98 research outputs found
A driver model with supervision aspects
Human driver compensatory reactions -- Driver intelligence and Path Tracking (supervision) -- From human decision making to design of control level -- Vehicle models -- History of driver models -- Controller for car-like mobile robots -- Control problems of vehicle cartesian coordiantes -- Independent speed control with geometric lateral-offset tracking -- Kinematics dynamics and control of a car-like mobile robot -- Looking ahead path tracking of a car-like mobile robot -- Geometric lateral-offset tracking and speed control of a car-like mobile robot -- Equations of motion of a car-like robot using autolev programming
Research on a semiautonomous mobile robot for loosely structured environments focused on transporting mail trolleys
In this thesis is presented a novel approach to model, control, and planning the motion of
a nonholonomic wheeled mobile robot that applies stable pushes and pulls to a
nonholonomic cart (York mail trolley) in a loosely structured environment. The method is
based on grasping and ungrasping the nonholonomic cart, as a result, the robot changes its
kinematics properties. In consequence, two robot configurations are produced by the task
of grasping and ungrasping the load, they are: the single-robot configuration and the
robot-trolley configuration. Furthermore, in order to comply with the general planar
motion law of rigid bodies and the kinematic constraints imposed by the robot wheels for
each configuration, the robot has been provided with two motorized steerable wheels in
order to have a flexible platform able to adapt to these restrictions. [Continues.
Control of Outdoor Robots at Higher Speeds on Challenging Terrain
This thesis studies the motion control of wheeled mobile robots. Its focus is set on high speed control on challenging terrain. Additionally, it deals with the general problem of path following, as well as path planning and obstacle avoidance in difficult conditions.
First, it proposes a heuristic longitudinal control for any wheeled mobile robot, and evaluates it on different kinematic configurations and in different conditions, including laboratory experiments and participation in a robotic competition.
Being the focus of the thesis, high speed control on uneven terrain is thoroughly studied, and a novel control law is proposed, based on a new model representation of skid-steered vehicles, and comprising of nonlinear lateral and longitudinal control. The lateral control part is based on the Lyapunov theory, and the convergence of the vehicle to the geometric reference path is proven. The longitudinal control is designed for high speeds, taking actuator saturation and the vehicle properties into account. The complete solution is experimentally tested on two different vehicles on several different terrain types, reaching the speeds of ca. 6 m/s, and compared against two state-of-the-art algorithms.
Furthermore, a novel path planning and obstacle avoidance system is proposed, together with an extension of the proposed high speed control, which builds up a navigation system capable of autonomous outdoor person following. This system is experimentally compared against two classical obstacle avoidance methods, and evaluated by following a human jogger in outdoor environments, with both static and dynamic obstacles.
All the proposed methods, together with various different state-of-the-art control approaches, are unified into one framework. The proposed framework can be used to control any wheeled mobile robot, both indoors and outdoors, at low or high speeds, avoiding all the obstacles on the way. The entire work is released as open-source software
Path planning algorithms for autonomous navigation of a non-holonomic robot in unstructured environments
openPath planning is a crucial aspect of autonomous robot navigation, enabling robots to efficiently and safely navigate through complex environments. This thesis focuses on autonomous navigation for robots in dynamic and uncertain environments. In particular, the project aims to analyze the localization and path planning problems. A fundamental review of the existing literature on path planning algorithms has been carried on. Various factors affecting path planning, such as sensor data fusion, map representation, and motion constraints, are also analyzed. Thanks to the collaboration with E80 Group S.p.A., the project has been developed using ROS (Robot Operating System) on a Clearpath Dingo-O, an indoor mobile robot. To address the challenges posed by unstructured and dynamic environments, ROS follows a combined approach of using a global planner and a local planner. The global planner generates a high-level path, considering the overall environment, while the local planner handles real-time adjustments to avoid moving obstacles and optimize the trajectory. This thesis describes the role of the global planner in a ROS-framework. Performance benchmarking of traditional algorithms like Dijkstra and A*, as well as other techniques, is fundamental in order to understand the limits of these methods. In the end, the Hybrid A* algorithm is introduced as a promising approach for addressing the issues of unstructured environments for autonomous navigation of a non-holonomic robot. The core concepts and implementation details of the algorithm are discussed, emphasizing its ability to efficiently explore continuous state spaces and generate drivable paths.The effectiveness of the proposed path planning algorithms is evaluated through