Low Power Circuit Design in Sustainable Self Powered Systems for IoT Applications

The Internet-of-Things (IoT) network is being vigorously pushed forward from many fronts in diverse research communities. Many problems are still there to be solved, and challenges are found among its many levels of abstraction. In this thesis we give an overview of recent developments in circuit design for ultra-low power transceivers and energy harvesting management units for the IoT. The first part of the dissertation conducts a study of energy harvesting interfaces and optimizing power extraction, followed by power management for energy storage and supply regulation. we give an overview of the recent developments in circuit design for ultra-low power management units, focusing mainly in the architectures and techniques required for energy harvesting from multiple heterogeneous sources. Three projects are presented in this area to reach a solution that provides reliable continuous operation for IoT sensor nodes in the presence of one or more natural energy sources to harvest from. The second part focuses on wireless transmission, To reduce the power consumption and boost the Tx energy efficiency, a novel delay cell exploiting current reuse is used in a ring-oscillator employed as the local oscillator generator scheme. In combination with an edge-combiner power amplifier, the Tx showed a measured energy efficiency of 0.2 nJ=bit and a normalized energy efficiency of 3.1 nJ=bit:mW when operating at output power levels up to -10 dBm and data rates of 3 Mbps

Modeling and Mitigation of Soft Errors in Nanoscale SRAMs

Energetic particle (alpha particle, cosmic neutron, etc.) induced single event data upset or soft error has emerged as a key reliability concern in SRAMs in sub-100 nanometre technologies. Low operating voltage, small node capacitance, high packing density, and lack of error masking mechanisms are primarily responsible for the soft error susceptibility of SRAMs. In addition, since SRAM occupies the majority of die area in system-on-chips (SoCs) and microprocessors, different leakage reduction techniques, such as, supply voltage reduction, gated grounding, etc., are applied to SRAMs in order to limit the overall chip leakage. These leakage reduction techniques exponentially increase the soft error rate in SRAMs. The soft error rate is further accentuated by process variations, which are prominent in scaled-down technologies. In this research, we address these concerns and propose techniques to characterize and mitigate soft errors in nanoscale SRAMs. We develop a comprehensive analytical model of the critical charge, which is a key to assessing the soft error susceptibility of SRAMs. The model is based on the dynamic behaviour of the cell and a simple decoupling technique for the non-linearly coupled storage nodes. The model describes the critical charge in terms of NMOS and PMOS transistor parameters, cell supply voltage, and noise current parameters. Consequently, it enables characterizing the spread of critical charge due to process induced variations in these parameters and to manufacturing defects, such as, resistive contacts or vias. In addition, the model can estimate the improvement in critical charge when MIM capacitors are added to the cell in order to improve the soft error robustness. The model is validated by SPICE simulations (90nm CMOS) and radiation test. The critical charge calculated by the model is in good agreement with SPICE simulations with a maximum discrepancy of less than 5%. The soft error rate estimated by the model for low voltage (sub 0.8 V) operations is within 10% of the soft error rate measured in the radiation test. Therefore, the model can serve as a reliable alternative to time consuming SPICE simulations for optimizing the critical charge and hence the soft error rate at the design stage. In order to limit the soft error rate further, we propose an area-efficient multiword based error correction code (MECC) scheme. The MECC scheme combines four 32 bit data words to form a composite 128 bit ECC word and uses an optimized 4-input transmission-gate XOR logic. Thus MECC significantly reduces the area overhead for check-bit storage and the delay penalty for error correction. In addition, MECC interleaves two composite words in a row for limiting cosmic neutron induced multi-bit errors. The ground potentials of the composite words are controlled to minimize leakage power without compromising the read data stability. However, use of composite words involves a unique write operation where one data word is written while other three data words are read to update the check-bits. A power efficient word line signaling technique is developed to facilitate the write operation. A 64 kb SRAM macro with MECC is designed and fabricated in a commercial 90nm CMOS technology. Measurement results show that the SRAM consumes 534 μW at 100 MHz with a data latency of 3.3 ns for a single bit error correction. This translates into 82% per-bit energy saving and 8x speed improvement over recently reported multiword ECC schemes. Accelerated neutron radiation test carried out at TRIUMF in Vancouver confirms that the proposed MECC scheme can correct up to 85% of soft errors

Design and Analysis of an Adjacent Multi-bit Error Correcting Code for Nanoscale SRAMs

