Index to NASA Tech Briefs, 1975

This index contains abstracts and four indexes--subject, personal author, originating Center, and Tech Brief number--for 1975 Tech Briefs

Polypyrrole Coated PET Fabrics for Thermal Applications

Polypyrrole can be chemically synthesized on PET fabrics, giving rise to textiles with high electric conductivity. These textiles are suitable for several applications from antistatic films to electromagnetic interference shielding devices. Here we discuss the thermal-electric performance and the heat generation of polypyrrole coated PET fabric samples, previously studied because of their electric conductivity and electromagnetic interference shielding effectiveness. The measured Seebeck effect is comparable with that of metallic thermocouples. Since polypyrrole shows extremely low thermal diffusivities regardless of the electrical conductivity, the low thermal conductivity gives significant advantage to the thermoelectric figure-of-merit ZT, comparable with that of some traditional inorganic thermoelectric materials. The heat generation is also investigated for possible heating textile devices. The results confirm polypyrrole as a prom- ising material for thermal electric applications due to its easy preparation in low cost processin

Microheated substrates for patterning cells and controlling development

Here, we seek to control cellular development by devising a means through which cells can be subjected to a microheated environment in standard culture conditions. Numerous techniques have been devised for controlling cellular function and development via manipulation of surface environmental cues at the micro- and nanoscale. It is well understood that temperature plays a significant role in the rate of cellular activities, migratory behavior (thermotaxis), and in some cases, protein expression. Yet, the effects and possible utilization of micrometer-scale temperature fields in cell cultures have not been explored. Toward this end, two types of thermally isolated microheated substrates were designed and fabricated, one with standard backside etching beneath a dielectric film and another with a combination of surface and bulk micromachining and backside etching. The substrates were characterized with infrared microscopy, finite element modeling, scanning electron microscopy, stylus profilometry, and electrothermal calibrations. Neuron culture studies were conducted on these substrates to 1) examine the feasibility of using a microheated environment to achieve patterned cell growth and 2) selectively accelerate neural development on regions less than 100$mu m$wide. Results show that attached neurons, grown on microheated regions set at 37$~^circ C$, extended processes substantially faster than those incubated at 25$~^circ C$on the same substrate. Further, unattached neurons were positioned precisely along the length of the heater filament (operating at 45$~^circ C$) using free convection currents. These preliminary findings indicate that microheated substrates may be used to direct cellular development spatially in a practical manner.$hfillhbox[1414]

Development of model based sensors for the supervision of a solar dryer

Solar dryers are increasingly used in developing countries as an alternative to drying in open air, however the inherent variability of the drying conditions during day and along year drive the need for achieving low cost sensors that would enable to characterize the drying process and to react accordingly. This paper provides three different and complementary approaches for model based sensors that make use of the psychrometric properties of the air inside the drying chamber and the temperature oscillations of the wood along day. The simplest smart sensor, Smart-1, using only two Sensirion sensors, allows to estimate the accumulated water extracted from wood along a complete drying cycle with a correlation coefficient of 0.97. Smart-2 is a model based sensor that relays on the diffusion kinetics by means of assesing temperature and relative humidity of the air inside the kiln. Smart-2 model allows to determine the diffusivity, being the average value of D for the drying cycle studied equal to 5.14 × 10−10 m2 s−1 and equal to 5.12 × 10−10 m2 s−1 for two experiments respectively. The multidistributed supervision of the dryer shows up the lack of uniformity in drying conditions supported by the wood planks located in the inner or center of the drying chamber where constant drying rate kinetics predominate. Finally, Smart-3 indicates a decreasing efficiency along the drying process from 0.9 to 0.

Disseny i construcció d'una sonda atmosfèrica

The project consists of the construction of a functional meteorological probe, controlled by an Arduino microcontroller. This probe was design to measure pressure and temperature as functions of the altitude. This device is the first of its kind built at the EETAC, thus a considerable effort of requirement definition has been done. In the present report we describe how all the probesystems were designed, and all the necessary components as well as the reason why they were chosen are described. The resulting design is modular in order to facilitate future improvements/expansions.The steps necessary for the assembly of all the components in a common structure are detailed, as well as the choice of tools and materials. All the systems developed were tested simulating conditions similar to those expected in the real mission.Finally, after the construction and validation processes, all the materials and the tasks needed to launch the probe up to at an altitude of 35 km are detailed.The present report is intended to serve as a guide for futuresimilar projects in EETAC. The resulting device from this work is named FourCast after our surnames

Earth radiation budget measurement from a spinning satellite: Conceptual design of detectors

The conceptual design, sensor characteristics, sensor performance and accuracy, and spacecraft and orbital requirements for a spinning wide-field-of-view earth energy budget detector were investigated. The scientific requirements for measurement of the earth's radiative energy budget are presented. Other topics discussed include the observing system concept, solar constant radiometer design, plane flux wide FOV sensor design, fast active cavity theory, fast active cavity design and error analysis, thermopile detectors as an alternative, pre-flight and in-flight calibration plane, system error summary, and interface requirements

Monitoring of the primary drying of a lyophilization process in vials

An innovative and modular system (LyoMonitor) for monitoring the primary drying of a lyophilization process in vials is illustrated: it integrates some commercial devices (pressure gauges, moisture sensor and mass spectrometer), an innovative balance and a manometric temperature measurement system based on an improved algorithm (DPE) to estimate sublimating interface temperature and position, product temperature profile, heat and mass transfer coefficients. A soft-sensor using a multipoint wireless thermometer can also estimate the previous parameters in a large number of vials. The performances of the previous devices for the determination of the end of the primary drying are compared. Finally, all these sensors can be used for control purposes and for the optimization of the process recipe; the use of DPE in a control loop will be shown as an exampl