Quality-Oriented Mobility Management for Multimedia Content Delivery to Mobile Users

The heterogeneous wireless networking environment determined by the latest developments in wireless access technologies promises a high level of communication resources for mobile computational devices. Although the communication resources provided, especially referring to bandwidth, enable multimedia streaming to mobile users, maintaining a high user perceived quality is still a challenging task. The main factors which affect quality in multimedia streaming over wireless networks are mainly the error-prone nature of the wireless channels and the user mobility. These factors determine a high level of dynamics of wireless communication resources, namely variations in throughput and packet loss as well as network availability and delays in delivering the data packets. Under these conditions maintaining a high level of quality, as perceived by the user, requires a quality oriented mobility management scheme. Consequently we propose the Smooth Adaptive Soft-Handover Algorithm, a novel quality oriented handover management scheme which unlike other similar solutions, smoothly transfer the data traffic from one network to another using multiple simultaneous connections. To estimate the capacity of each connection the novel Quality of Multimedia Streaming (QMS) metric is proposed. The QMS metric aims at offering maximum flexibility and efficiency allowing the applications to fine tune the behavior of the handover algorithm. The current simulation-based performance evaluation clearly shows the better performance of the proposed Smooth Adaptive Soft-Handover Algorithm as compared with other handover solutions. The evaluation was performed in various scenarios including multiple mobile hosts performing handover simultaneously, wireless networks with variable overlapping areas, and various network congestion levels