extensive simulations and real-world experiments using the mobile platform. Performance metrics such as path length, execution time, and collision avoidance are analyzed to assess the efficiency and reliability of the algorithms.Path planning is a crucial aspect of autonomous robot navigation, enabling robots to efficiently and safely navigate through complex environments. This thesis focuses on autonomous navigation for robots in dynamic and uncertain environments. In particular, the project aims to analyze the localization and path planning problems. A fundamental review of the existing literature on path planning algorithms has been carried on. Various factors affecting path planning, such as sensor data fusion, map representation, and motion constraints, are also analyzed. Thanks to the collaboration with E80 Group S.p.A., the project has been developed using ROS (Robot Operating System) on a Clearpath Dingo-O, an indoor mobile robot. To address the challenges posed by unstructured and dynamic environments, ROS follows a combined approach of using a global planner and a local planner. The global planner generates a high-level path, considering the overall environment, while the local planner handles real-time adjustments to avoid moving obstacles and optimize the trajectory. This thesis describes the role of the global planner in a ROS-framework. Performance benchmarking of traditional algorithms like Dijkstra and A*, as well as other techniques, is fundamental in order to understand the limits of these methods. In the end, the Hybrid A* algorithm is introduced as a promising approach for addressing the issues of unstructured environments for autonomous navigation of a non-holonomic robot. The core concepts and implementation details of the algorithm are discussed, emphasizing its ability to efficiently explore continuous state spaces and generate drivable paths.The effectiveness of the proposed path planning algorithms is evaluated through extensive simulations and real-world experiments using the mobile platform. Performance metrics such as path length, execution time, and collision avoidance are analyzed to assess the efficiency and reliability of the algorithms
Recommended from our members
Design of a cognitive neural predictive controller for mobile robot
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel UniversityIn this thesis, a cognitive neural predictive controller system has been designed to guide a nonholonomic wheeled mobile robot during continuous and non-continuous trajectory tracking and to navigate through static obstacles with collision-free and minimum tracking error. The structure of the controller consists of two layers; the first layer is a neural network system that controls the mobile robot actuators in order to track a desired path. The second layer of the controller is cognitive layer that collects information from the environment and plans the optimal path. In addition to this, it detects if there is any obstacle in the path so it can be avoided by re-planning the trajectory using particle swarm optimisation (PSO) technique.
Two neural networks models are used: the first model is modified Elman recurrent neural network model that describes the kinematic and dynamic model of the mobile robot and it is trained off-line and on-line stages to guarantee that the outputs of the model will accurately represent the actual outputs of the mobile robot system. The trained neural model acts as the position and orientation identifier. The second model is feedforward multi-layer perceptron neural network that describes a feedforward neural controller and it is trained off-line and its weights are adapted on-line to find the reference torques, which controls the steady-state outputs of the mobile robot system. The feedback neural controller is based on the posture neural identifier and quadratic performance index predictive optimisation algorithm for N step-ahead prediction in order to find the optimal torque action in the transient to stabilise the tracking error of the mobile robot system when the trajectory of the robot is drifted from the desired path during transient state.
Three controller methodologies were developed: the first is the feedback neural controller; the second is the nonlinear PID neural feedback controller and the third is nonlinear inverse dynamic neural feedback controller, based on the back-stepping method and Lyapunov criterion. The main advantages of the presented approaches are to plan an optimal path for itself avoiding obstructions by using intelligent (PSO) technique as well as the analytically derived control law, which has significantly high computational accuracy with predictive optimisation technique to obtain the optimal torques control action and lead to minimum tracking error of the mobile robot for different types of trajectories.
The proposed control algorithm has been applied to monitor a nonholonomic wheeled mobile robot, has demonstrated the capability of tracking different trajectories with continuous gradients (lemniscates and circular) or non-continuous gradients (square) with bounded external disturbances and static obstacles. Simulations results and experimental work showed the effectiveness of the proposed cognitive neural predictive control algorithm; this is demonstrated by the minimised tracking error to less than (1 cm) and obtained smoothness of the torque control signal less than maximum torque (0.236 N.m), especially when external disturbances are applied and navigating through static obstacles.
