Eco-efficient process based on conventional machining as an alternative technology to chemical milling of aeronautical metal skin panels

El fresado químico es un proceso diseñado para la reducción de peso de pieles metálicas que, a pesar de los problemas medioambientales asociados, se utiliza en la industria aeronáutica desde los años 50. Entre sus ventajas figuran el cumplimiento de las estrictas tolerancias de diseño de piezas aeroespaciales y que pese a ser un proceso de mecanizado, no induce tensiones residuales. Sin embargo, el fresado químico es una tecnología contaminante y costosa que tiende a ser sustituida. Gracias a los avances realizados en el mecanizado, la tecnología de fresado convencional permite alcanzar las tolerancias requeridas siempre y cuando se consigan evitar las vibraciones y la flexión de la pieza, ambas relacionadas con los parámetros del proceso y con los sistemas de utillaje empleados. Esta tesis analiza las causas de la inestabilidad del corte y la deformación de las piezas a través de una revisión bibliográfica que cubre los modelos analíticos, las técnicas computacionales y las soluciones industriales en estudio actualmente. En ella, se aprecia cómo los modelos analíticos y las soluciones computacionales y de simulación se centran principalmente en la predicción off-line de vibraciones y de posibles flexiones de la pieza. Sin embargo, un enfoque más industrial ha llevado al diseño de sistemas de fijación, utillajes, amortiguadores basados en actuadores, sistemas de rigidez y controles adaptativos apoyados en simulaciones o en la selección estadística de parámetros. Además se han desarrollado distintas soluciones CAM basadas en la aplicación de gemelos virtuales. En la revisión bibliográfica se han encontrado pocos documentos relativos a pieles y suelos delgados por lo que se ha estudiado experimentalmente el efecto de los parámetros de corte en su mecanizado. Este conjunto de experimentos ha demostrado que, pese a usar un sistema que aseguraba la rigidez de la pieza, las pieles se comportaban de forma diferente a un sólido rígido en términos de fuerzas de mecanizado cuando se utilizaban velocidades de corte cercanas a la alta velocidad. También se ha verificado que todas las muestras mecanizadas entraban dentro de tolerancia en cuanto a la rugosidad de la pieza. Paralelamente, se ha comprobado que la correcta selección de parámetros de mecanizado puede reducir las fuerzas de corte y las tolerancias del proceso hasta un 20% y un 40%, respectivamente. Estos datos pueden tener aplicación industrial en la simplificación de los sistemas de amarre o en el incremento de la eficiencia del proceso. Este proceso también puede mejorarse incrementando la vida de la herramienta al utilizar fluidos de corte. Una correcta lubricación puede reducir la temperatura del proceso y las tensiones residuales inducidas a la pieza. Con este objetivo, se han desarrollado diferentes lubricantes, basados en el uso de líquidos iónicos (IL) y se han comparado con el comportamiento tribológico del par de contacto en seco y con una taladrina comercial. Los resultados obtenidos utilizando 1 wt% de los líquidos iónicos en un tribómetro tipo pin-on-disk demuestran que el IL no halogenado reduce significativamente el desgaste y la fricción entre el aluminio, material a mecanizar, y el carburo de tungsteno, material de la herramienta, eliminando casi toda la adhesión del aluminio sobre el pin, lo que puede incrementar considerablemente la vida de la herramienta.Chemical milling is a process designed to reduce the weight of metals skin panels. This process has been used since 1950s in the aerospace industry despite its environmental concern. Among its advantages, chemical milling does not induce residual stress and parts meet the required tolerances. However, this process is a pollutant and costly technology. Thanks to the last advances in conventional milling, machining processes can achieve similar quality results meanwhile vibration and part deflection are avoided. Both problems are usually related to the cutting parameters and the workholding. This thesis analyses the causes of the cutting instability and part deformation through a literature review that covers analytical models, computational techniques and industrial solutions. Analytics and computational solutions are mainly focused on chatter and deflection prediction and industrial approaches are focused on the design of workholdings, fixtures, damping actuators, stiffening devices, adaptive control systems based on simulations and the statistical parameters selection, and CAM solutions combined with the use of virtual twins applications. In this literature review, few research works about thin-plates and thin-floors is found so the effect of the cutting parameters is also studied experimentally. These experiments confirm that even using rigid workholdings, the behavior of the part is different to a rigid body at high speed machining. On the one hand, roughness values meet the required tolerances under every set of the tested parameters. On the other hand, a proper parameter selection reduces the cutting forces and process tolerances by up to 20% and 40%, respectively. This fact can be industrially used to simplify workholding and increase the machine efficiency. Another way to improve the process efficiency is to increase tool life by using cutting fluids. Their use can also decrease the temperature of the process and the induced stresses. For this purpose, different water-based lubricants containing three types of Ionic Liquids (IL) are compared to dry and commercial cutting fluid conditions by studying their tribological behavior. Pin on disk tests prove that just 1wt% of one of the halogen-free ILs significantly reduces wear and friction between both materials, aluminum and tungsten carbide. In fact, no wear scar is noticed on the ball when one of the ILs is used, which, therefore, could considerably increase tool life

Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches

Thin-wall parts are common in the aeronautical sector. However, their machining presents serious challenges such as vibrations and part deflections. To deal with these challenges, di erent approaches have been followed in recent years. This work presents the state of the art of thin-wall light-alloy machining, analyzing the problems related to each type of thin-wall parts, exposing the causes of both instability and deformation through analytical models, summarizing the computational techniques used, and presenting the solutions proposed by di erent authors from an industrial point of view. Finally, some further research lines are proposed

Thin wall geometrical quality improvement in micromilling

Micromilling is one of the most versatile tooling processes being able to effectively manufacture three-dimensional complex features on moulds and dies achieving a good accuracy performance. Typical and challenging features for these microcomponents are high aspect ratio thin walls but no systematic approaches, as the one presented in this paper, exist in literature dealing with the relationship between nominal workpiece characteristics/process parameters, cutting forces, and workpiece quality. The present study focuses on 0.4 % carbon steel (C40) thin wall micromilling and evaluates two approaches for the thin wall geometrical quality improvement: a direct approach (relating process parameters, material and nominal workpiece characteristics to the workpiece quality characteristics) and a force-based approach (relating the same quantities through the cutting forces determination). The force-based approach relates the process parameters to the workpiece quality introducing physical quantities as cutting forces, which are suitable for monitoring and controlling purposes. A suitable experimental campaign has been designed in order to statistically analyze the cutting force responses, and a proper technique (ANalysis of COVAriance) has been applied to remove the tool wear effect. The relationship between cutting forces and workpiece quality has been quantitatively studied; this way, the feasibility of a general approach able to meet tolerances by controlling forces has been demonstrated

Quasistatic deflection analysis of slender ball-end milling cutter

This work was supported by the National Natural Science Foundation of China (Grant No. 51975333), Jinan University and Institute Innovation Team Program (Grant No. 2020GXRC025), and Taishan Scholars Project of Shandong Province (ts201712002).Peer reviewedPostprin

Cutting Forces Assessment in CNC Machining Processes: A Critical Review

Machining processes remain an unavoidable technique in the production of high-precision parts. Tool behavior is of the utmost importance in machining productivity and costs. Tool performance can be assessed by the roughness left on the machined surfaces, as well as of the forces developed during the process. There are various techniques to determine these cutting forces, such as cutting force prediction or measurement, using dynamometers and other sensor systems. This technique has often been used by numerous researchers in this area. This paper aims to give a review of the different techniques and devices for measuring the forces developed for machining processes, allowing a quick perception of the advantages and limitations of each technique, through the literature research carried out, using recently published worksThe present work was done and funded under the scope of the project ON-SURF (ANI | P2020 | POCI-01-0247-FEDER-024521, co-funded by Portugal 2020 and FEDER, through COMPETE 2020-Operational Programme for Competitiveness and Internationalisation. F.J.G. Silva also thanks INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industria, due to its support.info:eu-repo/semantics/publishedVersio

3D Finite Element Simulation of Micro End-Milling by Considering the Effect of Tool Run-Out

Understanding the micro milling phenomena involved in the process is critical and difficult through physical experiments. This study presents a 3D finite element modeling (3D FEM) approach for the micro end-milling process on Al6082-T6. The proposed model employs a Lagrangian explicit finite element formulation to perform coupled thermo-mechanical transient analyses. FE simulations were performed at different cutting conditions to obtain realistic numerical predictions of chip formation, temperature distribution, and cutting forces by considering the effect of tool run-out in the model. The radial run-out is a significant issue in micro milling processes and influences the cutting stability due to chip load and force variations. The Johnson-Cook (JC) material constitutive model was applied and its constants were determined by an inverse method based on the experimental cutting forces acquired during the micro end-milling tests. The FE model prediction capability was validated by comparing the numerical model results with experimental tests. The maximum tool temperature was predicted in a different angular position of the cutter which is difficult or impossible to obtain in experiments. The predicted results of the model, involving the run-out influence, showed a good correlation with experimental chip formation and the signal shape of cutting forces

