Mobile Robots Navigation

Mobile robots navigation includes different interrelated activities: (i) perception, as obtaining and interpreting sensory information; (ii) exploration, as the strategy that guides the robot to select the next direction to go; (iii) mapping, involving the construction of a spatial representation by using the sensory information perceived; (iv) localization, as the strategy to estimate the robot position within the spatial map; (v) path planning, as the strategy to find a path towards a goal location being optimal or not; and (vi) path execution, where motor actions are determined and adapted to environmental changes. The book addresses those activities by integrating results from the research work of several authors all over the world. Research cases are documented in 32 chapters organized within 7 categories next described

Enhancing 3D Visual Odometry with Single-Camera Stereo Omnidirectional Systems

We explore low-cost solutions for efficiently improving the 3D pose estimation problem of a single camera moving in an unfamiliar environment. The visual odometry (VO) task -- as it is called when using computer vision to estimate egomotion -- is of particular interest to mobile robots as well as humans with visual impairments. The payload capacity of small robots like micro-aerial vehicles (drones) requires the use of portable perception equipment, which is constrained by size, weight, energy consumption, and processing power. Using a single camera as the passive sensor for the VO task satisfies these requirements, and it motivates the proposed solutions presented in this thesis. To deliver the portability goal with a single off-the-shelf camera, we have taken two approaches: The first one, and the most extensively studied here, revolves around an unorthodox camera-mirrors configuration (catadioptrics) achieving a stereo omnidirectional system (SOS). The second approach relies on expanding the visual features from the scene into higher dimensionalities to track the pose of a conventional camera in a photogrammetric fashion. The first goal has many interdependent challenges, which we address as part of this thesis: SOS design, projection model, adequate calibration procedure, and application to VO. We show several practical advantages for the single-camera SOS due to its complete 360-degree stereo views, that other conventional 3D sensors lack due to their limited field of view. Since our omnidirectional stereo (omnistereo) views are captured by a single camera, a truly instantaneous pair of panoramic images is possible for 3D perception tasks. Finally, we address the VO problem as a direct multichannel tracking approach, which increases the pose estimation accuracy of the baseline method (i.e., using only grayscale or color information) under the photometric error minimization as the heart of the “direct” tracking algorithm. Currently, this solution has been tested on standard monocular cameras, but it could also be applied to an SOS. We believe the challenges that we attempted to solve have not been considered previously with the level of detail needed for successfully performing VO with a single camera as the ultimate goal in both real-life and simulated scenes

Application of computer vision for roller operation management

Compaction is the last and possibly the most important phase in construction of asphalt concrete (AC) pavements. Compaction densifies the loose (AC) mat, producing a stable surface with low permeability. The process strongly affects the AC performance properties. Too much compaction may cause aggregate degradation and low air void content facilitating bleeding and rutting. On the other hand too little compaction may result in higher air void content facilitating oxidation and water permeability issues, rutting due to further densification by traffic and reduced fatigue life. Therefore, compaction is a critical issue in AC pavement construction.;The common practice for compacting a mat is to establish a roller pattern that determines the number of passes and coverages needed to achieve the desired density. Once the pattern is established, the roller\u27s operator must maintain the roller pattern uniformly over the entire mat.;Despite the importance of uniform compaction to achieve the expected durability and performance of AC pavements, having the roller operator as the only mean to manage the operation can involve human errors.;With the advancement of technology in recent years, the concept of intelligent compaction (IC) was developed to assist the roller operators and improve the construction quality. Commercial IC packages for construction rollers are available from different manufacturers. They can provide precise mapping of a roller\u27s location and provide the roller operator with feedback during the compaction process.;Although, the IC packages are able to track the roller passes with impressive results, there are also major hindrances. The high cost of acquisition and potential negative impact on productivity has inhibited implementation of IC.;This study applied computer vision technology to build a versatile and affordable system to count and map roller passes. An infrared camera is mounted on top of the roller to capture the operator view. Then, in a near real-time process, image features were extracted and tracked to estimate the incremental rotation and translation of the roller. Image featured are categorized into near and distant features based on the user defined horizon. The optical flow is estimated for near features located in the region below the horizon. The change in roller\u27s heading is constantly estimated from the distant features located in the sky region. Using the roller\u27s rotation angle, the incremental translation between two frames will be calculated from the optical flow. The roller\u27s incremental rotation and translation will put together to develop a tracking map.;During system development, it was noted that in environments with thermal uniformity, the background of the IR images exhibit less featured as compared to images captured with optical cameras which are insensitive to temperature. This issue is more significant overnight, since nature elements are not able to reflect the heat energy from sun. Therefore to improve roller\u27s heading estimation where less features are available in the sky region a unique methodology that allows heading detection based on the asphalt mat edges was developed for this research. The heading measurements based on the slope of the asphalt hot edges will be added to the pool of the headings measured from sky region. The median of all heading measurements will be used as the incremental roller\u27s rotation for the tracking analysis.;The record of tracking data is used for QC/QA purposes and verifying the proper implementation of the roller pattern throughout a job constructed under the roller pass specifications.;The system developed during this research was successful in mapping roller location for few projects tested. However the system should be independently validated

