Performance issues in optical burst/packet switching

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-01524-3_8This chapter summarises the activities on optical packet switching (OPS) and optical burst switching (OBS) carried out by the COST 291 partners in the last 4 years. It consists of an introduction, five sections with contributions on five different specific topics, and a final section dedicated to the conclusions. Each section contains an introductive state-of-the-art description of the specific topic and at least one contribution on that topic. The conclusions give some points on the current situation of the OPS/OBS paradigms

Cross-layer modeling and optimization of next-generation internet networks

Scaling traditional telecommunication networks so that they are able to cope with the volume of future traffic demands and the stringent European Commission (EC) regulations on emissions would entail unaffordable investments. For this very reason, the design of an innovative ultra-high bandwidth power-efficient network architecture is nowadays a bold topic within the research community. So far, the independent evolution of network layers has resulted in isolated, and hence, far-from-optimal contributions, which have eventually led to the issues today's networks are facing such as inefficient energy strategy, limited network scalability and flexibility, reduced network manageability and increased overall network and customer services costs. Consequently, there is currently large consensus among network operators and the research community that cross-layer interaction and coordination is fundamental for the proper architectural design of next-generation Internet networks. This thesis actively contributes to the this goal by addressing the modeling, optimization and performance analysis of a set of potential technologies to be deployed in future cross-layer network architectures. By applying a transversal design approach (i.e., joint consideration of several network layers), we aim for achieving the maximization of the integration of the different network layers involved in each specific problem. To this end, Part I provides a comprehensive evaluation of optical transport networks (OTNs) based on layer 2 (L2) sub-wavelength switching (SWS) technologies, also taking into consideration the impact of physical layer impairments (PLIs) (L0 phenomena). Indeed, the recent and relevant advances in optical technologies have dramatically increased the impact that PLIs have on the optical signal quality, particularly in the context of SWS networks. Then, in Part II of the thesis, we present a set of case studies where it is shown that the application of operations research (OR) methodologies in the desing/planning stage of future cross-layer Internet network architectures leads to the successful joint optimization of key network performance indicators (KPIs) such as cost (i.e., CAPEX/OPEX), resources usage and energy consumption. OR can definitely play an important role by allowing network designers/architects to obtain good near-optimal solutions to real-sized problems within practical running times

Joint path and resource selection for OBS grids with adaptive offset based QOS mechanism

Ankara : The Department of Electrical and Electronics Engineering and the Institute of Engineering and Sciences of Bilkent University, 2007.Thesis (Master's) -- Bilkent University, 2007.Includes bibliographical references leaves 71-76It is predicted that grid computing will be available for consumers performing their daily computational needs with the deployment of high bandwidth optical networks. Optical burst switching is a suitable switching technology for this kind of consumer grid networks because of its bandwidth granularity. However, high loss rates inherent in OBS has to be addressed to establish a reliable transmission infrastructure. In this thesis, we propose mechanisms to reduce loss rates in an OBS grid scenario by using network-aware resource selection and adaptive offset determination. We first propose a congestion-based joint resource and path selection algorithm. We show that path switching and network-aware resource selection can reduce burst loss probability and average completion time of grid jobs compared to the algorithms that are separately selecting paths and grid resources. In addition to joint resource and path selection, we present an adaptive offset algorithm for grid bursts which minimizes the average completion time. We show that the adaptive offset based QoS mechanism significantly reduces the job completion times by exploiting the trade-off between decreasing loss probability and increasing delay as a result of the extra offset time.Köseoğlu, MehmetM.S

Towards An Optimal Core Optical Network Using Overflow Channels

This dissertation is based on a traditional circuit switched core WDM network that is supplemented by a pool of wavelengths that carry optical burst switched overflow data. These overflow channels function to absorb channel overflows from traditional circuit switched networks and they also provide wavelengths for newer, high bandwidth applications. The channel overflows that appear at the overflow layer as optical bursts are either carried over a permanently configured, primary light path, or over a burst-switched, best-effort path while traversing the core network. At every successive hop along the best effort path, the optical bursts will attempt to enter a primary light path to its destination. Thus, each node in the network is a Hybrid Node that will provide entry for optical bursts to hybrid path that is made of a point to point, pre-provisioned light path or a burst switched path. The dissertation's main outcome is to determine the cost optimality of a Hybrid Route, to analyze cost-effectiveness of a Hybrid Node and compare it to a route and a node performing non-hybrid operation, respectively. Finally, an example network that consists of several Hybrid Routes and Hybrid Nodes is analyzed for its cost-effectiveness. Cost-effectiveness and optimality of a Hybrid Route is tested for its dependency on the mean and variance of channel demands offered to the route, the number of sources sharing the route, and the relative cost of a primary and overflow path called path cost ratio. An optimality condition that relates the effect of traffic statistics to the path cost ratio is analytically derived and tested. Cost-effectiveness of a Hybrid Node is compared among different switching fabric architecture that is used to construct the Hybrid Node. Broadcast-Select, Benes and Clos architectures are each considered with different degrees of chip integration. An example Hybrid Network that consists of several Hybrid Routes and Hybrid Nodes is found to be cost-effective and dependent of the ratio of switching to transport costs

