Modeling and Propagation of Noisy Waveforms in Static Timing Analysis

A technique based on the sensitivity of the output to input waveform is presented for accurate propagation of delay information through a gate for the purpose of static timing analysis (STA) in the presence of noise. Conventional STA tools represent a waveform by its arrival time and slope. However, this is not an accurate way of modeling the waveform for the purpose of noise analysis. The key contribution of our work is the development of a method that allows efficient propagation of equivalent waveforms throughout the circuit. Experimental results demonstrate higher accuracy of the proposed sensitivity-based gate delay propagation technique, SGDP, compared to the best of existing approaches. SGDP is compatible with the current level of gate characterization in conventional ASIC cell libraries, and as a result, it can be easily incorporated into commercial STA tools to improve their accuracy.Comment: Submitted on behalf of EDAA (http://www.edaa.com/

Gate-level timing analysis and waveform evaluation

Static timing analysis (STA) is an integral part of modern VLSI chip design. Table lookup based methods are widely used in current industry due to its fast runtime and mature algorithms. Conventional STA algorithms based on table-lookup methods are developed under many assumptions in timing analysis; however, most of those assumptions, such as that input signals and output signals can be accurately modeled as ramp waveforms, are no longer satisfactory to meet the increasing demand of accuracy for new technologies. In this dissertation, we discuss several crucial issues that conventional STA has not taken into consideration, and propose new methods to handle these issues and show that new methods produce accurate results. In logic circuits, gates may have multiple inputs and signals can arrive at these inputs at different times and with different waveforms. Different arrival times and waveforms of signals can cause very different responses. However, multiple-input transition effects are totally overlooked by current STA tools. Using a conventional single-input transition model when multiple-input transition happens can cause significant estimation errors in timing analysis. Previous works on this issue focus on developing a complicated gate model to simulate the behavior of logic gates. These methods have high computational cost and have to make significant changes to the prevailing STA tools, and are thus not feasible in practice. This dissertation proposes a simplified gate model, uses transistor connection structures to capture the behavior of multiple-input transitions and requires no change to the current STA tools. Another issue with table lookup based methods is that the load of each gate in technology libraries is modeled as a single lumped capacitor. But in the real circuit, the Abstract 2 gate connects to its subsequent gates via metal wires. As the feature size of integrated circuit scales down, the interconnection cannot be seen as a simple capacitor since the resistive shielding effect will largely affect the equivalent capacitance seen from the gate. As the interconnection has numerous structures, tabulating the timing data for various interconnection structures is not feasible. In this dissertation, by using the concept of equivalent admittance, we reduce an arbitrary interconnection structure into an equivalent π-model RC circuit. Many previous works have mapped the π-model to an effective capacitor, which makes the table lookup based methods useful again. However, a capacitor cannot be equivalent to a π-model circuit, and will thus result in significant inaccuracy in waveform evaluation. In order to obtain an accurate waveform at gate output, a piecewise waveform evaluation method is proposed in this dissertation. Each part of the piecewise waveform is evaluated according to the gate characteristic and load structures. Another contribution of this dissertation research is a proposed equivalent waveform search method. The signal waveforms can be very complicated in the real circuits because of noises, race hazards, etc. The conventional STA only uses one attribute (i.e., transition time) to describe the waveform shape which can cause significant estimation errors. Our approach is to develop heuristic search functions to find equivalent ramps to approximate input waveforms. Here the transition time of a final ramp can be completely different from that of the original waveform, but we can get higher accuracy on output arrival time and transition time. All of the methods mentioned in this dissertation require no changes to the prevailing STA tools, and have been verified across different process technologies

Code-timing synchronization in DS-CDMA systems using space-time diversity

The synchronization of a desired user transmitting a known training sequence in a direct-sequence (DS) asynchronous code-division multiple-access (CDMA) sys-tem is addressed. It is assumed that the receiver consists of an arbitrary antenna array and works in a near-far, frequency-nonselective, slowly fading channel. The estimator that we propose is derived by applying the maximum likelihood (ML) principle to a signal model in which the contribution of all the interfering compo-nents (e.g., multiple-access interference, external interference and noise) is modeled as a Gaussian term with an unknown and arbitrary space-time correlation matrix. The main contribution of this paper is the fact that the estimator makes eÆcient use of the structure of the signals in both the space and time domains. Its perfor-mance is compared with the Cramer-Rao Bound, and with the performance of other methods proposed recently that also employ an antenna array but only exploit the structure of the signals in one of the two domains, while using the other simply as a means of path diversity. It is shown that the use of the temporal and spatial structures is necessary to achieve synchronization in heavily loaded systems or in the presence of directional external interference.Peer ReviewedPostprint (published version