Selective Combining for Hybrid Cooperative Networks

In this study, we consider the selective combining in hybrid cooperative networks (SCHCNs scheme) with one source node, one destination node and $N$ relay nodes. In the SCHCN scheme, each relay first adaptively chooses between amplify-and-forward protocol and decode-and-forward protocol on a per frame basis by examining the error-detecting code result, and $N_c$ ($1\leq N_c \leq N$) relays will be selected to forward their received signals to the destination. We first develop a signal-to-noise ratio (SNR) threshold-based frame error rate (FER) approximation model. Then, the theoretical FER expressions for the SCHCN scheme are derived by utilizing the proposed SNR threshold-based FER approximation model. The analytical FER expressions are validated through simulation results.Comment: 27 pages, 8 figures, IET Communications, 201

Design and Performance Analysis of Efficient Cooperative Wireless Communication Systems

Cooperative communication has recently become a key technology for modern wireless networks such as 3GPP long-term evolution and WiMAX, because in such networks the transmission rate, the communication reliability, and coverage problems could be improved in a cost-effective manner. This, however, faces many design challenges. First, cooperative transmission typically involves a relaying phase which requires extra resources. This may cause a reduction in the spectral efficiency. Second, extra control signaling increases the complexity of operation, which may limit practical implementation. In addition, a wireless channel is time-varying, mainly due to the multipath propagation. As a result, a careful design of efficient cooperative communication systems is required, not only to enhance the spectral efficiency and maintain the quality-of-service (QoS), but also to be practical. In this dissertation, we aim to address the challenges imposed by cooperative communication and wireless transmission, and design the efficient and distributed systems which can be practically implemented in existing wireless systems. The research work is divided into two main topics: 1) adaptive cooperative wireless systems with variable-rate transmission, and 2) cooperative wireless systems with a power consumption constraint. The first topic investigates how the spectral efficiency of cooperative wireless communication systems can be improved while maintaining the QoS in terms of bit error rate and outage probability. The spectral efficiency enhancement is achieved by using three techniques: adaptivity over the relay node (i.e., relay node is active or not), adaptivity over the modulation mode, and relay selection. Based on that, we propose several adaptive cooperative schemes for both the decode-and-forward (DF) and amplify-and-forward (AF) protocols. To evaluate these schemes, we provide performance analysis in terms of average spectral efficiency, average bit error rate (ABER), and outage probability over Rayleigh fading channels. We start with the single-relay cooperative system using DF protocol, in which two adaptive cooperative schemes with variable-rate transmission are proposed. The first scheme, called the minimum error rate scheme (MERS), aims to exploit the transmit diversity to improve the bit error rate. By trading the multiplexing gain against the diversity gain, we propose the second scheme, called the maximum spectral efficiency scheme (MSES), in which cooperative transmission is avoided whenever it is not beneficial. The MERS improves the ABER significantly and achieves equal or better average spectral efficiency compared to the fixed (i.e., non-adaptive) relaying scheme. In contrast, the MSES provides the best average spectral efficiency due to its ability to not only adapt to the channel variation but also to switch between cooperative and non-cooperative transmissions. To further increase the spectral efficiency, we then propose the third scheme, called variable-rate based relay selection (VRRS) scheme, in which a relay node is selected from among the available relay nodes, based on a predefined criterion. Furthermore, we propose two AF adaptive cooperative schemes, mainly to enhance the spectral efficiency. In the first scheme, we introduce a generalized switching policy (GSP) for a single-relay cooperative wireless system that exploits the variable-rate transmission and useful cooperative regions. The second scheme, called the AF efficient relay selection (AFERS) scheme, extends the GSP to also consider the relay selection technique. Analytical and simulation results verify that the AFERS scheme not only outperforms conventional direct transmission in terms of the average spectral efficiency, but also the AF fixed relaying and the outage-based AF adaptive cooperative scheme. The second topic investigates the fair power consumption of the relay nodes for AF cooperative wireless communication systems. The fairness is defined as to achieve equal power consumption over the relay nodes. We focus on how the relay selection process can be controlled in a distributed manner so that the power consumption of the relay nodes can be included in relay selection. We first introduce a simple closed-form expression for the weight coefficient used in order to achieve the considered fairness that depends only on the local average channel conditions of the relay path. We then derive closed-form expressions of the weighted outage probability and ABER and show that our proposed strategy not only has less complexity than the conventional centralized one but also provides better accuracy in distributing the total consumed power equally among the relay nodes without affecting the performance

Performance Analysis of Best Relaying Protocol Selection with Interferences at Relays

In this paper, we investigate the performance of selecting the best protocol between amplify and forward (AF) and decode and forward (DF) in multiple relay networks with multiple interferences at relays. In the selection scheme, the best protocol between AF and DF is selected depending on the comparisons of signal-to-interference and noise ratio (SINR) for all source-relay links. All relays measure the received SINR to decide forwarding signal or not. When SINR is above a certain threshold then DF is used otherwise AF is used. Particularly, we develop an accurate mathematical model for best relaying protocol by considering the effect of interferences to our scheme. Firstly, we derive the asymptotic closed form expression for the symbol error rate (SER) for the system under study. Also we derive an upper and lower bound of symbol error rate and show how they were tight with exact SER. Furthermore an approximate expression for the outage probability is derived. Numerical results are finally presented to validate the theoretical analysis with a different number of relays

Cooperative Symbol-Based Signaling for Networks with Multiple Relays

Wireless channels suffer from severe inherent impairments and hence reliable and high data rate wireless transmission is particularly challenging to achieve. Fortunately, using multiple antennae improves performance in wireless transmission by providing space diversity, spatial multiplexing, and power gains. However, in wireless ad-hoc networks multiple antennae may not be acceptable due to limitations in size, cost, and hardware complexity. As a result, cooperative relaying strategies have attracted considerable attention because of their abilities to take advantage of multi-antenna by using multiple single-antenna relays. This study is to explore cooperative signaling for different relay networks, such as multi-hop relay networks formed by multiple single-antenna relays and multi-stage relay networks formed by multiple relaying stages with each stage holding several single-antenna relays. The main contribution of this study is the development of a new relaying scheme for networks using symbol-level modulation, such as binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK). We also analyze effects of this newly developed scheme when it is used with space-time coding in a multi-stage relay network. Simulation results demonstrate that the new scheme outperforms previously proposed schemes: amplify-and-forward (AF) scheme and decode-and-forward (DF) scheme

A Simple Cooperative Diversity Method Based on Network Path Selection

Cooperative diversity has been recently proposed as a way to form virtual antenna arrays that provide dramatic gains in slow fading wireless environments. However most of the proposed solutions require distributed space-time coding algorithms, the careful design of which is left for future investigation if there is more than one cooperative relay. We propose a novel scheme, that alleviates these problems and provides diversity gains on the order of the number of relays in the network. Our scheme first selects the best relay from a set of M available relays and then uses this best relay for cooperation between the source and the destination. We develop and analyze a distributed method to select the best relay that requires no topology information and is based on local measurements of the instantaneous channel conditions. This method also requires no explicit communication among the relays. The success (or failure) to select the best available path depends on the statistics of the wireless channel, and a methodology to evaluate performance for any kind of wireless channel statistics, is provided. Information theoretic analysis of outage probability shows that our scheme achieves the same diversity-multiplexing tradeoff as achieved by more complex protocols, where coordination and distributed space-time coding for M nodes is required, such as those proposed in [7]. The simplicity of the technique, allows for immediate implementation in existing radio hardware and its adoption could provide for improved flexibility, reliability and efficiency in future 4G wireless systems.Comment: To appear, IEEE JSAC, special issue on 4