Employing H.264 Coarse and Medium Grain Scalable Video to Optimize Video Playback over Passive Optical Networks

In this work, we propose the use of Coarse Grain Scalable (CGS) and Medium Grain Scalable (MGS) H.264/AVC video to optimize video playback on passive optical networks (PONs) by investigating network performance metrics such as data delay, video delay, and video delay jitter. Video playback is improved by sequentially dropping layers of scalable video. Dropping just a single CGS enhancement layer results in improvements of up to 57% for both data and video delay. However, video delay jitter benefits the most with an improvement ranging from 47% to 87%. Surprisingly, dropping subsequent CGS enhancement layers does not significantly improve the PONs performance. In order to remedy this effect, our focus switched to employing the H.264/AVC MGS video standard. Though video traffic delay is the primary object of optimization in this work, the proposed algorithm’s impacts on other network performance metrics such as data traffic delay and video traffic delay variance (jitter) are analyzed as well. Video playback is improved by employing an adaptive scalable video layer dropping algorithm which drops a progressively larger number of scalable video layers as network utilization increases as measured by the moving average of the video packet delay. The influence of the algorithm\u27s three parameters on its performance is investigated in detail, and the results of the optimized adaptive dropping algorithm are compared to baseline static dropping algorithm

Multimedia delivery in the future internet

The term “Networked Media” implies that all kinds of media including text, image, 3D graphics, audio and video are produced, distributed, shared, managed and consumed on-line through various networks, like the Internet, Fiber, WiFi, WiMAX, GPRS, 3G and so on, in a convergent manner [1]. This white paper is the contribution of the Media Delivery Platform (MDP) cluster and aims to cover the Networked challenges of the Networked Media in the transition to the Future of the Internet. Internet has evolved and changed the way we work and live. End users of the Internet have been confronted with a bewildering range of media, services and applications and of technological innovations concerning media formats, wireless networks, terminal types and capabilities. And there is little evidence that the pace of this innovation is slowing. Today, over one billion of users access the Internet on regular basis, more than 100 million users have downloaded at least one (multi)media file and over 47 millions of them do so regularly, searching in more than 160 Exabytes1 of content. In the near future these numbers are expected to exponentially rise. It is expected that the Internet content will be increased by at least a factor of 6, rising to more than 990 Exabytes before 2012, fuelled mainly by the users themselves. Moreover, it is envisaged that in a near- to mid-term future, the Internet will provide the means to share and distribute (new) multimedia content and services with superior quality and striking flexibility, in a trusted and personalized way, improving citizens’ quality of life, working conditions, edutainment and safety. In this evolving environment, new transport protocols, new multimedia encoding schemes, cross-layer inthe network adaptation, machine-to-machine communication (including RFIDs), rich 3D content as well as community networks and the use of peer-to-peer (P2P) overlays are expected to generate new models of interaction and cooperation, and be able to support enhanced perceived quality-of-experience (PQoE) and innovative applications “on the move”, like virtual collaboration environments, personalised services/ media, virtual sport groups, on-line gaming, edutainment. In this context, the interaction with content combined with interactive/multimedia search capabilities across distributed repositories, opportunistic P2P networks and the dynamic adaptation to the characteristics of diverse mobile terminals are expected to contribute towards such a vision. Based on work that has taken place in a number of EC co-funded projects, in Framework Program 6 (FP6) and Framework Program 7 (FP7), a group of experts and technology visionaries have voluntarily contributed in this white paper aiming to describe the status, the state-of-the art, the challenges and the way ahead in the area of Content Aware media delivery platforms

A Multimedia Delivery System for Delay-/Disruption-Tolerant Networks

Abstract-Multimedia delivery systems and protocols usually assume end-to-end connections and low delivery delays between multimedia sources and consumers. However, neither of these two properties can always be achieved in hastily formed networks for emergency response operations. In particular, disruptions may break end-to-end connections, which makes it impossible to deliver multimedia content instantly. This work presents a multimedia delivery system that can operate in disrupted networks and hence may help improve the situational awareness in emergency response operations. The multimedia delivery system is based on HTTP adaptive streaming (HAS) and uses a modified version of HTTP which is able to deliver data in partitioned networks. The multimedia delivery system is evaluated in a realistic emergency response scenario