Agricultural Monitoring System using Images through a LPWAN Network

Internet of things (IoT) has turned into an opportunity to connect millions of devices through communication networks in digital environments. Inside IoT and mainly in the technologies of communication networks, it is possible to find Low Power Wide Area Networks (LPWAN). Within these technologies, there are service platforms in unlicensed frequency bands such as the LoRa Wide Area Network (LoRaWAN). It has features such as low power consumption, long-distance operation between gateway and node, and low data transport capacity. LPWAN networks are not commonly used to transport high data rates as in the case of agricultural images. The main goal of this research is to present a methodology to transport images through LPWAN networks using LoRa modulation. The methodology presented in this thesis is composed of three stages mainly. The first one is image processing and classification process. This stage allows preparing the image in order to give the information to the classifier and separate the normal and abnormal images; i.e. to classify the images under the normal conditions of its representation in contrast with the images that can represent some sick or affectation with the consequent presence of a particular pathology. For this activity. it was used some techniques were used classifiers such as Support Vector Machine SVM, K-means clustering, neuronal networks, deep learning and convolutional neuronal networks. The last one offered the best results in classifying the samples of the images. The second stage consists in a compression technique and reconstruction algorithms. In this stage, a method is developed to process the image and entails the reduction of the high amount of information that an image has in its normal features with the goal to transport the lowest amount of information. For this purpose, a technique will be presented for the representation of the information of an image in a common base that improves the reduction process of the information. For this activity, the evaluated components were Wavelet, DCT-2D and Kronecker algorithms. The best results were obtained by Wavelet Transform. On the other hand, the compres- sion process entails a series of iterations in the vector information, therefore, each iteration is a possibility to reduce that vector until a value with a minimum PSNR (peak signal to noise ratio) that allows rebuilding the original vector. In the reconstruction process, Iterative Hard Thresholding (IHT), Ortogonal MAtching Pur- suit (OMP), Gradient Projection for Sparse Reconstruction (GPSR)and Step Iterative Shrinage/Thresholding (Twist) algorithms were evaluated. Twist showed the best performance in the results. Finally, in the third stage, LoRa modulation is implemented through the creation of LoRa symbols in Matlab with the compressed information. The symbols were delivered for transmission to Software Defined Radio (SDR). In the receptor, a SDR device receives the signal, which is converted into symbols that are in turn converted in an information vector. Then, the reconstruction process is carried out following the description in the last part of stage 2 - compression technique and reconstruction algorithms, which is described in more detailed in chapter 3, section 3.2. Finally, the image reconstructed is presented. The original image and the result image were compared in order to find the differences. This comparison used Peak Signal-to-Noise Ratio (PSNR) feature in order to get the fidelity of the reconstructed image with respect of the original image. In the receptor node, it is possible to observe the pathology of the leaf. The methodology is particularly applied for monitoring abnormal leaves samples in potato crops. This work allows finding a methodology to communicate images through LPWAN using the LoRa modulation technique. In this work, a framework was used to classify the images, then, to process them in order to reduce the amount of data, to establish communication between a transmitter and a receiver through a wireless communication system and finally, in the receptor, to obtain a picture that shows the particularity of the pathology in an agricultural crop.Gobernación de Boyacá, Colfuturo, Colciencias, Universidad Santo Tomás, Pontificia Universidad JaverianaInternet of things (IoT) has turned into an opportunity to connect millions of devices through communication networks in digital environments. Inside IoT and mainly in the technologies of communication networks, it is possible to find Low Power Wide Area Networks (LPWAN). Within these technologies, there are service platforms in unlicensed frequency bands such as the LoRa Wide Area Network (LoRaWAN). It has features such as low power consumption, long-distance operation between gateway and node, and low data transport capacity. LPWAN networks are not commonly used to transport high data rates as in the case of agricultural images. The main goal of this research is to present a methodology to transport images through LPWAN networks using LoRa modulation. The methodology presented in this thesis is composed of three stages mainly. The first one is image processing and classification process. This stage allows preparing the image in order to give the information to the classifier and separate the normal and abnormal images; i.e. to classify the images under the normal conditions of its representation in contrast with the images that can represent some sick or affectation with the consequent presence of a particular pathology. For this activity. it was used some techniques were used classifiers such as Support Vector Machine SVM, K-means clustering, neuronal networks, deep learning and convolutional neuronal networks. The last one offered the best results in classifying the samples of the images. The second stage consists in a compression technique and reconstruction algorithms. In this stage, a method is developed to process the image and entails the reduction of the high amount of information that an image has in its normal features with the goal to transport the lowest amount of information. For this purpose, a technique will be presented for the representation of the information of an image in a common base that improves the reduction process of the information. For this activity, the evaluated components were Wavelet, DCT-2D and Kronecker algorithms. The best results were obtained by Wavelet Transform. On the other hand, the compres- sion process entails a series of iterations in the vector information, therefore, each iteration is a possibility to reduce that vector until a value with a minimum PSNR (peak signal to noise ratio) that allows rebuilding the original vector. In the reconstruction process, Iterative Hard Thresholding (IHT), Ortogonal MAtching Pur- suit (OMP), Gradient Projection for Sparse Reconstruction (GPSR)and Step Iterative Shrinage/Thresholding (Twist) algorithms were evaluated. Twist showed the best performance in the results. Finally, in the third stage, LoRa modulation is implemented through the creation of LoRa symbols in Matlab with the compressed information. The symbols were delivered for transmission to Software Defined Radio (SDR). In the receptor, a SDR device receives the signal, which is converted into symbols that are in turn converted in an information vector. Then, the reconstruction process is carried out following the description in the last part of stage 2 - compression technique and reconstruction algorithms, which is described in more detailed in chapter 3, section 3.2. Finally, the image reconstructed is presented. The original image and the result image were compared in order to find the differences. This comparison used Peak Signal-to-Noise Ratio (PSNR) feature in order to get the fidelity of the reconstructed image with respect of the original image. In the receptor node, it is possible to observe the pathology of the leaf. The methodology is particularly applied for monitoring abnormal leaves samples in potato crops. This work allows finding a methodology to communicate images through LPWAN using the LoRa modulation technique. In this work, a framework was used to classify the images, then, to process them in order to reduce the amount of data, to establish communication between a transmitter and a receiver through a wireless communication system and finally, in the receptor, to obtain a picture that shows the particularity of the pathology in an agricultural crop.Doctor en IngenieríaDoctoradohttps://orcid.org/0000-0002-3554-1531https://scholar.google.com/citations?user=5_dx9REAAAAJ&hl=eshttps://scienti.minciencias.gov.co/cvlac/EnRecursoHumano/query.d

