346 research outputs found

    Evaluating several implementations for the AS Minimum Bandwidth Egress Link Scheduler

    Get PDF
    Abstract-The relevance of the provision of QoS is taken into account in the definition of the new network technologies like for example Advanced Switching (AS). AS is a new fabricinterconnect technology that further enhances the capabilities of PCI Express, which is the next PCI generation. In this paper we discuss the aspects that must be considered for implementing a specific mechanism for the AS minimum bandwidth egress link scheduler, or just MinBW scheduler. We also propose several implementations for this scheduler, analyze their computational complexity, and compare their performance by simulation. The main differentiating aspect from other interconnection technologies that must be taken into account when implementing the AS MinBW scheduler is that both the link-level flow control and the scheduling are made at a Virtual Channel (VC) level. This means that the scheduler must have the ability to enable or disable the selection of a given VC based on the flow control information

    A Study of Application-awareness in Software-defined Data Center Networks

    Get PDF
    A data center (DC) has been a fundamental infrastructure for academia and industry for many years. Applications in DC have diverse requirements on communication. There are huge demands on data center network (DCN) control frameworks (CFs) for coordinating communication traffic. Simultaneously satisfying all demands is difficult and inefficient using existing traditional network devices and protocols. Recently, the agile software-defined Networking (SDN) is introduced to DCN for speeding up the development of the DCNCF. Application-awareness preserves the application semantics including the collective goals of communications. Previous works have illustrated that application-aware DCNCFs can much more efficiently allocate network resources by explicitly considering applications needs. A transfer application task level application-aware software-defined DCNCF (SDDCNCF) for OpenFlow software-defined DCN (SDDCN) for big data exchange is designed. The SDDCNCF achieves application-aware load balancing, short average transfer application task completion time, and high link utilization. The SDDCNCF is immediately deployable on SDDCN which consists of OpenFlow 1.3 switches. The Big Data Research Integration with Cyberinfrastructure for LSU (BIC-LSU) project adopts the SDDCNCF to construct a 40Gb/s high-speed storage area network to efficiently transfer big data for accelerating big data related researches at Louisiana State University. On the basis of the success of BIC-LSU, a coflow level application-aware SD- DCNCF for OpenFlow-based storage area networks, MinCOF, is designed. MinCOF incorporates all desirable features of existing coflow scheduling and routing frame- works and requires minimal changes on hosts. To avoid the architectural limitation of the OpenFlow SDN implementation, a coflow level application-aware SDDCNCF using fast packet processing library, Coflourish, is designed. Coflourish exploits congestion feedback assistances from SDN switches in the DCN to schedule coflows and can smoothly co-exist with arbitrary applications in a shared DCN. Coflourish is implemented using the fast packet processing library on an SDN switch, Open vSwitch with DPDK. Simulation and experiment results indicate that Coflourish effectively shortens average application completion time

    Network emulation focusing on QoS-Oriented satellite communication

    Get PDF
    This chapter proposes network emulation basics and a complete case study of QoS-oriented Satellite Communication

    Performance Evaluation of MPLS in a Virtualized Service Provider Core (with/without Class of Service)

    Get PDF
    The last decade has witnessed a major change in the types of traffic scaling the Internet. With the development of real-time applications several challenges were faced within traditional IP networks. Some of these challenges are delay, increased costs faced by the service provider and customer, limited scalability, separate infrastructure costs and high administrative overheads to manage large networks etc. To combat these challenges, researchers have steered towards finding alternate solutions. Over the recent years, we have seen an introduction of a number of virtualized platforms and solutions being offered in the networking industry. Virtual load balancers, virtual firewalls, virtual routers, virtual intrusion detection and preventions systems are just a few examples within the Network Function Virtualization world! Service Providers are trying to find solutions where they could reduce operational expenses while at the same time meet the growing bandwidth demands of their customers. The main aim of this thesis is to evaluate the performance of voice, data and video traffic in a virtualized service provider core. Observations are made on how these traffic types perform on congested vs uncongested links and how Quality of Service treats traffic in a virtualized Service Provider Core using Round Trip Time as a performance metric. This thesis also tries to find if resiliency features such as Fast Reroute provide an additional advantage in failover scenarios within virtualized service provider cores. Juniper Networks vSRX are used to replicate virtual routers in a virtualized service provider core. Twenty-Four tests are carried out to gain a better understanding of how real-time applications and resiliency methods perform in virtualized networks. It is observed that a trade-off exists when introducing QoS on congested primary and secondary label switched paths. What can be observed thru the graphs is having Quality of Service enabled drops more packets however gives us the advantage of lower Round Trip Time for in-profile traffic. On the hand, having Quality of Service disabled, permits more traffic but leads to bandwidth contention between the three traffic classes leading to higher Round-Trip Times. The true benefit of QoS is seen in traffic congestion scenarios. The test bed built in this thesis, shows us that Fast Reroute does not add a significant benefit to aid in the reduction of packet loss during failover scenarios between primary and secondary paths. However, in certain scenarios fast reroute does seem to reduce packet loss specifically for data traffic

