòbils és essencial per a aconseguir els objectius de rendiment i baix consum. Els processadors de la GPU i els seus accessos a memòria són els principals consumidors d’energia en càrregues gràfiques, però molt d’aquest consum és malbaratat en càlculs redundants, ja que les animacions produïdes s¿aconsegueixen renderitzant una seqüència d’imatges molt similars. L’objectiu d’aquesta tesi és millorar l’eficiència energètica de les GPU mòbils mitjançant el disseny de mecanismes microarquitectònics que aprofitin la coherència entre imatges per a reduir els càlculs i accessos redundants inherents a les aplicacions gràfiques. Primerament, ens centrem en reduir càlculs redundants de colors. A les GPU mòbils, sovint s'empra una arquitectura anomenada Tile-Based Rendering, en què la pantalla es divideix en regions que es processen independentment dins del xip. És habitual que més del 80% de les regions de pantalla produeixin els mateixos colors entre imatges consecutives. Proposem Rendering Elimination (RE), un mecanisme que determina acuradament aquests casos computant una signatura de les entrades de totes les regions. Si les signatures de dues imatges són iguals, es reutilitzen els colors calculats a la imatge anterior, el que estalvia tots els càlculs i accessos a memòria de la regió. RE supera àmpliament propostes relacionades de la literatura, aconseguint una reducció del consum energètic del 37% i del temps d’execució del 33%. Seguidament, ens centrem en reduir càlculs redundants en fragments que eventualment no seran visibles. En aplicacions gràfiques, els objectes es processen en l’ordre en què son enviats a la GPU, el que sovint causa que resultats ja processats siguin sobreescrits per nous objectes que els oclouen. Per tant, no se sap si un objecte serà visible o no fins que tota l’escena ha estat processada. Fonamentats en el fet que la visibilitat tendeix a ser constant entre imatges, proposem Early Visibility Resolution (EVR), un mecanisme que prediu la visibilitat basat en informació obtinguda a la imatge anterior. EVR computa i emmagatzema la profunditat del punt visible més llunyà després de processar cada regió de pantalla. Quan es processa una regió a la imatge següent, es prediu que les primitives més llunyanes a el punt guardat seran ocloses i es processen després de les que es prediuen que seran visibles. Addicionalment, aquest esquema de predicció s’empra en millorar la detecció de regions redundants de RE al no afegir les primitives que es prediu que seran ocloses a les signatures. Amb un cost de maquinari mínim, EVR aconsegueix una millora del consum energètic del 43% i del temps d’execució del 39%. Finalment, ens centrem a reduir càlculs en regions de pantalla amb poca freqüència espacial. Les GPU actuals produeixen colors mostrejant els triangles una vegada per cada píxel i fent càlculs a cada localització mostrejada. Però la majoria de regions no tenen suficient detall per a necessitar altes freqüències de mostreig, el que implica un malbaratament d’energia en el càlcul del mateix color en píxels adjacents. Com les freqüències tendeixen a mantenir-se en el temps, proposem Dynamic Sampling Rate (DSR)¸ un mecanisme que analitza les freqüències de les regions una vegada han estat renderitzades i en determina la menor freqüència de mostreig a la que es poden processar, que s’aplica a la següent imatge..

Exploiting frame coherence in real-time rendering for energy-efficient GPUs

The computation capabilities of mobile GPUs have greatly evolved in the last generations, allowing real-time rendering of realistic scenes. However, the desire for processing complex environments clashes with the battery-operated nature of smartphones, for which users expect long operating times per charge and a low-enough temperature to comfortably hold them. Consequently, improving the energy-efficiency of mobile GPUs is paramount to fulfill both performance and low-power goals. The work of the processors from within the GPU and their accesses to off-chip memory are the main sources of energy consumption in graphics workloads. Yet most of this energy is spent in redundant computations, as the frame rate required to produce animations results in a sequence of extremely similar images. The goal of this thesis is to improve the energy-efficiency of mobile GPUs by designing micro-architectural mechanisms that leverage frame coherence in order to reduce the redundant computations and memory accesses inherent in graphics applications. First, we focus on reducing redundant color computations. Mobile GPUs typically employ an architecture called Tile-Based Rendering, in which the screen is divided into tiles that are independently rendered in on-chip buffers. It is common that more than 80% of the tiles produce exactly the same output between consecutive frames. We propose Rendering Elimination (RE), a mechanism that accurately determines such occurrences by computing and storing signatures of the inputs of all the tiles in a frame. If the signatures of a tile across consecutive frames are the same, the colors computed in the preceding frame are reused, saving all computations and memory accesses associated to the rendering of the tile. We show that RE vastly outperforms related schemes found in the literature, achieving a reduction of energy consumption of 37% and execution time of 33% with minimal overheads. Next, we focus on reducing redundant computations of fragments that will eventually not be visible. In real-time rendering, objects are processed in the order they are submitted to the GPU, which usually causes that the results of previously-computed objects are