Electrical Design for Manufacturability Solutions: Fast Systematic Variation Analysis and Design Enhancement Techniques

The primary objectives in this research are to develop computer-aided design (CAD) tools for Design for Manufacturability (DFM) solutions that enable designers to conduct more rapid and more accurate systematic variation analysis, with different design enhancement techniques. Four main CAD tools are developed throughout my thesis. The first CAD tool facilitates a quantitative study of the impact of systematic variations for different circuits' electrical and geometrical behavior. This is accomplished by automatically performing an extensive analysis of different process variations (lithography and stress) and their dependency on the design context. Such a tool helps to explore and evaluate the systematic variation impact on any type of design. Secondly, solutions in the industry focus on the "design and then fix philosophy", or "fix during design philosophy", whereas the next CAD tool involves the "fix before design philosophy". Here, the standard cell library is characterized in different design contexts, different resolution enhancement techniques, and different process conditions, generating a fully DFM-aware standard cell library using a newly developed methodology that dramatically reduce the required number of silicon simulations. Several experiments are conducted on 65nm and 45nm designs, and demonstrate more robust and manufacturable designs that can be implemented by using the DFM-aware standard cell library. Thirdly, a novel electrical-aware hotspot detection solution is developed by using a device parameter-based matching technique since the state-of-the-art hotspot detection solutions are all geometrical based. This CAD tool proposes a new philosophy by detecting yield limiters, also known as hotspots, through the model parameters of the device, presented in the SPICE netlist. This novel hotspot detection methodology is tested and delivers extraordinary fast and accurate results. Finally, the existing DFM solutions, mainly address the digital designs. Process variations play an increasingly important role in the success of analog circuits. Knowledge of the parameter variances and their contribution patterns is crucial for a successful design process. This information is valuable to find solutions for many problems in design, design automation, testing, and fault tolerance. The fourth CAD solution, proposed in this thesis, introduces a variability-aware DFM solution that detects, analyze, and automatically correct hotspots for analog circuits

A Modular Approach to Adaptive Reactive Streaming Systems

The latest generations of FPGA devices offer large resource counts that provide the headroom to implement large-scale and complex systems. However, there are increasing challenges for the designer, not just because of pure size and complexity, but also in harnessing effectively the flexibility and programmability of the FPGA. A central issue is the need to integrate modules from diverse sources to promote modular design and reuse. Further, the capability to perform dynamic partial reconfiguration (DPR) of FPGA devices means that implemented systems can be made reconfigurable, allowing components to be changed during operation. However, use of DPR typically requires low-level planning of the system implementation, adding to the design challenge. This dissertation presents ReShape: a high-level approach for designing systems by interconnecting modules, which gives a ‘plug and play’ look and feel to the designer, is supported by tools that carry out implementation and verification functions, and is carried through to support system reconfiguration during operation. The emphasis is on the inter-module connections and abstracting the communication patterns that are typical between modules – for example, the streaming of data that is common in many FPGA-based systems, or the reading and writing of data to and from memory modules. ShapeUp is also presented as the static precursor to ReShape. In both, the details of wiring and signaling are hidden from view, via metadata associated with individual modules. ReShape allows system reconfiguration at the module level, by supporting type checking of replacement modules and by managing the overall system implementation, via metadata associated with its FPGA floorplan. The methodology and tools have been implemented in a prototype for a broad domain-specific setting – networking systems – and have been validated on real telecommunications design projects

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

UML-Based co-design framework for body sensor network applications

Ph.DDOCTOR OF PHILOSOPH

Improving the Performance of Wide Area Networks

Research in to the performance of wide area data networks is described in this thesis. A model of wide area network packet delays is developed and used to direct the research in to methods of improving performance. Wide area networks are slow and expensive compared to the computer systems that rely on them for communication. Typically data networks are packet switched in order to make efficient use of resources. This can lead to contention, and the mechanisms for resolving contention can bring about further delays when demand for resources is high. In this thesis, network users are viewed as interacting decision makers with conflicting interests, and Game Theory is used to analyse the effects users have on each other’s performance. It is asserted in this thesis that wide area network performance is an ethical issue as well as a technical one. Compression is examined as a technique for reducing network traffic load. While load reductions can reduce the time packets spend waiting in buffer queues experimental results show the compression process itself can present a bottleneck if CPU resources are limited. The other inhibiting factor with regard to wide area network performance is the time it takes for a signal to propagate through a transmission medium. Propagation delays are bounded by the speed of light and becomes significant as the distance between computer systems increases. Mirrors and Caches are methods of bringing data closer to the user, thereby reducing propagation delays and capping traffic loads on long haul communication facilities. The performance benefits of replicating data within a wide area network environment are studied in this thesis

