Proceedings, MSVSCC 2016

Proceedings of the 10th Annual Modeling, Simulation & Visualization Student Capstone Conference held on April 14, 2016 at VMASC in Suffolk, Virginia

Computer Science & Technology Series : XVIII Argentine Congress of Computer Science. Selected papers

CACIC’12 was the eighteenth Congress in the CACIC series. It was organized by the School of Computer Science and Engineering at the Universidad Nacional del Sur. The Congress included 13 Workshops with 178 accepted papers, 5 Conferences, 2 invited tutorials, different meetings related with Computer Science Education (Professors, PhD students, Curricula) and an International School with 5 courses. CACIC 2012 was organized following the traditional Congress format, with 13 Workshops covering a diversity of dimensions of Computer Science Research. Each topic was supervised by a committee of 3-5 chairs of different Universities. The call for papers attracted a total of 302 submissions. An average of 2.5 review reports were collected for each paper, for a grand total of 752 review reports that involved about 410 different reviewers. A total of 178 full papers, involving 496 authors and 83 Universities, were accepted and 27 of them were selected for this book.Red de Universidades con Carreras en Informática (RedUNCI

Performance Comparison of Projective Elliptic-curve Point Multiplication in 64-bit x86 Runtime Environment

For over two decades, mathematicians and cryptologists have evaluated and presented the theoretical performance of Elliptic-curve scalar point-multiplication in projective geometry. Because computation in projective domain is composed of a wide array of formulations and computing optimizations, there is not a comprehensive performance comparison of point-multiplication using projective transformation available to verify its realistic efficiency in 64-bit x86 computing platforms. Today, research on explicit mathematical formulations in projective domain continues to excel by seeking higher computational efficiency and ease of realization. An explicit performance evaluation will help implementers choose better implementation methods and improve Elliptic-curve scalar point-multiplication. This paper was founded on the practical solution that obtaining realistic performance figures should be based on more precise computational cost metrics and specific computing platforms. As part of that solution, an empirical performance benchmark comparison between two approaches implementing projective Elliptic-curve scalar point-multiplication will be presented to provide the selection of, and subsequently ways to improve scalar point-multiplication technology executing in a 64-bit x86 runtime environment

NASA Tech Briefs, October 2000

Topics include: special coverage sections on CAD, CAE, and PDM, and, Composites and Plastics, and sections on electronic components and systems, software, test and measurement, mechanics, manufacturing/fabrication, physical sciences, information sciences, book and reports, and special sections of Electronics Tech Briefs and Motion Control Tech Brief

NASA Tech Briefs, November 2000

Topics covered include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Test and Measurement; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Data Acquisition