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

High speed 802.11ad wireless video streaming

The aim of this thesis is to investigate, both theoretically and experimentally, the capability of the IEEE 802.11ad device, the Wireless Gigabit Alliance known as WiGig operating in the 60 GHz band to handle rise in data traffic ubiquitous to high speed data transmission such as bulk data transfer, and wireless video streaming. According to Cisco and others, it is estimated that in 2020, internet video traffic will account for 82 % of all consumer internet traffic. This research evalu- ated the feasibility of the 60 GHz to provide minimum data rate of about 970 Mbps from the Ethernet link limited or clamped to 1 Gbps. This translated to 97 % effi- ciency with respect to the IEEE 802.11ad system performance. For the first time, the author proposed the enhancement of millimetre wave propagation through the use of specular reflection in non-line-of-sight environment, providing at least 94 % bandwidth utilization. Additional investigations result of the IEEE 802.11ad device in real live streaming of 4k ultra-high definition (UHD) video shows the feasibility of aggressive frequency reuse in the absence of co-channel interference. Moreover, using heuristic approach, this work compared materials absorption and signal reception at 60 GHz and the results gives better performance in contrast to the theoretical values. Finally, this thesis proposes a framework for the 802.11ad wireless H.264 video streaming over 60 GHz band. The work describes the potential and efficiency of WiGig device in streaming high definition (HD) video with high temporal index (TI) and 4k UHD video with no retransmission. Caching point established at the re-transmitter increase coverage and cache multimedia data. The results in this thesis shows the growing potential of millimeter wave technology, the WiGig for very high speed bulk data transfer, and live streaming video transmission

Progressive Source-Channel Coding for Multimedia Transmission over Noisy and Lossy Channels with and without Feedback

Rate-scalable or layered lossy source-coding is useful for progressive transmission of multimedia sources, where the receiver can reconstruct the source incrementally. This thesis considers ``joint source-channel'' schemes for such a progressive transmission, in the presence of noise or loss, with and without the use of a feedback link. First we design image communication schemes for memoryless and finite state channels using limited and explicitly constrained use of the feedback channel in the form of a variable incremental redundancy Hybrid ARQ protocol. Constraining feedback allows a direct comparison with schemes without feedback. Optimized feedback based systems are shown to have useful gains. Second, we develop a controlled Markov chain approach for constrained feedback Hybrid ARQ protocol design. The proposed methodology allows the protocol to be chosen from a collection of signal flow graphs, and also allows explicit control over the tradeoffs in throughput, reliability and complexity. Next we consider progressive image transmission in the absence of feedback. We assign unequal error protection to the bits of a rate-scalable source-coder using rate compatible channel codes. We show that, under the framework, the source and channel bits can be ``scheduled'' in a single bitstream in such a way that operational optimality is retained for different transmission budgets, creating a rate-scalable joint source-channel coder. Next we undertake the design of a joint source-channel decoder that uses ``distortion aware'' ACK/NACK feedback generation. For memoryless channels, and Type-I HARQ, the design of optimal ACK/NACK generation and decoding by packet combining is cast and solved as a sequential decision problem. We obtain dynamic programming based optimal solutions and also propose suboptimal, lower complexity distortion-aware decoders and feedback generation rules which outperform conventional BER based rules such as CRC-check. Finally we design operational rate-distortion optimal ACK/NACK feedback generation rules for transmitting a tree structured quantizer over a memoryless channel. We show that the optimal feedback generation rules are embedded, that is, they allow incremental switching to higher rates during the transmission. Also, we obtain the structure of the feedback generation rules in terms of a feedback threshold function that simplifies the implementation