Updated Force Model for Milling Nickel-based Superalloys

Nickel-based superalloys are commonly used in applications which require high strength and resistance to creep and oxidation in extreme conditions. All nickel-based superalloys are considered difficult to machine; however, cast gamma-prime-strengthened nickel-based superalloys are more difficult to machine than common nickel-based superalloys. Machining comprises a significant portion of manufacturing processes and with advancements in technology and material properties, the methods and models used must be adapted in order to keep pace. In this research, correlations are made, using fundamental principles, between measurements made with on-machine touch probes and the cutting tool\u27s wear state, those correlations are used in an adaptive algorithm to estimate the size of the tool wear, and the estimates are used in an updated mechanistic cutting force model to predict the progression of cutting forces in gamma-prime-strengthened Nickel-based superalloys. This work impacts machining operations on advanced and common materials by developing a tool wear estimation method with readily available equipment and a computationally tractable force model. It influences knowledge in the field through the fundamental relationships, robust adaptive approach, and modifications to the mechanistic force model. This research shows that on-machine touch probes are able to measure changes in the geometry of a cutting tool as it wears; however, measurement uncertainty results in 20 micrometers of variation in the wear estimation. The wear estimation was improved through the use of a Kalman filter. The average error from 24 estimations was 8 micrometers. Addressing the geometric changes in the tool due to wear, the mechanistic cutting force model estimated the progression of cutting forces with 30% more accuracy than without addressing the tool changes

Development of working procedures of a 5 Axis CNC milling machine

Dissertação de mestrado em Mechanical EngineeringThe work developed and presented on this dissertation tends to the installation and configurations of a 5-axis CNC machine with the creation of working procedures intended to build a stable workflow that can be employed by any individual expected to use the machine. Being a large field within mechanical engineering as well as being involved in a large selection of different industrial sectors, the concept of 5-axis machining will be explored to develop knowledge in terms of CAM programming and manipulation/optimization of toolpaths. The importance/functioning of the transmission of information both from post-processor to the controller and from the controller to the actual machine is also a critical point in this work as they are directly related to the quality of the parts produced. To accomplish this, the theoretical knowledge foundations regarding CNC machining work were researched, studied, and explained. Furthermore, the machine model in question (HY-6040 5-axis CNC Router) was meticulously analysed regarding to the machines structure, post-processor, and controller. Upon assembling all this information, and through the production of some test parts, a permanent manufacture workflow for different machining approaches was established and described.O trabalho desenvolvido e apresentado nesta dissertação tende à instalação e configuração de uma máquina CNC de 5-eixos, com a criação de procedimentos de trabalho destinados a criar um fluxo de trabalho estável que possa ser empregue por qualquer individuo que pretenda utilizar a máquina. Sendo um grande campo dentro da engenharia mecânica e estando também envolvido numa grande seleção de diferentes setores industriais, o conceito de maquinagem em 5-eixos será explorado com a finalidade de desenvolver conhecimentos a nível de programação CAM e manipulação/otimização de trajetórias de corte. A importância/funcionamento da transmissão de informação quer do pôs-processador para o controlador, quer do controlador para a máquina constituem também um ponto critico neste trabalho já que estão diretamente relacionados com a qualidade das peças produzidas. Para a realização de tal, foram pesquisados, estudados e explicados os fundamentos do conhecimento teórico relativamente ao trabalho de maquinagem CNC. Para além disso, o modelo da máquina em questão (HY-6040 5-axis CNC Router) foi meticulosamente analisado quanto à estrutura da máquina, pós-processador e controlador. Após reunir toda esta informação, e través da produção de peças teste, foi estabelecido um fluxo de trabalho de manufatura (CAD/CAM/Maquinagem) para diferentes abordagens de maquinagem

Micro-Electro Discharge Machining: Principles, Recent Advancements and Applications

Micro electrical discharge machining (micro-EDM) is a thermo-electric and contactless process most suited for micro-manufacturing and high-precision machining, especially when difficult-to-cut materials, such as super alloys, composites, and electro conductive ceramics, are processed. Many industrial domains exploit this technology to fabricate highly demanding components, such as high-aspect-ratio micro holes for fuel injectors, high-precision molds, and biomedical parts.Moreover, the continuous trend towards miniaturization and high precision functional components boosted the development of control strategies and optimization methodologies specifically suited to address the challenges in micro- and nano-scale fabrication.This Special Issue showcases 12 research papers and a review article focusing on novel methodological developments on several aspects of micro electrical discharge machining: machinability studies of hard materials (TiNi shape memory alloys, Si3N4–TiN ceramic composite, ZrB2-based ceramics reinforced with SiC fibers and whiskers, tungsten-cemented carbide, Ti-6Al-4V alloy, duplex stainless steel, and cubic boron nitride), process optimization adopting different dielectrics or electrodes, characterization of mechanical performance of processed surface, process analysis, and optimization via discharge pulse-type discrimination, hybrid processes, fabrication of molds for inflatable soft microactuators, and implementation of low-cost desktop micro-EDM system