Multiphase flow modelling for enhanced oil and gas drilling and production

From the exploration to the abandonment of an oil and gas discovery, operators and engineers are constantly faced with the challenge of achieving the best commercial potential of oil fields. Although the petroleum engineering community has significantly contributed towards maximising the potential of discovered prospects, the approach adopted so far has been compartmentalised with little (heuristics-based) or no quality integration. The highly interconnected nature of the decision factors affecting the management of any field requires increased implementation of Computer-Aided Process Engineering (CAPE) methods, thus presenting a task for which chemical engineers have the background to make useful contributions. Drilling and production are the two primary challenging operations of oilfield activities, which span through different time horizons with both fast and slow-paced dynamics. These attributes of these systems make the application of modelling, simulation, and optimisation tasks difficult. This PhD project aims to improve field planning and development decisions from a Process Systems Engineering (PSE) perspective via numerical (fluid dynamics) simulations and modelbased deterministic optimisation of drilling and production operations, respectively. Also demonstrated in this work is the importance of deterministic optimisation as a reliable alternative to classical heuristic methods. From a drilling operation perspective, this project focuses on the application of Computational Fluid Dynamics (CFD) as a tool to understand the intricacies of cuttings transport (during wellbore cleaning) with drilling fluids of non-Newtonian rheology. Simulations of two-phase solid-liquid flows in an annular domain are carried out, with a detailed analysis on the impact of several drilling parameters (drill pipe eccentricity, inclination angle, drill pipe rotation, bit penetration rate, fluid rheology, and particle properties) on the cuttings concentration, pressure drop profiles, axial fluid, and solid velocities. The influence of the flow regime (laminar and turbulent) on cuttings transport efficiency is also examined using the Eulerian-Eulerian and Lagrangian-Eulerian modelling methods. With experimentally validated simulations, this aspect of the PhD project provides new understanding on the interdependence of these parameters; thus facilitating industrial wellbore cleaning operations. The second part of this project applies mathematical optimisation techniques via reduced-order modelling strategies for the enhancement of petroleum recovery under complex constraints that characterise production operations. The motivation for this aspect of the project stems from the observation that previous PSE-based contributions aimed at enhancing field profitability, often apply over-simplifications of the actual process or neglect some key performance indices due to problem complexity. However, this project focuses on a more detailed computational integration and optimisation of the models describing the whole field development process from the reservoir to the surface facilities to ensure optimal field operations. Nonlinear Programs (NLPs), Mixed-Integer Linear Programs (MILPs), and Mixed-Integer Nonlinear Programs (MINLPs) are formulated for this purpose and solved using high-fidelity simulators and algorithms in open-source and commercial solvers. Compared to previous studies, more flow physics are incorporated and rapid computations obtained, thus enabling real-time decision support for enhanced production in the oil and gas industry

Monolithic electronic-photonic integration in state-of-the-art CMOS processes

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Cataloged from student submitted PDF version of thesis.Includes bibliographical references (p. 388-407).As silicon CMOS transistors have scaled, increasing the density and energy efficiency of computation on a single chip, the off-chip communication link to memory has emerged as the major bottleneck within modern processors. Photonic devices promise to break this bottleneck with superior bandwidth-density and energy-efficiency. Initial work by many research groups to adapt photonic device designs to a silicon-based material platform demonstrated suitable independent performance for such links. However, electronic-photonic integration attempts to date have been limited by the high cost and complexity associated with modifying CMOS platforms suitable for modern high-performance computing applications. In this work, we instead utilize existing state-of-the-art electronic CMOS processes to fabricate integrated photonics by: modifying designs to match the existing process; preparing a design-rule compliant layout within industry-standard CAD tools; and locally-removing the handle silicon substrate in the photonic region through post-processing. This effort has resulted in the fabrication of seven test chips from two major foundries in 28, 45, 65 and 90 nm CMOS processes. Of these efforts, a single die fabricated through a widely available 45nm SOI-CMOS mask-share foundry with integrated waveguides with 3.7 dB/cm propagation loss alongside unmodified electronics with less than 5 ps inverter stage delay serves as a proof-of-concept for this approach. Demonstrated photonic devices include high-extinction carrier-injection modulators, 8-channel wavelength division multiplexing filter banks and low-efficiency silicon germanium photodetectors. Simultaneous electronic-photonic functionality is verified by recording a 600 Mb/s eye diagram from a resonant modulator driven by integrated digital circuits. Initial work towards photonic device integration within the peripheral CMOS flow of a memory process that has resulted in polysilicon waveguide propagation losses of 6.4 dB/cm will also be presented.by Jason S. Orcutt.Ph.D

XXIII Congreso Argentino de Ciencias de la Computación - CACIC 2017 : Libro de actas

Trabajos presentados en el XXIII Congreso Argentino de Ciencias de la Computación (CACIC), celebrado en la ciudad de La Plata los días 9 al 13 de octubre de 2017, organizado por la Red de Universidades con Carreras en Informática (RedUNCI) y la Facultad de Informática de la Universidad Nacional de La Plata (UNLP).Red de Universidades con Carreras en Informática (RedUNCI