Increasing static random access memory (SRAM) bitcell density is a major driving force for semiconductor technology scaling. The industry standard 2x reduction in SRAM bitcell area per technology node has lead to a proliferation in memory intensive applications as greater memory system capacity can be realized per unit area. Coupled with this increasing capacity is an increasing SRAM system-level soft error rate (SER). Soft errors, caused by galactic radiation and radioactive chip packaging material corrupt a bitcell’s data-state and are a potential cause of catastrophic system failures. Further, reductions in device geometries, design rules, and sensitive node capacitances increase the probability of multiple adjacent bitcells being upset per particle strike to over 30% of the total SER below the 45 nm process node. Traditionally, these upsets have been addressed using a simple error correction code (ECC) combined with word interleaving. With continued scaling however, errors beyond this setup begin to emerge. Although more powerful ECCs exist, they come at an increased overhead in terms of area and latency. Additionally, interleaving adds complexity to the system and may not always be feasible for the given architecture. In this thesis, a new class of ECC targeted toward adjacent multi-bit upsets (MBU) is proposed and analyzed. These codes present a tradeoff between the currently popular single error correcting-double error detecting (SEC-DED) ECCs used in SRAMs (that are unable to correct MBUs), and the more robust multi-bit ECC schemes used for MBU reliability. The proposed codes are evaluated and compared against other ECCs using a custom test suite and multi-bit error channel model developed in Matlab as well as Verilog hardware description language (HDL) implementations synthesized using Synopsys Design Compiler and a commercial 65 nm bulk CMOS standard cell library. Simulation results show that for the same check-bit overhead as a conventional 64 data-bit SEC-DED code, the proposed scheme provides a corrected-SER approximately equal to the Bose-Chaudhuri- Hocquenghem (BCH) double error correcting (DEC) code, and a 4.38x improvement over the SEC-DED code in the same error channel. While, for 3 additional check-bits (still 3 less than the BCH DEC code), a triple adjacent error correcting version of the proposed code provides a 2.35x improvement in corrected-SER over the BCH DEC code for 90.9% less ECC circuit area and 17.4% less error correction delay. For further verification, a 0.4-1.0 V 75 kb single-cycle SRAM macro protected with a programmable, up-to-3-adjacent-bit-correcting version of the proposed ECC has been fab- ricated in a commercial 28 nm bulk CMOS process. The SRAM macro has undergone neu- tron irradiation testing at the TRIUMF Neutron Irradiation Facility in Vancouver, Canada. Measurements results show a 189x improvement in SER over an unprotected memory with no ECC enabled and a 5x improvement over a traditional single-error-correction (SEC) code at 0.5 V using 1-way interleaving for the same number of check-bits. This is compa- rable with the 4.38x improvement observed in simulation. Measurement results confirm an average active energy of 0.015 fJ/bit at 0.4 V, and average 80 mV reduction in VDDMIN across eight packaged chips by enabling the ECC. Both the SRAM macro and ECC circuit were designed for dynamic voltage and frequency scaling for both nominal and low voltage applications using a full-custom circuit design flow

On-Chip Power Supply Noise: Scaling, Suppression and Detection

Design metrics such as area, timing and power are generally considered as the primary criteria in the design of modern day circuits, however, the minimization of power supply noise, among other noise sources, is appreciably more important since not only can it cause a degradation in these parameters but can cause entire chips to fail. Ensuring the integrity of the power supply voltage in the power distribution network of a chip is therefore crucial to both building reliable circuits as well as preventing circuit performance degradation. Power supply noise concerns, predicted over two decades ago, continue to draw significant attention, and with present CMOS technology projected to keep on scaling, it is shown in this work that these issues are not expected to diminish. This research also considers the management and on-chip detection of power supply noise. There are various methods of managing power supply noise, with the use of decoupling capacitors being the most common technique for suppressing the noise. An in-depth analysis of decap structures including scaling effects is presented in this work with corroborating silicon results. The applicability of various decaps for given design constraints is provided. It is shown that MOS-metal hybrid structures can provide a significant increase in capacitance per unit area compared to traditional structures and will continue to be an important structure as technology continues to scale. Noise suppression by means of current shifting within the clock period of an ALU block is further shown to be an additional method of reducing the minimum voltage observed on its associated supply. A simple, and area and power efficient technique for on-chip supply noise detection is also proposed