overwritten by new objects that turn occlude them. Consequently, whether or not a particular object will be occluded is not known until the entire scene has been processed. Based on the fact that visibility tends to remain constant across consecutive frames, we propose Early Visibility Resolution (EVR), a mechanism that predicts visibility based on information obtained in the preceding frame. EVR first computes and stores the depth of the farthest visible point after rendering each tile. Whenever a tile is rendered in the following frame, primitives that are farther from the observer than the stored depth are predicted to be occluded, and processed after the ones predicted to be visible. Additionally, this visibility prediction scheme is used to improve Rendering Elimination’s equal tile detection capabilities by not adding primitives predicted to be occluded in the signature. With minor hardware costs, EVR is shown to provide a reduction of energy consumption of 43% and execution time of 39%. Finally, we focus on reducing computations in tiles with low spatial frequencies. GPUs produce pixel colors by sampling triangles once per pixel and performing computations on each sampling location. However, most screen regions do not include sufficient detail to require high sampling rates, leading to a significant amount of energy wasted computing the same color for neighboring pixels. Given that spatial frequencies are maintained across frames, we propose Dynamic Sampling Rate, a mechanism that analyzes the spatial frequencies of tiles and determines the best sampling rate for them, which is applied in the following frame. Results show that Dynamic Sampling Rate significantly reduces processor activity, yielding energy savings of 40% and execution time reductions of 35%.La capacitat de càlcul de les GPU mòbils ha augmentat en gran mesura en les darreres generacions, permetent el renderitzat de paisatges complexos en temps real. Nogensmenys, el desig de processar escenes cada vegada més realistes xoca amb el fet que aquests dispositius funcionen amb bateries, i els usuaris n’esperen llargues durades i una temperatura prou baixa com per a ser agafats còmodament. En conseqüència, millorar l’eficiència energètica de les GPU mòbils és essencial per a aconseguir els objectius de rendiment i baix consum. Els processadors de la GPU i els seus accessos a memòria són els principals consumidors d’energia en càrregues gràfiques, però molt d’aquest consum és malbaratat en càlculs redundants, ja que les animacions produïdes s¿aconsegueixen renderitzant una seqüència d’imatges molt similars. L’objectiu d’aquesta tesi és millorar l’eficiència energètica de les GPU mòbils mitjançant el disseny de mecanismes microarquitectònics que aprofitin la coherència entre imatges per a reduir els càlculs i accessos redundants inherents a les aplicacions gràfiques. Primerament, ens centrem en reduir càlculs redundants de colors. A les GPU mòbils, sovint s'empra una arquitectura anomenada Tile-Based Rendering, en què la pantalla es divideix en regions que es processen independentment dins del xip. És habitual que més del 80% de les regions de pantalla produeixin els mateixos colors entre imatges consecutives. Proposem Rendering Elimination (RE), un mecanisme que determina acuradament aquests casos computant una signatura de les entrades de totes les regions. Si les signatures de dues imatges són iguals, es reutilitzen els colors calculats a la imatge anterior, el que estalvia tots els càlculs i accessos a memòria de la regió. RE supera àmpliament propostes relacionades de la literatura, aconseguint una reducció del consum energètic del 37% i del temps d’execució del 33%. Seguidament, ens centrem en reduir càlculs redundants en fragments que eventualment no seran visibles. En aplicacions gràfiques, els objectes es processen en l’ordre en què son enviats a la GPU, el que sovint causa que resultats ja processats siguin sobreescrits per nous objectes que els oclouen. Per tant, no se sap si un objecte serà visible o no fins que tota l’escena ha estat processada. Fonamentats en el fet que la visibilitat tendeix a ser constant entre imatges, proposem Early Visibility Resolution (EVR), un mecanisme que prediu la visibilitat basat en informació obtinguda a la imatge anterior. EVR computa i emmagatzema la profunditat del punt visible més llunyà després de processar cada regió de pantalla. Quan es processa una regió a la imatge següent, es prediu que les primitives més llunyanes a el punt guardat seran ocloses i es processen després de les que es prediuen que seran visibles. Addicionalment, aquest esquema de predicció s’empra en millorar la detecció de regions redundants de RE al no afegir les primitives que es prediu que seran ocloses a les signatures. Amb un cost de maquinari mínim, EVR aconsegueix una millora del consum energètic del 43% i del temps d’execució del 39%. Finalment, ens centrem a reduir càlculs en regions de pantalla amb poca freqüència espacial. Les GPU actuals produeixen colors mostrejant els triangles una vegada per cada píxel i fent càlculs a cada localització mostrejada. Però la majoria de regions no tenen suficient detall per a necessitar altes freqüències de mostreig, el que implica un malbaratament d’energia en el càlcul del mateix color en píxels adjacents. Com les freqüències tendeixen a mantenir-se en el temps, proposem Dynamic Sampling Rate (DSR)¸ un mecanisme que analitza les freqüències de les regions una vegada han estat renderitzades i en determina la menor freqüència de mostreig a la que es poden processar, que s’aplica a la següent imatge...Postprint (published version