Towards video streaming in IoT environments: vehicular communication perspective

Multimedia oriented Internet of Things (IoT) enables pervasive and real-time communication of video, audio and image data among devices in an immediate surroundings. Today's vehicles have the capability of supporting real time multimedia acquisition. Vehicles with high illuminating infrared cameras and customized sensors can communicate with other on-road devices using dedicated short-range communication (DSRC) and 5G enabled communication technologies. Real time incidence of both urban and highway vehicular traffic environment can be captured and transmitted using vehicle-to-vehicle and vehicle-to-infrastructure communication modes. Video streaming in vehicular IoT (VSV-IoT) environments is in growing stage with several challenges that need to be addressed ranging from limited resources in IoT devices, intermittent connection in vehicular networks, heterogeneous devices, dynamism and scalability in video encoding, bandwidth underutilization in video delivery, and attaining application-precise quality of service in video streaming. In this context, this paper presents a comprehensive review on video streaming in IoT environments focusing on vehicular communication perspective. Specifically, significance of video streaming in vehicular IoT environments is highlighted focusing on integration of vehicular communication with 5G enabled IoT technologies, and smart city oriented application areas for VSV-IoT. A taxonomy is presented for the classification of related literature on video streaming in vehicular network environments. Following the taxonomy, critical review of literature is performed focusing on major functional model, strengths and weaknesses. Metrics for video streaming in vehicular IoT environments are derived and comparatively analyzed in terms of their usage and evaluation capabilities. Open research challenges in VSV-IoT are identified as future directions of research in the area. The survey would benefit both IoT and vehicle industry practitioners and researchers, in terms of augmenting understanding of vehicular video streaming and its IoT related trends and issues

Video Caching, Analytics and Delivery at the Wireless Edge: A Survey and Future Directions

Future wireless networks will provide high bandwidth, low-latency, and ultra-reliable Internet connectivity to meet the requirements of different applications, ranging from mobile broadband to the Internet of Things. To this aim, mobile edge caching, computing, and communication (edge-C3) have emerged to bring network resources (i.e., bandwidth, storage, and computing) closer to end users. Edge-C3 allows improving the network resource utilization as well as the quality of experience (QoE) of end users. Recently, several video-oriented mobile applications (e.g., live content sharing, gaming, and augmented reality) have leveraged edge-C3 in diverse scenarios involving video streaming in both the downlink and the uplink. Hence, a large number of recent works have studied the implications of video analysis and streaming through edge-C3. This article presents an in-depth survey on video edge-C3 challenges and state-of-the-art solutions in next-generation wireless and mobile networks. Specifically, it includes: a tutorial on video streaming in mobile networks (e.g., video encoding and adaptive bitrate streaming); an overview of mobile network architectures, enabling technologies, and applications for video edge-C3; video edge computing and analytics in uplink scenarios (e.g., architectures, analytics, and applications); and video edge caching, computing and communication methods in downlink scenarios (e.g., collaborative, popularity-based, and context-aware). A new taxonomy for video edge-C3 is proposed and the major contributions of recent studies are first highlighted and then systematically compared. Finally, several open problems and key challenges for future research are outlined

QOE-AWARE CONTENT DISTRIBUTION SYSTEMS FOR ADAPTIVE BITRATE VIDEO STREAMING

A prodigious increase in video streaming content along with a simultaneous rise in end system capabilities has led to the proliferation of adaptive bit rate video streaming users in the Internet. Today, video streaming services range from Video-on-Demand services like traditional IP TV to more recent technologies such as immersive 3D experiences for live sports events. In order to meet the demands of these services, the multimedia and networking research community continues to strive toward efficiently delivering high quality content across the Internet while also trying to minimize content storage and delivery costs. The introduction of flexible and adaptable technologies such as compute and storage clouds, Network Function Virtualization and Software Defined Networking continue to fuel content provider revenue. Today, content providers such as Google and Facebook build their own Software-Defined WANs to efficiently serve millions of users worldwide, while NetFlix partners with ISPs such as ATT (using OpenConnect) and cloud providers such as Amazon EC2 to serve their content and manage the delivery of several petabytes of high-quality video content for millions of subscribers at a global scale, respectively. In recent years, the unprecedented growth of video traffic in the Internet has seen several innovative systems such as Software Defined Networks and Information Centric Networks as well as inventive protocols such as QUIC, in an effort to keep up with the effects of this remarkable growth. While most existing systems continue to sub-optimally satisfy user requirements, future video streaming systems will require optimal management of storage and bandwidth resources that are several orders of magnitude larger than what is implemented today. Moreover, Quality-of-Experience metrics are becoming increasingly fine-grained in order to accurately quantify diverse content and consumer needs. In this dissertation, we design and investigate innovative adaptive bit rate video streaming systems and analyze the implications of recent technologies on traditional streaming approaches using real-world experimentation methods. We provide useful insights for current and future content distribution network administrators to tackle Quality-of-Experience dilemmas and serve high quality video content to several users at a global scale. In order to show how Quality-of-Experience can benefit from core network architectural modifications, we design and evaluate prototypes for video streaming in Information Centric Networks and Software-Defined Networks. We also present a real-world, in-depth analysis of adaptive bitrate video streaming over protocols such as QUIC and MPQUIC to show how end-to-end protocol innovation can contribute to substantial Quality-of-Experience benefits for adaptive bit rate video streaming systems. We investigate a cross-layer approach based on QUIC and observe that application layer-based information can be successfully used to determine transport layer parameters for ABR streaming applications