Efficient runtime placement management for high performance and reliability in COTS FPGAs

Designing high-performance, fault-tolerant multisensory electronic systems for hostile environments such as nuclear plants and outer space within the constraints of cost, power and flexibility is challenging. Issues such as ionizing radiation, extreme temperature and ageing can lead to faults in the electronics of these systems. In addition, the remote nature of these environments demands a level of flexibility and autonomy in their operations. The standard practice of using specially hardened electronic devices for such systems is not only very expensive but also has limited flexibility. This thesis proposes novel techniques that promote the use of Commercial Off-The- Shelf (COTS) reconfigurable devices to meet the challenges of high-performance systems for hostile environments. Reconfigurable hardware such as Field Programmable Gate Arrays (FPGA) have a unique combination of flexibility and high performance. The flexibility offered through features such as dynamic partial reconfiguration (DPR) can be harnessed not only to achieve cost-effective designs as a smaller area can be used to execute multiple tasks, but also to improve the reliability of a system as a circuit on one portion of the device can be physically relocated to another portion in the case of fault occurrence. However, to harness these potentials for high performance and reliability in a cost-effective manner, novel runtime management tools are required. Most runtime support tools for reconfigurable devices are based on ideal models which do not adequately consider the limitations of realistic FPGAs, in particular modern FPGAs which are increasingly heterogeneous. Specifically, these tools lack efficient mechanisms for ensuring a high utilization of FPGA resources, including the FPGA area and the configuration port and clocking resources, in a reliable manner. To ensure high utilization of reconfigurable device area, placement management is a key aspect of these tools. This thesis presents novel techniques for the management of hardware task placement on COTS reconfigurable devices for high performance and reliability. To this end, it addresses design-time issues that affect efficient hardware task placement, with a focus on reliability. It also presents techniques to maximize the utilization of the FPGA area in runtime, including techniques to minimize fragmentation. Fragmentation leads to the creation of unusable areas due to dynamic placement of tasks and the heterogeneity of the resources on the chip. Moreover, this thesis also presents an efficient task reuse mechanism to improve the availability of the internal configuration infrastructure of the FPGA for critical responsibilities like error mitigation. The task reuse scheme, unlike previous approaches, also improves the utilization of the chip area by offering defragmentation. Task relocation, which involves changing the physical location of circuits is a technique for error mitigation and high performance. Hence, this thesis also provides a functionality-based relocation mechanism for improving the number of locations to which tasks can be relocated on heterogeneous FPGAs. As tasks are relocated, clock networks need to be routed to them. As such, a reliability-aware technique of clock network routing to tasks after placement is also proposed. Finally, this thesis offers a prototype implementation and characterization of a placement management system (PMS) which is an integration of the aforementioned techniques. The performance of most of the proposed techniques are tested using data processing tasks of a NASA JPL spectrometer application. The results show that the proposed techniques have potentials to improve the reliability and performance of applications in hostile environment compared to state-of-the-art techniques. The task optimization technique presented leads to better capacity to circumvent permanent faults on COTS FPGAs compared to state-of-the-art approaches (48.6% more errors were circumvented for the JPL spectrometer application). The proposed task reuse scheme leads to approximately 29% saving in the amount of configuration time. This frees up the internal configuration interface for more error mitigation operations. In addition, the proposed PMS has a worst-case latency of less than 50% of that of state-of- the-art runtime placement systems, while maintaining the same level of placement quality and resource overhead

Cross-Layer Rapid Prototyping and Synthesis of Application-Specific and Reconfigurable Many-accelerator Platforms

