Torii: Multipath Distributed Ethernet Fabric Protocol for Data Centers with Zero-Loss Path Repair

This paper describes and evaluates Torii, a layer-two data center network fabric protocol. The main features of Torii are being fully distributed, scalable, fault-tolerant and with automatic setup. Torii is based on multiple, tree-based, topological MAC addresses that are used for table-free forwarding over multiple equal-cost paths, and it is capable of rerouting frames around failed links on the fly without needing a central fabric manager for any function. To the best of our knowledge, it is the first protocol that does not require the exchange of periodic messages to work under normal conditions and to recover from link failures, as Torii exchanges messages just once. Moreover, another important characteristic of Torii is that it is compatible with a wide range of data center topologies. Simulation results show an excellent distribution of traffic load and latencies, similar to shortest path protocols

Torii: Multipath Distributed Ethernet Fabric Protocol for Data Centers with Zero-Loss Path Repair

This paper describes and evaluates Torii, a layer-two data center network fabric protocol. The main features of Torii are being fully distributed, scalable, fault-tolerant and with automatic setup. Torii is based on multiple, tree-based, topological MAC addresses that are used for table-free forwarding over multiple equal-cost paths, and it is capable of rerouting frames around failed links on the fly without needing a central fabric manager for any function. To the best of our knowledge, it is the first protocol that does not require the exchange of periodic messages to work under normal conditions and to recover from link failures, as Torii exchanges messages just once. Moreover, another important characteristic of Torii is that it is compatible with a wide range of data center topologies. Simulation results show an excellent distribution of traffic load and latencies, similar to shortest path protocols

Integration of unidirectional technologies into wireless back-haul architecture

This thesis was submitted for the degree of Docter of Philosophy and awarded by Brunel University.Back-haul infrastructures of today's wireless operators must support the triple-play services demanded by the market or regulatory bodies. To cope with increasing capacity demand, the EU FP7 project CARMEN has developed a cost-effective heterogeneous multi-radio wireless back-haul architecture, which may also leverage the native multicast capabilities of broadcast technologies such as DVB-T to off-load high-bandwidth broadcast content delivery. However, the integration of such unidirectional technologies into a packet-switched architecture requires careful considerations. The contribution of this thesis is the investigation, design and evaluation of protocols and mechanisms facilitating the integration of such unidirectional technologies into the wireless back-haul architecture so that they can be configured and utilized by the spectrum and capacity optimization modules. This integration mainly concerns the control plane and, in particular, the aspects related to resource and capability descriptions, neighborhood, link and Multi Protocol Label Switching (MPLS) Label-Switched Path (LSP) monitoring, unicast and multicast LSP signalling as well as topology forming and maintenance. During the course of this study we have analyzed the problem space, proposed solutions to the resulting research questions and evaluated our approach. Our results show that the now Unidirectional Technology (UDT)-aware architecture can readily consider Unidirectional Technologies (UDTs) to distribute, for example, broadcast content

Architectures for the Future Networks and the Next Generation Internet: A Survey

Networking research funding agencies in the USA, Europe, Japan, and other countries are encouraging research on revolutionary networking architectures that may or may not be bound by the restrictions of the current TCP/IP based Internet. We present a comprehensive survey of such research projects and activities. The topics covered include various testbeds for experimentations for new architectures, new security mechanisms, content delivery mechanisms, management and control frameworks, service architectures, and routing mechanisms. Delay/Disruption tolerant networks, which allow communications even when complete end-to-end path is not available, are also discussed

