Improved Side Information Generation for Distributed Video Coding by Exploiting Spatial and Temporal Correlations

Distributed Video Coding (DVC) is a new paradigm in video coding, which is receiving a lot of interests nowadays. Side Information (SI) generation is a key function in the DVC decoder, and plays a key-role in determining the performance of the codec. This paper proposes an improved motion compensated frame interpolation for SI generation in DVC, which exploits both spatial and temporal correlations in the sequences. Partially decoded Wyner-Ziv (WZ) frames, based on initial SI by motion compensated temporal interpolation, are exploited to improve the performance of the whole SI generation. More specifically, an enhanced temporal frame interpolation is proposed, including motion vector refinement and smoothing, optimal compensation mode selection, and a new matching criterion for motion estimation. The improved SI technique is also applied to a new hybrid spatial and temporal error concealment scheme to conceal errors in WZ frames, where the error-concealed results from spatial concealment are used to improve the performance of temporal concealment. Simulation results show that the proposed scheme can achieve up to 1.0 dB improvement in rate distortion performance in WZ frames for video with high motion, when compared to state-of-the-art DVC. In addition, both the objective and perceptual quality of the corrupted sequences are significantly improved by the proposed hybrid error concealment scheme, outperforming both spatial and temporal concealments alone

Selected topics on distributed video coding

Distributed Video Coding (DVC) is a new paradigm for video compression based on the information theoretical results of Slepian and Wolf (SW), and Wyner and Ziv (WZ). While conventional coding has a rigid complexity allocation as most of the complex tasks are performed at the encoder side, DVC enables a flexible complexity allocation between the encoder and the decoder. The most novel and interesting case is low complexity encoding and complex decoding, which is the opposite of conventional coding. While the latter is suitable for applications where the cost of the decoder is more critical than the encoder's one, DVC opens the door for a new range of applications where low complexity encoding is required and the decoder's complexity is not critical. This is interesting with the deployment of small and battery-powered multimedia mobile devices all around in our daily life. Further, since DVC operates as a reversed-complexity scheme when compared to conventional coding, DVC also enables the interesting scenario of low complexity encoding and decoding between two ends by transcoding between DVC and conventional coding. More specifically, low complexity encoding is possible by DVC at one end. Then, the resulting stream is decoded and conventionally re-encoded to enable low complexity decoding at the other end. Multiview video is attractive for a wide range of applications such as free viewpoint television, which is a system that allows viewing the scene from a viewpoint chosen by the viewer. Moreover, multiview can be beneficial for monitoring purposes in video surveillance. The increased use of multiview video systems is mainly due to the improvements in video technology and the reduced cost of cameras. While a multiview conventional codec will try to exploit the correlation among the different cameras at the encoder side, DVC allows for separate encoding of correlated video sources. Therefore, DVC requires no communication between the cameras in a multiview scenario. This is an advantage since communication is time consuming (i.e. more delay) and requires complex networking. Another appealing feature of DVC is the fact that it is based on a statistical framework. Moreover, DVC behaves as a natural joint source-channel coding solution. This results in an improved error resilience performance when compared to conventional coding. Further, DVC-based scalable codecs do not require a deterministic knowledge of the lower layers. In other words, the enhancement layers are completely independent from the base layer codec. This is called the codec-independent scalability feature, which offers a high flexibility in the way the various layers are distributed in a network. This thesis addresses the following topics: First, the theoretical foundations of DVC as well as the practical DVC scheme used in this research are presented. The potential applications for DVC are also outlined. DVC-based schemes use conventional coding to compress parts of the data, while the rest is compressed in a distributed fashion. Thus, different conventional codecs are studied in this research as they are compared in terms of compression efficiency for a rich set of sequences. This includes fine tuning the compression parameters such that the best performance is achieved for each codec. Further, DVC tools for improved Side Information (SI) and Error Concealment (EC) are introduced for monoview DVC using a partially decoded frame. The improved SI results in a significant gain in reconstruction quality for video with high activity and motion. This is done by re-estimating the erroneous motion vectors using the partially decoded frame to improve the SI quality. The latter is then used to enhance the reconstruction of the finally decoded frame. Further, the introduced spatio-temporal EC improves the quality of decoded video in the case of erroneously received packets, outperforming both spatial and temporal EC. Moreover, it also outperforms error-concealed conventional coding in different modes. Then, multiview DVC is studied in terms of SI generation, which differentiates it from the monoview case. More specifically, different multiview prediction techniques for SI generation are described and compared in terms of prediction quality, complexity and compression efficiency. Further, a technique for iterative multiview SI is introduced, where the final SI is used in an enhanced reconstruction process. The iterative SI outperforms the other SI generation techniques, especially for high motion video content. Finally, fusion techniques of temporal and inter-view side informations are introduced as well, which improves the performance of multiview DVC over monoview coding. DVC is also used to enable scalability for image and video coding. Since DVC is based on a statistical framework, the base and enhancement layers are completely independent, which is an interesting property called codec-independent scalability. Moreover, the introduced DVC scalable schemes show a good robustness to errors as the quality of decoded video steadily decreases with error rate increase. On the other hand, conventional coding exhibits a cliff effect as the performance drops dramatically after a certain error rate value. Further, the issue of privacy protection is addressed for DVC by transform domain scrambling, which is used to alter regions of interest in video such that the scene is still understood and privacy is preserved as well. The proposed scrambling techniques are shown to provide a good level of security without impairing the performance of the DVC scheme when compared to the one without scrambling. This is particularly attractive for video surveillance scenarios, which is one of the most promising applications for DVC. Finally, a practical DVC demonstrator built during this research is described, where the main requirements as well as the observed limitations are presented. Furthermore, it is defined in a setup being as close as possible to a complete real application scenario. This shows that it is actually possible to implement a complete end-to-end practical DVC system relying only on realistic assumptions. Even though DVC is inferior in terms of compression efficiency to the state of the art conventional coding for the moment, strengths of DVC reside in its good error resilience properties and the codec-independent scalability feature. Therefore, DVC offers promising possibilities for video compression with transmission over error-prone environments requirement as it significantly outperforms conventional coding in this case