    Modelação e simulação de equipamentos de rede para Indústria 4.0

    Get PDF
    Currently, the industrial sector has increasingly opted for digital technologies in order to automate all its processes. This development comes from notions like Industry 4.0 that redefines the way these systems are designed. Structurally, all the components of these systems are connected in a complex network known as the Industrial Internet of Things. Certain requirements arise from this concept regarding industrial communication networks. Among them, the need to ensure real-time communications, as well as support for dynamic resource management, are extremely relevant. Several research lines pursued to develop network technologies capable of meeting such requirements. One of these protocols is the Hard Real-Time Ethernet Switch (HaRTES), an Ethernet switch with support for real-time communications and dynamic resource management, requirements imposed by Industry 4.0. The process of designing and implementing industrial networks can, however, be quite time consuming and costly. These aspects impose limitations on testing large networks, whose level of complexity is higher and requires the usage of more hardware. The utilization of network simulators stems from the necessity to overcome such restrictions and provide tools to facilitate the development of new protocols and evaluation of communications networks. In the scope of this dissertation a HaRTES switch model was developed in the OMNeT++ simulation environment. In order to demonstrate a solution that can be employed in industrial real-time networks, this dissertation presents the fundamental aspects of the implemented model as well as a set of experiments that compare it with an existing laboratory prototype, with the objective of validating its implementation.Atualmente o setor industrial tem vindo cada vez mais a optar por tecnologias digitais de forma a automatizar todos os seus processos. Este desenvolvimento surge de noções como Indústria 4.0, que redefine o modo de como estes sistemas são projetados. Estruturalmente, todos os componentes destes sistemas encontram-se conectados numa rede complexa conhecida como Internet Industrial das Coisas. Certos requisitos advêm deste conceito, no que toca às redes de comunicação industriais, entre os quais se destacam a necessidade de garantir comunicações tempo-real bem como suporte a uma gestão dinâmica dos recursos, os quais são de extrema importância. Várias linhas de investigação procuraram desenvolver tecnologias de rede capazes de satisfazer tais exigências. Uma destas soluções é o "Hard Real-Time Ethernet Switch" (HaRTES), um switch Ethernet com suporte a comunicações de tempo-real e gestão dinâmica de Qualidade-de-Serviço (QoS), requisitos impostos pela Indústria 4.0. O processo de projeto e implementação de redes industriais pode, no entanto, ser bastante moroso e dispendioso. Tais aspetos impõem limitações no teste de redes de largas dimensões, cujo nível de complexidade é mais elevado e requer o uso de mais hardware. Os simuladores de redes permitem atenuar o impacto de tais limitações, disponibilizando ferramentas que facilitam o desenvolvimento de novos protocolos e a avaliação de redes de comunicações. No âmbito desta dissertação desenvolveu-se um modelo do switch HaRTES no ambiente de simulação OMNeT++. Com um objetivo de demonstrar uma solução que possa ser utilizada em redes de tempo-real industriais, esta dissertação apresenta os aspetos fundamentais do modelo implementado bem como um conjunto de experiências que o comparam com um protótipo laboratorial já existente, no âmbito da sua validação.Mestrado em Engenharia Eletrónica e Telecomunicaçõe

