78 research outputs found
Survey on Recent Advances in Integrated GNSSs Towards Seamless Navigation Using Multi-Sensor Fusion Technology
During the past few decades, the presence of global navigation satellite systems (GNSSs) such as GPS, GLONASS, Beidou and Galileo has facilitated positioning, navigation and timing (PNT) for various outdoor applications. With the rapid increase in the number of orbiting satellites per GNSS, enhancements in the satellite-based augmentation systems (SBASs) such as EGNOS and WAAS, as well as commissioning new GNSS constellations, the PNT capabilities are maximized to reach new frontiers. Additionally, the recent developments in precise point positioning (PPP) and real time kinematic (RTK) algorithms have provided more feasibility to carrier-phase precision positioning solutions up to the third-dimensional localization. With the rapid growth of internet of things (IoT) applications, seamless navigation becomes very crucial for numerous PNT dependent applications especially in sensitive fields such as safety and industrial applications. Throughout the years, GNSSs have maintained sufficiently acceptable performance in PNT, in RTK and PPP applications however GNSS experienced major challenges in some complicated signal environments. In many scenarios, GNSS signal suffers deterioration due to multipath fading and attenuation in densely obscured environments that comprise stout obstructions. Recently, there has been a growing demand e.g. in the autonomous-things domain in adopting reliable systems that accurately estimate position, velocity and time (PVT) observables. Such demand in many applications also facilitates the retrieval of information about the six degrees of freedom (6-DOF - x, y, z, roll, pitch, and heading) movements of the target anchors. Numerous modern applications are regarded as beneficiaries of precise PNT solutions such as the unmanned aerial vehicles (UAV), the automatic guided vehicles (AGV) and the intelligent transportation system (ITS). Hence, multi-sensor fusion technology has become very vital in seamless navigation systems owing to its complementary capabilities to GNSSs. Fusion-based positioning in multi-sensor technology comprises the use of multiple sensors measurements for further refinement in addition to the primary GNSS, which results in high precision and less erroneous localization. Inertial navigation systems (INSs) and their inertial measurement units (IMUs) are the most commonly used technologies for augmenting GNSS in multi-sensor integrated systems. In this article, we survey the most recent literature on multi-sensor GNSS technology for seamless navigation. We provide an overall perspective for the advantages, the challenges and the recent developments of the fusion-based GNSS navigation realm as well as analyze the gap between scientific advances and commercial offerings. INS/GNSS and IMU/GNSS systems have proven to be very reliable in GNSS-denied environments where satellite signal degradation is at its peak, that is why both integrated systems are very abundant in the relevant literature. In addition, the light detection and ranging (LiDAR) systems are widely adopted in the literature for its capability to provide 6-DOF to mobile vehicles and autonomous robots. LiDARs are very accurate systems however they are not suitable for low-cost positioning due to the expensive initial costs. Moreover, several other techniques from the radio frequency (RF) spectrum are utilized as multi-sensor systems such as cellular networks, WiFi, ultra-wideband (UWB) and Bluetooth. The cellular-based systems are very suitable for outdoor navigation applications while WiFi-based, UWB-based and Bluetooth-based systems are efficient in indoor positioning systems (IPS). However, to achieve reliable PVT estimations in multi-sensor GNSS navigation, optimal algorithms should be developed to mitigate the estimation errors resulting from non-line-of-sight (NLOS) GNSS situations. Examples of the most commonly used algorithms for trilateration-based positioning are Kalman filters, weighted least square (WLS), particle filters (PF) and many other hybrid algorithms by mixing one or more algorithms together. In this paper, the reviewed articles under study and comparison are presented by highlighting their motivation, the methodology of implementation, the modelling utilized and the performed experiments. Then they are assessed with respect to the published results focusing on achieved accuracy, robustness and overall implementation cost-benefits as performance metrics. Our summarizing survey assesses the most promising, highly ranked and recent articles that comprise insights into the future of GNSS technology with multi-sensor fusion technique.©2021 The Authors. Published by ION.fi=vertaisarvioimaton|en=nonPeerReviewed
A Comprehensive Review of the GNSS with IoT Applications and Their Use Cases with Special Emphasis on Machine Learning and Deep Learning Models
This paper presents a comprehensive review of the Global Navigation Satellite System (GNSS) with Internet of Things (IoT) applications and their use cases with special emphasis on Machine learning (ML) and Deep Learning (DL) models. Various factors like the availability of a huge amount of GNSS data due to the increasing number of interconnected devices having low-cost data storage and low-power processing technologies - which is majorly due to the evolution of IoT - have accelerated the use of machine learning and deep learning based algorithms in the GNSS community. IoT and GNSS technology can track almost any item possible. Smart cities are being developed with the use of GNSS and IoT. This survey paper primarily reviews several machine learning and deep learning algorithms and solutions applied to various GNSS use cases that are especially helpful in providing accurate and seamless navigation solutions in urban areas. Multipath, signal outages with less satellite visibility, and lost communication links are major challenges that hinder the navigation process in crowded areas like cities and dense forests. The advantages and disadvantages of using machine learning techniques are also highlighted along with their potential applications with GNSS and IoT
An autonomous navigational system using GPS and computer vision for futuristic road traffic