A scheme for efficient peer-to-peer live video streaming over wireless mesh networks

Peers in a Peer-to-Peer (P2P) live video streaming system over hybrid wireless mesh networks (WMNs) enjoy high video quality when both random network coding (RNC) and an efficient hybrid routing protocol are employed. Although RNC is the most recently used method of efficient video streaming, it imposes high transmission overhead and decoding computational complexity on the network which reduces the perceived video quality. Besides that, RNC cannot guaranty a non-existence of linear dependency in the generated coefficients matrix. In WMNs, node mobility has not been efficiently addressed by current hybrid routing protocols that increase video distortion which would lead to low video quality. In addition, these protocols cannot efficiently support nodes which operate in infrastructure mode. Therefore, the purpose of this research is to propose a P2P live video streaming scheme which consists of two phases followed by the integration of these two phases known as the third phase to provide high video quality in hybrid WMNs. In the first phase, a novel coefficients matrix generation and inversion method has been proposed to address the mentioned limitations of RNC. In the second phase, the proposed enhanced hybrid routing protocol was used to efficiently route video streams among nodes using the most stable path with low routing overhead. Moreover, this protocol effectively supports mobility and nodes which operate in infrastructure mode by exploiting the advantages of the designed locator service. Results of simulations from the first phase showed that video distortion as the most important performance metric in live video streaming, had improved by 36 percent in comparison with current RNC method which employs the Gauss-Jordan Elimination (RNC-GJE) method in decoding. Other metrics including frame dependency distortion, initial start-up delay and end-to-end delay have also improved using the proposed method. Based on previous studies, although Reactive (DYMO) routing protocol provides better performance than other existing routing protocols in a hybrid WMN, the proposed protocol in the second phase had average improvements in video distortion of l86% for hybrid wireless mesh protocol (HWMP), 49% for Reactive (Dynamic MANET On-Demand-DYMO), 75% for Proactive (Optimized Link State Routing-OLSR), and 60% for Ad-hoc on-demand Distance Vector Spanning-Tree (AODV-ST). Other metrics including end-to-end delay, packet delay variation, routing overhead and number of delivered video frames have also improved using the proposed protocol. Finally, the third phase, an integration of the first two phases has proven to be an efficient scheme for high quality P2P live video streaming over hybrid WMNs. This video streaming scheme had averagely improved video distortion by 41%, frame dependency distortion by 50%, initial start-up delay by 15% and end-to-end delay by 33% in comparison with the average introduced values by three other considered integration cases which are Reactive and RNC-GJE, Reactive and the first phase, the second phase and RNC-GJE

