On a Scalable Path for Multimode SDM Transmission

We investigate transceiver design and digital signal processing for spatially multiplexed transmission over multimode fibers. In conventional architectures, the full spatial domain of the transmission fiber has to be detected and processed such that the modal walk-off and mixture can be estimated and equalized. These architectures scale poorly with the number of modes supported, besides the sparsity of the fiber transfer matrix is not fully exploited. Instead, here we aim to employ selective mode vector launch and detection in order to minimize the number of optical front-ends required. In this case, an ideal basis for multiplexing is offered by principal modes, that to first order are frequency independent. We show that such mode vector basis can be used for full baud rate transmission over inter-data center distances despite limited coherence bandwidth and vulnerability to environmental-induced drift of the optical channel. It is shown that crosstalk at the receiver front-end can be significantly suppressed, critically reducing the number of coherent receiver front-ends to that of spatial tributaries aimed for data transmission - as opposed to the total number of fiber modes. Residual crosstalk can still be experienced due to environmental-induced channel drift and loss of orthogonality in presence of mode dependent loss. Multiple-input single-output digital signal processing is shown to be effective in this case, with the required equalizer array size scaling sub-linearly with the number of tributaries. A multimode fiber with 156 spatial and polarization modes and optimized for low modal dispersion is considered

Holographic mode-selective launch for bandwidth enhancement in multimode fiber

With rapidly growing bandwidth demands in Local Area Networks, it is imperative to support next generation speeds beyond 40Gbit/s.Various holographic optimization techniques using spatial light modulators have recently been explored for adaptive channel impulse response improvement of MMF links. Most of these experiments are algorithmic-oriented. In this paper, a set of lenses and a spatial light modulator, acting as a binary amplitude filter, played the pivotal role in generating the input modal electric field into a graded-index MMF, rather than algorithms. By using a priori theoretical information to generate the incident modal electric field at the MMF, the bandwidth was increased by up to 3.4 times

Long distance transmission in few-mode fibers

Using multimode fibers for long-haul transmission is proposed and demonstrated experimentally. In particular few-mode fibers (FMFs) are demonstrated as a good compromise since they are sufficiently resistant to mode coupling compared to standard multimode fibers but they still can have large core diameters compared to single-mode fibers. As a result these fibers can have significantly less nonlinearity and at the same time they can have the same performance as single-mode fibers in terms of dispersion and loss. In the absence of mode coupling it is possible to use these fibers in the single-mode operation where all the data is carried in only one of the spatial modes throughout the fiber. It is shown experimentally that the single-mode operation is achieved simply by splicing single-mode fibers to both ends of a 35-km-long dual-mode fiber at 1310 nm. After 35 km of transmission, no modal dispersion or excess loss was observed. Finally the same fiber is placed in a recirculating loop and 3 WDM channels each carrying 6 Gb/s BPSK data were transmitted through 1050 km of the few-mode fiber without modal dispersion

Multidiameter optical ring and Hermite–Gaussian vortices for wavelength division multiplexing–mode division multiplexing

Optical vortices are high-capacity data carriers for mode division multiplexing (MDM) in multimode fiber (MMF). This paper reports on the MDM of a combination of helical-phased optical vortices comprising donut modes and Hermite–Gaussian (HG) modes for different radial offsets from the MMF axis. A data rate of 44 Gbps is achieved for wavelength division multiplexing–MDM of two pairs of helical-phased donut mode and HG mode at wavelengths 1550.12 and 1551.72 nm for a MMF length of 1500 m

Longer Wavelength GaAs-Based VCSELs for Extended-Reach Optical Interconnects

Data centers of today are increasing in size and are built to accommodate strong traffic demands while providing sustainably by having clients sharing resources under one roof. Their massive scale puts pressure on the server network topology and has incited a need for data transmission links that are energy efficient and capable of operation at high bit rates with reach up to a few kilometers. Optical interconnects (OIs) offer large bandwidth and low attenuation at long distances, and are therefore suitable for this task. The most commonly used OIs, with 850 nm GaAs-based vertical-cavity surface-emitting lasers (VCSELs) and multi-mode fiber (MMF), have a 25 Gb/s reach that is limited to a few hundred meters. However, the fiber chromatic dispersion and attenuation that limit the OI reach can be reduced significantly by increasing the wavelength of this very same technology. The upper limit of the GaAs-based VCSEL technology, with strained InGaAs quantum wells (QWs), is about 1100 nm.With further improved OI performance, new hyperscale data center topologies can be realized and explored. This will lead to a larger number of possible solutions in traffic engineering as well as for power management. 1060 nm VCSELs could soon open up for lane rates of 100+ Gb/s over distances up to 2 km and help reach the Tb/s link speed aim of data center OI standards, in which capacity is built up mainly by employing multiple parallel lanes, increasing symbol rate by going from binary to four-level pulse amplitude modulation (PAM-4), and optimizing with electrical mitigation techniques such as digital signal processing.In this work we show that 1060 nm GaAs VCSELs are suitable light sources for long-reach OIs by first demonstrating their overall stable performance and capability of error-free data transmission up to 50 Gb/s back-to-back and 25 Gb/s over 1 km of MMF. With PAM-4, we show 100 Gb/s error-free capability over 100 m of MMF, suitable for wavelength division multiplexed OIs that can transmit data at several wavelengths from 850 to 1060 nm over the same fiber channel. We also assemble single-mode 1060 nm VCSEL and single-mode fiber links and demonstrate 50 Gb/s error-free transmission over 1 km using pre-emphasis and 40 Gb/s over 2 km without the use of any electrical mitigation techniques. These results stem from careful VCSEL design, including strained InGaAs QWs with GaAsP barriers, doped AlGaAs distributed Bragg reflectors, a short optical cavity and multiple oxide layers. In addition, we show that the fabrication of such a device poses no increase in complexity and can be realized using standard processing techniques

Binary encoded computer generated holograms for temporal phase shifting

The trend towards real-time optical applications predicates the need for real-time interferometry.For real-time interferometric applications, rapid processing of computer generated holograms is crucial as the intractability of rapid phase changes may compromise the input to the system. This paper introduces the design of a set of binary encoded computer generated holograms (CGHs) for real-time five-frame temporal phase shifting interferometry using a binary amplitude spatial light modulator.It is suitable for portable devices with constraints in computational power. The new set of binary encoded CGHs is used for measuring the phase of the generated electric field for a real-time selective launch in multimode fiber. The processing time for the new set of CGHs was reduced by up to 65% relative to the original encoding scheme.The results obtained from the new interferometric technique are in good agreement with the results obtained by phase shifting by means of a piezo driven flat mirror