Technological advances of recent years laid the foundation consolidation of informatisationof society, impacting on economic, political, cultural and socialdimensions. At the peak of this realization, today, more and more everydaydevices are connected to the web, giving the term ”Internet of Things”. The futureholds the full connection and interaction of IT and communications systemsto the natural world, delimiting the transition to natural cyber systems and offeringmeta-services in the physical world, such as personalized medical care, autonomoustransportation, smart energy cities etc. . Outlining the necessities of this dynamicallyevolving market, computer engineers are required to implement computingplatforms that incorporate both increased systemic complexity and also cover awide range of meta-characteristics, such as the cost and design time, reliabilityand reuse, which are prescribed by a conflicting set of functional, technical andconstruction constraints. This thesis aims to address these design challenges bydeveloping methodologies and hardware/software co-design tools that enable therapid implementation and efficient synthesis of architectural solutions, which specifyoperating meta-features required by the modern market. Specifically, this thesispresents a) methodologies to accelerate the design flow for both reconfigurableand application-specific architectures, b) coarse-grain heterogeneous architecturaltemplates for processing and communication acceleration and c) efficient multiobjectivesynthesis techniques both at high abstraction level of programming andphysical silicon level.Regarding to the acceleration of the design flow, the proposed methodologyemploys virtual platforms in order to hide architectural details and drastically reducesimulation time. An extension of this framework introduces the systemicco-simulation using reconfigurable acceleration platforms as co-emulation intermediateplatforms. Thus, the development cycle of a hardware/software productis accelerated by moving from a vertical serial flow to a circular interactive loop.Moreover the simulation capabilities are enriched with efficient detection and correctiontechniques of design errors, as well as control methods of performancemetrics of the system according to the desired specifications, during all phasesof the system development. In orthogonal correlation with the aforementionedmethodological framework, a new architectural template is proposed, aiming atbridging the gap between design complexity and technological productivity usingspecialized hardware accelerators in heterogeneous systems-on-chip and networkon-chip platforms. It is presented a novel co-design methodology for the hardwareaccelerators and their respective programming software, including the tasks allocationto the available resources of the system/network. The introduced frameworkprovides implementation techniques for the accelerators, using either conventionalprogramming flows with hardware description language or abstract programmingmodel flows, using techniques from high-level synthesis. In any case, it is providedthe option of systemic measures optimization, such as the processing speed,the throughput, the reliability, the power consumption and the design silicon area.Finally, on addressing the increased complexity in design tools of reconfigurablesystems, there are proposed novel multi-objective optimization evolutionary algo-rithms which exploit the modern multicore processors and the coarse-grain natureof multithreaded programming environments (e.g. OpenMP) in order to reduce theplacement time, while by simultaneously grouping the applications based on theirintrinsic characteristics, the effectively explore the design space effectively.The efficiency of the proposed architectural templates, design tools and methodologyflows is evaluated in relation to the existing edge solutions with applicationsfrom typical computing domains, such as digital signal processing, multimedia andarithmetic complexity, as well as from systemic heterogeneous environments, suchas a computer vision system for autonomous robotic space navigation and manyacceleratorsystems for HPC and workstations/datacenters. The results strengthenthe belief of the author, that this thesis provides competitive expertise to addresscomplex modern - and projected future - design challenges.Οι τεχνολογικές εξελίξεις των τελευταίων ετών έθεσαν τα θεμέλια εδραίωσης της πληροφοριοποίησης της κοινωνίας, επιδρώντας σε οικονομικές,πολιτικές, πολιτιστικές και κοινωνικές διαστάσεις. Στο απόγειο αυτής τη ςπραγμάτωσης, σήμερα, ολοένα και περισσότερες καθημερινές συσκευές συνδέονται στο παγκόσμιο ιστό, αποδίδοντας τον όρο «Ίντερνετ των πραγμάτων».