Non-Metrical Navigation Through Visual Path Control

We describe a new method for wide-area, non-metrical robot navigationwhich enables useful, purposeful motion indoors. Our method has twophases: a training phase, in which a human user directs a wheeledrobot with an attached camera through an environment while occasionallysupplying textual place names; and a navigation phase in which theuser specifies goal place names (again as text), and the robot issueslow-level motion control in order to move to the specified place. We show thatdifferences in the visual-field locations and scales of features matched acrosstraining and navigation can be used to construct a simple and robust controlrule that guides the robot onto and along the training motion path.Our method uses an omnidirectional camera, requires approximateintrinsic and extrinsic camera calibration, and is capable of effective motioncontrol within an extended, minimally-prepared building environment floorplan.We give results for deployment within a single building floor with 7 rooms, 6corridor segments, and 15 distinct place names

CARLA-Loc: Synthetic SLAM Dataset with Full-stack Sensor Setup in Challenging Weather and Dynamic Environments

The robustness of SLAM algorithms in challenging environmental conditions is crucial for autonomous driving, but the impact of these conditions are unknown while given the difficulty of arbitrarily changing the relevant environmental parameters of the same environment in the real world. Therefore, we propose CARLA-Loc, a synthetic dataset of challenging and dynamic environments built on CARLA simulator. We integrate multiple sensors into the dataset with strict calibration, synchronization and precise timestamping. 7 maps and 42 sequences are posed in our dataset with different dynamic levels and weather conditions. Objects in both stereo images and point clouds are well-segmented with their class labels. We evaluate 5 visual-based and 4 LiDAR-based approaches on varies sequences and analyze the effect of challenging environmental factors on the localization accuracy, showing the applicability of proposed dataset for validating SLAM algorithms

Single and multiple stereo view navigation for planetary rovers

© Cranfield UniversityThis thesis deals with the challenge of autonomous navigation of the ExoMars rover. The absence of global positioning systems (GPS) in space, added to the limitations of wheel odometry makes autonomous navigation based on these two techniques - as done in the literature - an inviable solution and necessitates the use of other approaches. That, among other reasons, motivates this work to use solely visual data to solve the robot’s Egomotion problem. The homogeneity of Mars’ terrain makes the robustness of the low level image processing technique a critical requirement. In the first part of the thesis, novel solutions are presented to tackle this specific problem. Detection of robust features against illumination changes and unique matching and association of features is a sought after capability. A solution for robustness of features against illumination variation is proposed combining Harris corner detection together with moment image representation. Whereas the first provides a technique for efficient feature detection, the moment images add the necessary brightness invariance. Moreover, a bucketing strategy is used to guarantee that features are homogeneously distributed within the images. Then, the addition of local feature descriptors guarantees the unique identification of image cues. In the second part, reliable and precise motion estimation for the Mars’s robot is studied. A number of successful approaches are thoroughly analysed. Visual Simultaneous Localisation And Mapping (VSLAM) is investigated, proposing enhancements and integrating it with the robust feature methodology. Then, linear and nonlinear optimisation techniques are explored. Alternative photogrammetry reprojection concepts are tested. Lastly, data fusion techniques are proposed to deal with the integration of multiple stereo view data. Our robust visual scheme allows good feature repeatability. Because of this, dimensionality reduction of the feature data can be used without compromising the overall performance of the proposed solutions for motion estimation. Also, the developed Egomotion techniques have been extensively validated using both simulated and real data collected at ESA-ESTEC facilities. Multiple stereo view solutions for robot motion estimation are introduced, presenting interesting benefits. The obtained results prove the innovative methods presented here to be accurate and reliable approaches capable to solve the Egomotion problem in a Mars environment