A congestion aware ant colony optimisation-based routing and wavelength assignment algorithm for transparent flexi-grid optical burst switched networks

Optical Burst Switching (OBS) over transparent exi-grid optical networks, is considered a potential solution to the increasing pressure on backbone networks due to the increase in internet use and widespread adoption of various high bandwidth applications. Both technologies allow for more e cient usage of a networks resources. However, transmissions over exi-grid networks are more susceptible to optical impairments than transmissions made over xed-grid networks, and OBS suers from high burst loss due to contention. These issues need to be solved in order to reap the full benets of both technologies. An open issue for OBS whose solution would mitigate both issues is the Routing and Wavelength Assignment (RWA) algorithm. Ant Colony Optimisation (ACO) is a method of interest for solving the RWA problem on OBS networks. This study aims to improve on current dynamic ACO-based solutions to the Routing and Wavelength Assignment problem on transparent exi-grid Optical Burst Switched networks

Analytic modelling and resource dimensioning of optical burst switched networks

The realisation of optical network architectures may hold the key to delivering the enormous bandwidth demands of next generation Internet applications and services. Optical Burst Switching (OBS) is a potentially cost-effective switching technique that can satisfy these demands by offering a high bit rate transport service that is bandwidth-efficient under dynamic Internet traffic loads. Although various aspects of OBS performance have been extensively investigated, there remains a need to systematically assess the cost/performance trade-offs involved in dimensioning OBS switch resources in a network. This goal is essential in enabling the future deployment of OBS but poses a significant challenge due to the complexity of obtaining tractable mathematical models applicable to OBS network optimisation. The overall aim of this thesis lies within this challenge. This thesis firstly develops a novel analytic performance model of an OBS node where burst contention is resolved by combined use of Tuneable Wavelength Converters (TWCs) and Fibre Delay Lines (FDLs) connected in an efficient share-per-node configuration. The model uses a two-moment traffic representation that gives a good trade-off between accuracy and complexity, and is suitable for extension to use in network modelling. The OBS node model is then used to derive an approximate analytic model of an OBS network of switches equipped with TWCs and FDLs, again maintaining a two-moment traffic model for each end-to-end traffic path in the network. This allows evaluation of link/route loss rates under different offered traffic characteristics, whereas most OBS network models assume only a single-moment traffic representation. In the last part of this thesis, resource dimensioning of OBS networks is performed by solving single and multi-objective optimisation problems based on the analytic network model. The optimisation objectives relate to equipment cost minimisation and throughput maximisation under end-to-end loss rate constraints. Due to non-convexity of the network performance constraint equations, a search heuristic approach has been taken using a constraint-handling genetic algorithm

Accepted for Photonic Network Communications

Abstract-When deploying Grid infrastructure, the problem of dimensioning arises: how many servers to provide, where to place them, and which network to install for interconnecting server sites and users generating Grid jobs? In contrast to classical optical network design problems, it is typical of optical Grids that the destination of traffic (jobs) is not known beforehand. This leads to so-called anycast routing of jobs. For network dimensioning, this implies the absence of a clearly defined (source,destination)-based traffic matrix, since only the origin of Grid jobs (and their data) is known, but not their destination. The latter depends not only on the state of Grid resources, including network, storage, and computational resources, but also the Grid scheduling algorithm used. We present a phased solution approach to dimension all these resources, and use it to evaluate various scheduling algorithms in two European network case studies. Results show that the Grid scheduling algorithm has a substantial impact on the required network capacity. This capacity can be minimized by appropriately choosing a (reasonably small) number of server site locations: an optimal balance can be found, in between the single server site case requiring a lot of network traffic to this single location, and an overly fragmented distribution of server capacity over too many sites without much statistical multiplexing opportunities, and hence a relatively large probability of not finding free servers at nearby sites