Το μέλλον επιφυλάσσει την πλήρη σύνδεση και αλληλεπίδραση των συστημάτων πληροφορικής και επικοινωνιών με τον φυσικό κόσμο, οριοθετώντας τη μετάβαση στα συστήματα φυσικού κυβερνοχώρου και προσφέροντας μεταυπηρεσίες στον φυσικό κόσμο όπως προσωποποιημένη ιατρική περίθαλψη, αυτόνομες μετακινήσεις, έξυπνες ενεργειακά πόλεις κ.α. . Σκιαγραφώντας τις ανάγκες αυτής της δυναμικά εξελισσόμενης αγοράς, οι μηχανικοί υπολογιστών καλούνται να υλοποιήσουν υπολογιστικές πλατφόρμες που αφενός ενσωματώνουν αυξημένη συστημική πολυπλοκότητα και αφετέρου καλύπτουν ένα ευρύ φάσμα μεταχαρακτηριστικών, όπως λ.χ. το κόστος σχεδιασμού, ο χρόνος σχεδιασμού, η αξιοπιστία και η επαναχρησιμοποίηση, τα οποία προδιαγράφονται από ένα αντικρουόμενο σύνολο λειτουργικών, τεχνολογικών και κατασκευαστικών περιορισμών. Η παρούσα διατριβή στοχεύει στην αντιμετώπιση των παραπάνω σχεδιαστικών προκλήσεων, μέσω της ανάπτυξης μεθοδολογιών και εργαλείων συνσχεδίασης υλικού/λογισμικού που επιτρέπουν την ταχεία υλοποίηση καθώς και την αποδοτική σύνθεση αρχιτεκτονικών λύσεων, οι οποίες προδιαγράφουν τα μετα-χαρακτηριστικά λειτουργίας που απαιτεί η σύγχρονη αγορά. Συγκεκριμένα, στα πλαίσια αυτής της διατριβής, παρουσιάζονται α) μεθοδολογίες επιτάχυνσης της ροής σχεδιασμού τόσο για επαναδιαμορφούμενες όσο και για εξειδικευμένες αρχιτεκτονικές, β) ετερογενή αδρομερή αρχιτεκτονικά πρότυπα επιτάχυνσης επεξεργασίας και επικοινωνίας και γ) αποδοτικές τεχνικές πολυκριτηριακής σύνθεσης τόσο σε υψηλό αφαιρετικό επίπεδο προγραμματισμού,όσο και σε φυσικό επίπεδο πυριτίου.Αναφορικά προς την επιτάχυνση της ροής σχεδιασμού, προτείνεται μια μεθοδολογία που χρησιμοποιεί εικονικές πλατφόρμες, οι οποίες αφαιρώντας τις αρχιτεκτονικές λεπτομέρειες καταφέρνουν να μειώσουν σημαντικά το χρόνο εξομοίωσης. Παράλληλα, εισηγείται η συστημική συν-εξομοίωση με τη χρήση επαναδιαμορφούμενων πλατφορμών, ως μέσων επιτάχυνσης. Με αυτόν τον τρόπο, ο κύκλος ανάπτυξης ενός προϊόντος υλικού, μετατεθειμένος από την κάθετη σειριακή ροή σε έναν κυκλικό αλληλεπιδραστικό βρόγχο, καθίσταται ταχύτερος, ενώ οι δυνατότητες προσομοίωσης εμπλουτίζονται με αποδοτικότερες μεθόδους εντοπισμού και διόρθωσης σχεδιαστικών σφαλμάτων, καθώς και μεθόδους ελέγχου των μετρικών απόδοσης του συστήματος σε σχέση με τις επιθυμητές προδιαγραφές, σε όλες τις φάσεις ανάπτυξης του συστήματος. Σε ορθογώνια συνάφεια με το προαναφερθέν μεθοδολογικό πλαίσιο, προτείνονται νέα αρχιτεκτονικά πρότυπα που στοχεύουν στη γεφύρωση του χάσματος μεταξύ της σχεδιαστικής πολυπλοκότητας και της τεχνολογικής παραγωγικότητας, με τη χρήση συστημάτων εξειδικευμένων επιταχυντών υλικού σε ετερογενή συστήματα-σε-ψηφίδα καθώς και δίκτυα-σε-ψηφίδα. Παρουσιάζεται κατάλληλη μεθοδολογία συν-σχεδίασης των επιταχυντών υλικού και του λογισμικού προκειμένου να αποφασισθεί η κατανομή των εργασιών στους διαθέσιμους πόρους του συστήματος/δικτύου. Το μεθοδολογικό πλαίσιο προβλέπει την υλοποίηση των επιταχυντών είτε με συμβατικές μεθόδους προγραμματισμού σε γλώσσα περιγραφής υλικού είτε με αφαιρετικό προγραμματιστικό μοντέλο με τη χρήση τεχνικών υψηλού επιπέδου σύνθεσης. Σε κάθε περίπτωση, δίδεται η δυνατότητα στο σχεδιαστή για βελτιστοποίηση συστημικών μετρικών, όπως η ταχύτητα επεξεργασίας, η ρυθμαπόδοση, η αξιοπιστία, η κατανάλωση ενέργειας και η επιφάνεια πυριτίου του σχεδιασμού. Τέλος, προκειμένου να αντιμετωπισθεί η αυξημένη πολυπλοκότητα στα σχεδιαστικά εργαλεία επαναδιαμορφούμενων συστημάτων, προτείνονται νέοι εξελικτικοί αλγόριθμοι πολυκριτηριακής βελτιστοποίησης, οι οποίοι εκμεταλλευόμενοι τους σύγχρονους πολυπύρηνους επεξεργαστές και την αδρομερή φύση των πολυνηματικών περιβαλλόντων προγραμματισμού (π.χ. OpenMP), μειώνουν το χρόνο επίλυσης του προβλήματος της τοποθέτησης των λογικών πόρων σε φυσικούς,ενώ ταυτόχρονα, ομαδοποιώντας τις εφαρμογές βάση των εγγενών χαρακτηριστικών τους, διερευνούν αποτελεσματικότερα το χώρο σχεδίασης.Η αποδοτικότητά των προτεινόμενων αρχιτεκτονικών προτύπων και μεθοδολογιών επαληθεύτηκε σε σχέση με τις υφιστάμενες λύσεις αιχμής τόσο σε αυτοτελής εφαρμογές, όπως η ψηφιακή επεξεργασία σήματος, τα πολυμέσα και τα προβλήματα αριθμητικής πολυπλοκότητας, καθώς και σε συστημικά ετερογενή περιβάλλοντα, όπως ένα σύστημα όρασης υπολογιστών για αυτόνομα διαστημικά ρομποτικά οχήματα και ένα σύστημα πολλαπλών επιταχυντών υλικού για σταθμούς εργασίας και κέντρα δεδομένων, στοχεύοντας εφαρμογές υψηλής υπολογιστικής απόδοσης (HPC). Τα αποτελέσματα ενισχύουν την πεποίθηση του γράφοντα, ότι η παρούσα διατριβή παρέχει ανταγωνιστική τεχνογνωσία για την αντιμετώπιση των πολύπλοκων σύγχρονων και προβλεπόμενα μελλοντικών σχεδιαστικών προκλήσεων