    Hybrid switching : converging packet and TDM flows in a single platform

    Get PDF
    Optical fibers have brought fast and reliable data transmission to today’s network. The immense fiber build-out over the last few years has generated a wide array of new access technologies, transport and network protocols, and next-generation services in the Local Area Network (LAN), Metropolitan Area Network (MAN), and Wide Area Network (WAN). All these different technologies, protocols, and services were introduced to address particular telecommunication needs. To remain competitive in the market, the service providers must offer most of these services, while maintaining their own profitability. However, offering a large variety of equipment, protocols, and services posses a big challenge for service carriers because it requires a huge investment in different technology platforms, lots of training of staff, and the management of all these networks. In today’s network, service providers use SONET (Synchronous Optical NETwork) as a basic TDM (Time Division Multiplexing) transport network. SONET was primarily designed to carry voice traffic from telephone networks. However, with the explosion of traffic in the Internet, the same SONET based TDM network is optimized to support increasing demand for packet based Internet network services (data, voice, video, teleconference etc.) at access networks and LANs. Therefore the service providers need to support their Internet Protocol (IP) infrastructure as well as in the legacy telephony infrastructure. Supporting both TDM and packet services in the present condition needs multilayer operations which is complex, expensive, and difficult to manage. A hybrid switch is a novel architecture that combines packets (IP) and TDM switching in a unified access platform and provides seamless integration of access networks and LANs with MAN/WAN networks. The ability to fully integrate these two capabilities in a single chassis will allow service providers to deploy a more cost effective and flexible architecture that can support a variety of different services. This thesis develops a hybrid switch which is capable of offering bundled services for TDM switching and packet routing. This is done by dividing the switch’s bandwidth into VT1.5 (Virtual Tributary -1.5) channels and providing SONET based signaling for routing the data and controlling the switch’s resources. The switch is a TDM based architecture which allows each switch’s port to be independently configured for any mixture of packet and TDM traffic, including 100% packet and 100% TDM. This switch allows service providers to simplify their edge networks by consolidating the number of separate boxes needed to provide fast and reliable access. This switch also reduces the number of network management systems needed, and decreases the resources needed to install, provision and maintain the network because of its ability to “collapse” two network layers into one platform. The scope of this thesis includes system architecture, logic implementation, and verification testing, and performance evaluation of the hybrid switch. The architecture consists of ingress/egress ports, an arbiter and a crossbar. Data from ingress ports is carried to the egress ports via VT1.5 channels which are switched at the cross point of the crossbar. The crossbar setup and channel assignments at ingress port are done by the arbiter. The design was tested by simulation and the hardware cost was estimated. The performance results showed that the switch is non-blocking, provide differentiated service, and has an overall effective throughput of 80%. This result is a significant step towards the goal of building a switch that can support multiprotocol and provide different network capabilities into one platform. The long-term goal of this project is to develop a prototype of the hybrid switch with broadband capability

    Implementation and Performance Evaluation of an NGN prototype using WiMax as an Access Technology

    Get PDF
    Telecommunications networks have evolved to IP-based networks, commonly known as Next Generation Networks (NGN). The biggest challenge in providing high quality realtime multimedia applications is achieving a Quality of Service (QoS) consistent with user expectations. One of the key additional factors affecting QoS is the existence of different QoS mechanisms on the heterogeneous technologies used on NGN platforms. This research investigates the techniques used to achieve consistent QoS on network technologies that use different QoS techniques. Numerous proposals for solving the end-to-end QoS problem in IP networks have adopted policy-based management, use of signalling protocols for communicating applications QoS requirements across different Network Elements and QoS provisioning in Network Elements. Such solutions are dependent on the use of traffic classification and knowledge of the QoS requirements of applications and services on the networks. This research identifies the practical difficulties involved in meeting the QoS requirements of network traffic between WiMax and an IP core network. In the work, a solution based on the concept of class-of-service mapping is proposed. In the proposed solution, QoS is implemented on the two networks and the concept of class-of-service mapping is used to integrate the two QoS systems. This essentially provides consistent QoS to applications as they traverse the two network domains and hence meet end-user QoS expectations. The work is evaluated through a NGN prototype to determine the capabilities of the networks to deliver real-time media that meets user expectations
    corecore