Results show that the five steps-ahead prediction algorithm has better performance compared to one step-ahead for all the control methodologies because of a more complex control structure and taking into account future values of the desired one, not only the current value, as with one step-ahead method. The mean-square error method is used for each component of the state error vector to compare between each of the performance control methodologies in order to give better control results
Support polygon in the hybrid legged-wheeled CENTAURO robot: modelling and control
Search for the robot capable to perform well in the real-world has sparked an interest in the hybrid locomotion systems. The hybrid legged-wheeled robots combine the advantages of the standard legged and wheeled platforms by switching between the quick and efficient wheeled motion on the flat grounds and the more versatile legged mobility on the unstructured terrains. With the locomotion flexibility offered by the hybrid mobility and appropriate control tools, these systems have high potential to excel in practical applications adapting effectively to real-world during locomanipuation operations. In contrary to their standard well-studied counterparts, kinematics of this newer type of robotic platforms has not been fully understood yet. This gap may lead to unexpected results when the standard locomotion methods are applied to hybrid legged-wheeled robots. To better understand mobility of the hybrid legged-wheeled robots, the model that describes the support polygon of a general hybrid legged-wheeled robot as a function of the wheel angular velocities without assumptions on the robot kinematics or wheel camber angle is proposed and analysed in this thesis. Based on the analysis of the developed support polygon model, a robust omnidirectional driving scheme has been designed. A continuous wheel motion is resolved through the Inverse Kinematics (IK) scheme, which generates robot motion compliant with the Non-Sliding Pure-Rolling (NSPR) condition. A higher-level scheme resolving a steering motion to comply with the non-holonomic constraint and to tackle the structural singularity is proposed. To improve the robot performance in presence to the unpredicted circumstances, the IK scheme has been enhanced with the introduction of a new reactive support polygon adaptation task. To this end, a novel quadratic programming task has been designed to push the system Support Polygon Vertices (SPVs) away from the robot Centre of Mass (CoM), while respecting the leg workspace limits. The proposed task has been expressed through the developed SPV model to account for the hardware limits. The omnidirectional driving and reactive control schemes have been verified in the simulation and hardware experiments. To that end, the simulator for the CENTAURO robot that models the actuation dynamics and the software framework for the locomotion research have been developed
Characterization Of Cooperative Control For Multiple Non-Holonomic Wheeled Mobile Robots To Achieve Formation Tracking
Distributed control for cooperative system is an emerging research �eld in control system. This research focuses on characterization of the distributed control
algorithm in solving formation tracking for multiple non-holonomic wheeled mobile robots. The existing research work mostly used mathematical approach to proof the
convergence of controller but does not investigate how the parameters would a�ect the controller. Besides, usually only one communication topology is presented in
solving formation tracking. Therefore, this research aims to �ll in the gap on current research by performing characterization of gain parameters in the distributed
controller studied. Besides, several communication topologies are evaluated to understand how the neighbouring agents connected will impact the performance. A multi-agent system that consists of four wheeled mobile robots are investigated in
this research using simulation approach. LabVIEWTM is used to simulate the multi- agent formation control. This research managed to perform the characterization
of gain parameters and evaluate di�erent communication topologies. The characterization would complement the existing Lyapunov analysis thereby improving the
research in cooperative formation control of wheeled mobile robot. This has helped to understand the how the distributed controller studied and used to tune the con-
troller to solve the formation tracking. The formation tracking control is partially achieved and can be further improved by making the parameters adaptive to achieve
state consensus
Analysis and Control of Mobile Robots in Various Environmental Conditions
The world sees new inventions each day, made to make the lifestyle of humans more easy and luxurious. In such global scenario, the robots have proved themselves to be an invention of great importance. The robots are being used in almost each and every field of the human world. Continuous studies are being done on them to make them simpler and easier to work with. All fields are being unraveled to make them work better in the human world without human interference. We focus on the navigation field of these mobile robots. The aim of this thesis is to find the controller that produces the most optimal path for the robot to reach its destination without colliding or damaging itself or the environment. The techniques like Fuzzy logic, Type 2 fuzzy logic, Neural networks and Artificial bee colony have been discussed and experimented to find the best controller that could find the most optimal path for the robot to reach its goal position. Simulation and Experiments have been done alike to find out the optimal path for the robot
- …