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

A MODEL FOR PREDICTING THE PERFORMANCE OF IP VIDEOCONFERENCING

With the incorporation of free desktop videoconferencing (DVC) software on the majority of the world's PCs, over the recent years, there has, inevitably, been considerable interest in using DVC over the Internet. The growing popularity of DVC increases the need for multimedia quality assessment. However, the task of predicting the perceived multimedia quality over the Internet Protocol (IP) networks is complicated by the fact that the audio and video streams are susceptible to unique impairments due to the unpredictable nature of IP networks, different types of task scenarios, different levels of complexity, and other related factors. To date, a standard consensus to define the IP media Quality of Service (QoS) has yet to be implemented. The thesis addresses this problem by investigating a new approach to assess the quality of audio, video, and audiovisual overall as perceived in low cost DVC systems. The main aim of the thesis is to investigate current methods used to assess the perceived IP media quality, and then propose a model which will predict the quality of audiovisual experience from prevailing network parameters. This thesis investigates the effects of various traffic conditions, such as, packet loss, jitter, and delay and other factors that may influence end user acceptance, when low cost DVC is used over the Internet. It also investigates the interaction effects between the audio and video media, and the issues involving the lip sychronisation error. The thesis provides the empirical evidence that the subjective mean opinion score (MOS) of the perceived multimedia quality is unaffected by lip synchronisation error in low cost DVC systems. The data-gathering approach that is advocated in this thesis involves both field and laboratory trials to enable the comparisons of results between classroom-based experiments and real-world environments to be made, and to provide actual real-world confirmation of the bench tests. The subjective test method was employed since it has been proven to be more robust and suitable for the research studies, as compared to objective testing techniques. The MOS results, and the number of observations obtained, have enabled a set of criteria to be established that can be used to determine the acceptable QoS for given network conditions and task scenarios. Based upon these comprehensive findings, the final contribution of the thesis is the proposal of a new adaptive architecture method that is intended to enable the performance of IP based DVC of a particular session to be predicted for a given network condition

Research and developments of distributed video coding

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The recent developed Distributed Video Coding (DVC) is typically suitable for the applications such as wireless/wired video sensor network, mobile camera etc. where the traditional video coding standard is not feasible due to the constrained computation at the encoder. With DVC, the computational burden is moved from encoder to decoder. The compression efficiency is achieved via joint decoding at the decoder. The practical application of DVC is referred to Wyner-Ziv video coding (WZ) where the side information is available at the decoder to perform joint decoding. This join decoding inevitably causes a very complex decoder. In current WZ video coding issues, many of them emphasise how to improve the system coding performance but neglect the huge complexity caused at the decoder. The complexity of the decoder has direct influence to the system output. The beginning period of this research targets to optimise the decoder in pixel domain WZ video coding (PDWZ), while still achieves similar compression performance. More specifically, four issues are raised to optimise the input block size, the side information generation, the side information refinement process and the feedback channel respectively. The transform domain WZ video coding (TDWZ) has distinct superior performance to the normal PDWZ due to the exploitation in spatial direction during the encoding. However, since there is no motion estimation at the encoder in WZ video coding, the temporal correlation is not exploited at all at the encoder in all current WZ video coding issues. In the middle period of this research, the 3D DCT is adopted in the TDWZ to remove redundancy in both spatial and temporal direction thus to provide even higher coding performance. In the next step of this research, the performance of transform domain Distributed Multiview Video Coding (DMVC) is also investigated. Particularly, three types transform domain DMVC frameworks which are transform domain DMVC using TDWZ based 2D DCT, transform domain DMVC using TDWZ based on 3D DCT and transform domain residual DMVC using TDWZ based on 3D DCT are investigated respectively. One of the important applications of WZ coding principle is error-resilience. There have been several attempts to apply WZ error-resilient coding for current video coding standard e.g. H.264/AVC or MEPG 2. The final stage of this research is the design of WZ error-resilient scheme for wavelet based video codec. To balance the trade-off between error resilience ability and bandwidth consumption, the proposed scheme emphasises the protection of the Region of Interest (ROI) area. The efficiency of bandwidth utilisation is achieved by mutual efforts of WZ coding and sacrificing the quality of unimportant area. In summary, this research work contributed to achieves several advances in WZ video coding. First of all, it is targeting to build an efficient PDWZ with optimised decoder. Secondly, it aims to build an advanced TDWZ based on 3D DCT, which then is applied into multiview video coding to realise advanced transform domain DMVC. Finally, it aims to design an efficient error-resilient scheme for wavelet video codec, with which the trade-off between bandwidth consumption and error-resilience can be better balanced