Using reconfigurable computing technology to accelerate matrix decomposition and applications

Matrix decomposition plays an increasingly significant role in many scientific and engineering applications. Among numerous techniques, Singular Value Decomposition (SVD) and Eigenvalue Decomposition (EVD) are widely used as factorization tools to perform Principal Component Analysis for dimensionality reduction and pattern recognition in image processing, text mining and wireless communications, while QR Decomposition (QRD) and sparse LU Decomposition (LUD) are employed to solve the dense or sparse linear system of equations in bioinformatics, power system and computer vision. Matrix decompositions are computationally expensive and their sequential implementations often fail to meet the requirements of many time-sensitive applications. The emergence of reconfigurable computing has provided a flexible and low-cost opportunity to pursue high-performance parallel designs, and the use of FPGAs has shown promise in accelerating this class of computation. In this research, we have proposed and implemented several highly parallel FPGA-based architectures to accelerate matrix decompositions and their applications in data mining and signal processing. Specifically, in this dissertation we describe the following contributions: • We propose an efficient FPGA-based double-precision floating-point architecture for EVD, which can efficiently analyze large-scale matrices. • We implement a floating-point Hestenes-Jacobi architecture for SVD, which is capable of analyzing arbitrary sized matrices. • We introduce a novel deeply pipelined reconfigurable architecture for QRD, which can be dynamically configured to perform either Householder transformation or Givens rotation in a manner that takes advantage of the strengths of each. • We design a configurable architecture for sparse LUD that supports both symmetric and asymmetric sparse matrices with arbitrary sparsity patterns. • By further extending the proposed hardware solution for SVD, we parallelize a popular text mining tool-Latent Semantic Indexing with an FPGA-based architecture. • We present a configurable architecture to accelerate Homotopy l1-minimization, in which the modification of the proposed FPGA architecture for sparse LUD is used at its core to parallelize both Cholesky decomposition and rank-1 update. Our experimental results using an FPGA-based acceleration system indicate the efficiency of our proposed novel architectures, with application and dimension-dependent speedups over an optimized software implementation that range from 1.5ÃÂ to 43.6ÃÂ in terms of computation time