Peer-to-peer television for the IP multimedia subsystem

Peer-to-peer (P2P) video streaming has generated a significant amount of interest in both the research community and the industry, which find it a cost-effective solution to the user scalability problem. However, despite the success of Internet-based applications, the adoption has been limited for commercial services, such as Internet Protocol Television (IPTV). With the advent of the next-generation-networks (NGN) based on the IP Multimedia Subsystem (IMS), advocating for an open and inter-operable architecture, P2P emerges as a possible alternative in situations where the traditional mechanisms are not possible or economically feasible. This work proposes a P2P IPTV architecture for an IMS-based NGN, called P2PTV, which allows one or more service providers to use a common P2P infrastructure for streaming the TV channels to their subscribers. Instead of using servers, we rely on the uploading capabilities of the user equipments, like set-top boxes, located at the customers’ premise. We comply with the existing IMS and IPTV standards from the 3rd Generation Partnership Project (3GPP) and the Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) bodies, where a centralized P2PTV application server (AS) manages the customer access to the service and the peer participation. Because watching TV is a complex and demanding user activity, we face two significant challenges. The first is to accommodate the mandatory IMS signaling, which reserves in the network the necessary QoS resources during every channel change, establishing a multimedia session between communicating peers. The second is represented by the streaming interruptions, or churn, when the uploading peer turns off or changes its current TV channel. To tackle these problems, we propose two enhancements. A fast signaling method, which uses inactive uploading sessions with reserved but unused QoS, to improve the tuning delay for new channel users. At every moment, the AS uses a feedback based algorithm to compute the number of necessary sessions that accommodates well the demand, while preventing the over-reservation of resources. We approach with special care mobility situations, where a proactive transfer of the multimedia session context using the IEEE 802.21 standard offers the best alternative to current methods. The second enhancement addresses the peer churn during channel changes. With every TV channel divided into a number of streams, we enable peers to download and upload streams different from their current channel, increasing the stability of their participation. Unlike similar work, we benefit from our estimation of the user demand and propose a decentralized method for a balanced assignment of peer bandwidth. We evaluate the performance of the P2PTV through modeling and large-scale computer simulations. A simpler experimental setting, with pure P2P streaming, indicates the improvements over the delay and peer churn. In more complex scenarios, especially with resource-poor peers having a limited upload capacity, we envision P2P as a complementary solution to traditional approaches like IP multicast. Reserving P2P for unpopular TV channels exploits the peer capacity and prevents the necessity of a large number of sparsely used multicast trees. Future work may refine the AS algorithms, address different experimental scenarios, and extend the lessons learned to non-IMS networks. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------La transmisión de vídeo con tecnologías peer-to-peer (P2P) ha generado un gran interés, tanto en la industria como en la comunidad científica, quienes han encontrado en dicha unión la solución para afrontar los problemas de escalabilidad de la transmisión de vídeo, reduciendo al mismo tiempo sus costes. A pesar del éxito de estos mecanismos en Internet, la transmisión de vídeo mediante técnicas P2P no se ha utilizado en servicios comerciales como puede ser el de televisión por IP (IPTV). Con la aparición de propuestas de redes de próxima generación basadas en el IP Multimedia Subsystem (IMS), que permite una arquitectura abierta e interoperable, los mecanismos basados en P2P emergen como posibles alternativas en situaciones donde los mecanismos tradicionales de transmisión de vídeo no se pueden desplegar o no son económicamente viables. Esta tesis propone una arquitectura de servicio de televisión peer-to-peer para una red de siguiente generación basada en IMS, que abreviaremos como P2PTV, que permite a uno o más proveedores de servicio utilizar una infraestructura P2P común para la transmisión de canales de TV a sus suscriptores. En vez de utilizar varios servidores, proponemos utilizar la capacidad de envío de los equipos de usuario, como los set-top boxes, localizados en el lado del cliente. En esta tesis extendemos los trabajos de estandarización sobre IMS IPTV de los organismos 3rd Generation Partnership Project (3GPP) y del Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN), donde un servidor de aplicación (AS) central de P2PTV administra el acceso de los clientes al servicio y permite compartir los recursos de los equipos. Debido a que el acceso a los canales de TV por parte de los usuarios es una actividad compleja, nos enfrentamos a dos retos importantes. El primero es administrar la señalización de IMS, con la cual se reservan los recursos de QoS necesarios durante cada cambio de canal, estableciendo una sesión multimedia entre los diferentes elementos de la comunicación. El segundo está representado por las interrupciones de la reproducción de video, causado por los equipos que sirven dicho vídeo cuando estos se desconectan del sistema o cuando cambian de canal. Para afrontar estos retos, proponemos dos mejoras al sistema. La primera mejora introduce el método de señalización rápida, en la cual se utilizan sesiones multimedia inactivas pero con recursos reservados para acelerar las conexiones entre usuarios. En cada momento, el AS utiliza la información extraída del algoritmo propuesto, que calcula el número de sesiones necesarias para administrar la demanda de conexiones, pero sin realizar una sobre-estimación, manteniendo bajo el uso de los recursos. Hemos abordado con especial cuidado la movilidad de los usuarios, donde se ha propuesto una transferencia de sesión pro-activa utilizando el estándar IEEE 802.21, el cual brinda una mejor alternativa que los métodos propuestos hasta la fecha. La segunda mejora se enfoca en las desconexiones de usuarios durante cambios de canal. Dividiendo los canales de TV en varios segmentos, permitimos a los equipos descargar o enviar diferentes partes de cualquier canal, aumentando la estabilidad de su participación. A diferencia de otros trabajos, nuestra propuesta se beneficia de la estimación de la demanda futura de los usuarios, proponiendo un método descentralizado para una asignación balanceada del ancho de banda de los equipos. Hemos evaluado el rendimiento del sistema P2PTV a través de modelado y de simulaciones de ordenador en sistemas IPTV de gran escala. Una configuración simple, con envío P2P puro, indica mejoras en el retardo y número de desconexiones de usuarios. En escenarios más complejos, especialmente con equipos con pocos recursos en la subida, sugerimos el uso de P2P como una solución complementaria a las soluciones tradicionales de multicast IP. Reservando el uso de P2P para los canales de TV poco populares, se permite explotar los recursos de los equipos y se previene la necesidad de un alto número de árboles multicast dispersos. Como trabajo futuro, se propone refinar los algoritmos del AS, abordar diferentes escenarios experimentales y también extender las lecciones aprendidas en esta tesis a otros sistemas no basados en IMS