Optimization of BGP Convergence and Prefix Security in IP/MPLS Networks

Multi-Protocol Label Switching-based networks are the backbone of the operation of the Internet, that communicates through the use of the Border Gateway Protocol which connects distinct networks, referred to as Autonomous Systems, together. As the technology matures, so does the challenges caused by the extreme growth rate of the Internet. The amount of BGP prefixes required to facilitate such an increase in connectivity introduces multiple new critical issues, such as with the scalability and the security of the aforementioned Border Gateway Protocol. Illustration of an implementation of an IP/MPLS core transmission network is formed through the introduction of the four main pillars of an Autonomous System: Multi-Protocol Label Switching, Border Gateway Protocol, Open Shortest Path First and the Resource Reservation Protocol. The symbiosis of these technologies is used to introduce the practicalities of operating an IP/MPLS-based ISP network with traffic engineering and fault-resilience at heart. The first research objective of this thesis is to determine whether the deployment of a new BGP feature, which is referred to as BGP Prefix Independent Convergence (PIC), within AS16086 would be a worthwhile endeavour. This BGP extension aims to reduce the convergence delay of BGP Prefixes inside of an IP/MPLS Core Transmission Network, thus improving the networks resilience against faults. Simultaneously, the second research objective was to research the available mechanisms considering the protection of BGP Prefixes, such as with the implementation of the Resource Public Key Infrastructure and the Artemis BGP Monitor for proactive and reactive security of BGP prefixes within AS16086. The future prospective deployment of BGPsec is discussed to form an outlook to the future of IP/MPLS network design. As the trust-based nature of BGP as a protocol has become a distinct vulnerability, thus necessitating the use of various technologies to secure the communications between the Autonomous Systems that form the network to end all networks, the Internet

Policy Conflict Management in Distributed SDN Environments

abstract: The ease of programmability in Software-Defined Networking (SDN) makes it a great platform for implementation of various initiatives that involve application deployment, dynamic topology changes, and decentralized network management in a multi-tenant data center environment. However, implementing security solutions in such an environment is fraught with policy conflicts and consistency issues with the hardness of this problem being affected by the distribution scheme for the SDN controllers. In this dissertation, a formalism for flow rule conflicts in SDN environments is introduced. This formalism is realized in Brew, a security policy analysis framework implemented on an OpenDaylight SDN controller. Brew has comprehensive conflict detection and resolution modules to ensure that no two flow rules in a distributed SDN-based cloud environment have conflicts at any layer; thereby assuring consistent conflict-free security policy implementation and preventing information leakage. Techniques for global prioritization of flow rules in a decentralized environment are presented, using which all SDN flow rule conflicts are recognized and classified. Strategies for unassisted resolution of these conflicts are also detailed. Alternately, if administrator input is desired to resolve conflicts, a novel visualization scheme is implemented to help the administrators view the conflicts in an aesthetic manner. The correctness, feasibility and scalability of the Brew proof-of-concept prototype is demonstrated. Flow rule conflict avoidance using a buddy address space management technique is studied as an alternate to conflict detection and resolution in highly dynamic cloud systems attempting to implement an SDN-based Moving Target Defense (MTD) countermeasures.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Měření Triple play služeb v hybridní síti

The master's thesis deals with a project regarding the implementation, design and the quality of IPTV, VoIP and Data services within the Triple Play services. In heterostructural networks made up of GEPON and xDSL technologies. Different lengths of the optical and metallic paths were used for the measurements. The first part of the thesis is theoretically analyzed the development and trend of optical and metallic networks. The second part deals with the measurement of typical optical and metallic parameters on the constructed experimental network, where its integrity was tested. Another part of the thesis is the evaluation of Triple play results, regarding the test where the network was variously tasked/burdened with data traffic and evaluated according to defined standards. The last part is concerned with the Optiwave Software simulation environment.Diplomová práce se zabývá návrhem, realizací a kvalitou služeb IPTV, VoIP a Data v rámci Triple play služeb v heterostrukturní sítí tvořené GEPON a xDSL technologiemi. Pro měření byli využity různé délky optické a metalické trasy. První části diplomové práce je teoreticky rozebrán vývoj a trend optických a metalických sítí. Druhá část se zaměřuje na měření typických optických a metalických parametrů na vybudované experimentální síti, kde byla následně testována její integrita. Dalším bodem práce je vyhodnocení výsledků Triple play, kde síť je různě zatěžována datovým provozem a následně vyhodnocována podle definovaných norem. Závěr práce je věnovaný simulačnímu prostředí Optiwave.440 - Katedra telekomunikační technikyvýborn

PLANR.: Planar Learning Autonomous Navigation Robot

PLANR is a self-contained robot capable of mapping a space and generating 2D floor plans of a building while identifying objects of interest. It runs Robot Operating System (ROS) and houses four main hardware components. An Arduino Mega board handles the navigation, while an NVIDIA Jetson TX2, holds most of the processing power and runs ROS. An Orbbec Astra Pro stereoscopic camera is used for recognition of doors, windows and outlets and the RPLiDAR A3 laser scanner is able to give depth for wall detection and dimension measurements. The robot is intended to operate autonomously and without constant human monitoring or intervention. The user is responsible for booting up the robot and extracting the map via SSH before shutting down