925 research outputs found
Positioning of multiple unmanned aerial vehicle base stations in future wireless network
Abstract. Unmanned aerial vehicle (UAV) base stations (BSs) can be a reliable and efficient alternative to full fill the coverage and capacity requirements when the backbone network fails to provide the requirements during temporary events and after disasters. In this thesis, we consider three-dimensional deployment of multiple UAV-BSs in a millimeter-Wave network. Initially, we defined a set of locations for a UAV-BS to be deployed inside a cell, then possible combinations of predefined locations for multiple UAV-BSs are determined and assumed that users have fixed locations. We developed a novel algorithm to find the feasible positions from the predefined locations of multiple UAVs subject to a signal-to-interference-plus-noise ratio (SINR) constraint of every associated user to guarantees the quality-of-service (QoS), UAV-BS’s limited hovering altitude constraint and restricted operating zone because of regulation policies. Further, we take into consideration the millimeter-wave transmission and multi-antenna techniques to generate directional beams to serve the users in a cell.
We cast the positioning problem as an ℓ₀ minimization problem. This is a combinatorial, NP-hard, and finding the optimum solution is not tractable by exhaustive search. Therefore, we focused on the sub-optimal algorithm to find a feasible solution. We approximate the ℓ₀ minimization problem as non-combinatorial ℓ₁-norm problem. The simulation results reveal that, with millimeter-wave transmission the positioning of the UAV-BS while satisfying the constrains is feasible. Further, the analysis shows that the proposed algorithm achieves a near-optimal location to deploy multiple UVABS simultaneously
Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey
In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner
Five Facets of 6G: Research Challenges and Opportunities
Whilst the fifth-generation (5G) systems are being rolled out across the
globe, researchers have turned their attention to the exploration of radical
next-generation solutions. At this early evolutionary stage we survey five main
research facets of this field, namely {\em Facet~1: next-generation
architectures, spectrum and services, Facet~2: next-generation networking,
Facet~3: Internet of Things (IoT), Facet~4: wireless positioning and sensing,
as well as Facet~5: applications of deep learning in 6G networks.} In this
paper, we have provided a critical appraisal of the literature of promising
techniques ranging from the associated architectures, networking, applications
as well as designs. We have portrayed a plethora of heterogeneous architectures
relying on cooperative hybrid networks supported by diverse access and
transmission mechanisms. The vulnerabilities of these techniques are also
addressed and carefully considered for highlighting the most of promising
future research directions. Additionally, we have listed a rich suite of
learning-driven optimization techniques. We conclude by observing the
evolutionary paradigm-shift that has taken place from pure single-component
bandwidth-efficiency, power-efficiency or delay-optimization towards
multi-component designs, as exemplified by the twin-component ultra-reliable
low-latency mode of the 5G system. We advocate a further evolutionary step
towards multi-component Pareto optimization, which requires the exploration of
the entire Pareto front of all optiomal solutions, where none of the components
of the objective function may be improved without degrading at least one of the
other components
Radio over fiber: An alternative broadband network technology for Iot
Wireless broadband access networks have been positioning themselves as a good solution for manufacturers and users of IoT (internet of things) devices, due mainly to the high data transfer rate required over terminal devices without restriction of information format. In this work, a review of two Radio over Fiber strategies is presented. Both have excellent performance and even offer the possibility to extend wireless area coverage where mobile networks do not reach or the 802.11 network presents issues. Radio Frequency over Fiber (RFoF) and intermediate Frequency over Fiber (IFoF) are two transmission strategies compatible with the required new broadband services and both play a key role in the design of the next generation integrated optical–wireless networks, such as 5G and Satcom networks, including on RAU (Remote Antenna Unit) new functionalities to improve their physical dimensions, employing a microelectronic layout over nanometric technologies
- …