QoE on media deliveriy in 5G environments

231 p.5G expandirá las redes móviles con un mayor ancho de banda, menor latencia y la capacidad de proveer conectividad de forma masiva y sin fallos. Los usuarios de servicios multimedia esperan una experiencia de reproducción multimedia fluida que se adapte de forma dinámica a los intereses del usuario y a su contexto de movilidad. Sin embargo, la red, adoptando una posición neutral, no ayuda a fortalecer los parámetros que inciden en la calidad de experiencia. En consecuencia, las soluciones diseñadas para realizar un envío de tráfico multimedia de forma dinámica y eficiente cobran un especial interés. Para mejorar la calidad de la experiencia de servicios multimedia en entornos 5G la investigación llevada a cabo en esta tesis ha diseñado un sistema múltiple, basado en cuatro contribuciones.El primer mecanismo, SaW, crea una granja elástica de recursos de computación que ejecutan tareas de análisis multimedia. Los resultados confirman la competitividad de este enfoque respecto a granjas de servidores. El segundo mecanismo, LAMB-DASH, elige la calidad en el reproductor multimedia con un diseño que requiere una baja complejidad de procesamiento. Las pruebas concluyen su habilidad para mejorar la estabilidad, consistencia y uniformidad de la calidad de experiencia entre los clientes que comparten una celda de red. El tercer mecanismo, MEC4FAIR, explota las capacidades 5G de analizar métricas del envío de los diferentes flujos. Los resultados muestran cómo habilita al servicio a coordinar a los diferentes clientes en la celda para mejorar la calidad del servicio. El cuarto mecanismo, CogNet, sirve para provisionar recursos de red y configurar una topología capaz de conmutar una demanda estimada y garantizar unas cotas de calidad del servicio. En este caso, los resultados arrojan una mayor precisión cuando la demanda de un servicio es mayor

QoE on media deliveriy in 5G environments

231 p.5G expandirá las redes móviles con un mayor ancho de banda, menor latencia y la capacidad de proveer conectividad de forma masiva y sin fallos. Los usuarios de servicios multimedia esperan una experiencia de reproducción multimedia fluida que se adapte de forma dinámica a los intereses del usuario y a su contexto de movilidad. Sin embargo, la red, adoptando una posición neutral, no ayuda a fortalecer los parámetros que inciden en la calidad de experiencia. En consecuencia, las soluciones diseñadas para realizar un envío de tráfico multimedia de forma dinámica y eficiente cobran un especial interés. Para mejorar la calidad de la experiencia de servicios multimedia en entornos 5G la investigación llevada a cabo en esta tesis ha diseñado un sistema múltiple, basado en cuatro contribuciones.El primer mecanismo, SaW, crea una granja elástica de recursos de computación que ejecutan tareas de análisis multimedia. Los resultados confirman la competitividad de este enfoque respecto a granjas de servidores. El segundo mecanismo, LAMB-DASH, elige la calidad en el reproductor multimedia con un diseño que requiere una baja complejidad de procesamiento. Las pruebas concluyen su habilidad para mejorar la estabilidad, consistencia y uniformidad de la calidad de experiencia entre los clientes que comparten una celda de red. El tercer mecanismo, MEC4FAIR, explota las capacidades 5G de analizar métricas del envío de los diferentes flujos. Los resultados muestran cómo habilita al servicio a coordinar a los diferentes clientes en la celda para mejorar la calidad del servicio. El cuarto mecanismo, CogNet, sirve para provisionar recursos de red y configurar una topología capaz de conmutar una demanda estimada y garantizar unas cotas de calidad del servicio. En este caso, los resultados arrojan una mayor precisión cuando la demanda de un servicio es mayor