Navigational service is one of the most essential dependency towards any transport system and at present, there are various revolutionary approaches that has contributed towards its improvement. This paper has reviewed the global positioning system (GPS) and computer vision based navigational system and found that there is a large gap between the actual demand of navigation and what currently exists. Therefore, the proposed study discusses about a novel framework of an autonomous navigation system that uses GPS as well as computer vision considering the case study of futuristic road traffic system. An analytical model is built up where the geo-referenced data from GPS is integrated with the signals captured from the visual sensors are considered to implement this concept. The simulated outcome of the study shows that proposed study offers enhanced accuracy as well as faster processing in contrast to existing approaches
A review of Kalman filter with artificial intelligence techniques
Kalman filter (KF) is a widely used estimation algorithm for many applications. However, in many cases, it is not easy to estimate the exact state of the system due to many reasons such as an imperfect mathematical model, dynamic environments, or inaccurate parameters of KF. Artificial intelligence (AI) techniques have been applied to many estimation algorithms thanks to the advantage of AI techniques that have the ability of mapping between the input and the output, the so-called "black box". In this paper, we found and reviewed 55 papers that proposed KF with AI techniques to improve its performance. Based on the review, we categorised papers into four groups according to the role of AI as follows: 1) Methods tuning parameters of KF, 2) Methods compensating errors in KF, 3) Methods updating state vector or measurements of KF, and 4) Methods estimating pseudo-measurements of KF. In the concluding section of this paper, we pointed out the directions for future research that suggestion to focus on more research for combining the categorised groups. In addition, we presented the suggestion of beneficial approaches for representative applications
Optimized Filter Design for Non-Differential GPS/IMU Integrated Navigation
The endeavours in improving the performance of a conventional non-differential GPS/MEMS IMU tightly-coupled navigation system through filter design, involving nonlinear filtering methods, inertial sensors' stochastic error modelling and the carrier phase implementation, are described and introduced in this thesis. The main work is summarised as follows.
Firstly, the performance evaluation of a recently developed nonlinear filtering method, the Cubature Kalman filter (CKF), is analysed based on the Taylor expansion. The theoretical analysis indicates that the nonlinear filtering method CKF shows its benefits only when implemented in a nonlinear system. Accordingly, a nonlinear attitude expression with direction cosine matrix (DCM) is introduced to tightly-coupled navigation system in order to describe the misalignment between the true and the estimated navigation frames. The simulation and experiment results show that the CKF performs better than the extended Kalman filter (EKF) in the unobservable, large misalignment and GPS outage cases when attitude errors accumulate quickly, rendering the psi-angle expression invalid and subsequently showing certain nonlinearity.
Secondly, the use of shaping filter theory to model the inertial sensors' stochastic errors in a navigation Kalman filter is also introduced. The coefficients of the inertial sensors' noises are determined from the Allan variance plot. The shaping filter transfer function is deduced from the power spectral density (PSD) of the noises for both stationary and non-stationary processes. All the coloured noises are modelled together in the navigation Kalman filter according to equivalence theory. The coasting performance shows that the shaping filter based modelling method has a similar and even smaller maximum position drift than the conventional 1st-order Markovian process modelling method during GPS outages, thus indicating its effectiveness.
Thirdly, according to the methods of dealing with carrier phase ambiguities, tightly-coupled navigation systems with time differenced carrier phase (TDCP) and total carrier phase (TCP) as Kalman filter measurements are deduced. The simulation and experiment results show that the TDCP can improve the velocity estimation accuracy and smooth trajectories, but position accuracy can only achieve the single point positioning (SPP) level if the TDCP is augmented with the pseudo-range, while the TCP based method's position accuracy can reach the sub-meter level. In order to further improve the position accuracy of the TDCP based method, a particle filter (PF) with modified TDCP observation is implemented in the TDCP/IMU tightly-coupled navigation system. The modified TDCP is defined as the carrier phase difference between the reference and observation epochs. The absolute position accuracy is determined by the reference position accuracy. If the reference position is taken from DGPS, the absolute position accuracy can reach the sub-meter level.
For TCP/IMU tightly-coupled navigation systems, because the implementation of TCP in the navigation Kalman filter introduces additional states to the state vector, a hybrid CKF+EKF filtering method with the CKF estimating nonlinear states and the EKF estimating linear states, is proposed to maintain the CKF's benefits while reducing the computational load. The navigation results indicate the effectiveness of the method.
After applying the improvements, the performance of a non-differential GPS/MEMS IMU tightly-coupled navigation system can be greatly improved
Safe navigation for vehicles
La navigation par satellite prend un virage très important ces dernières années, d'une part par l'arrivée imminente du système Européen GALILEO qui viendra compléter le GPS Américain, mais aussi et surtout par le succès grand public qu'il connaît aujourd'hui. Ce succès est dû en partie aux avancées technologiques au niveau récepteur, qui, tout en autorisant une miniaturisation de plus en plus avancée, en permettent une utilisation dans des environnements de plus en plus difficiles. L'objectif aujourd'hui est de préparer l'utilisation de ce genre de signal dans une optique bas coût dans un milieu urbain automobile pour des applications critiques d'un point de vue sécurité (ce que ne permet pas les techniques d'hybridation classiques). L'amélioration des technologies (réduction de taille des capteurs type MEMS ou Gyroscope) ne peut, à elle seule, atteindre l'objectif d'obtenir une position dont nous pouvons être sûrs si nous utilisons les algorithmes classiques de localisation et d'hybridation. En effet ces techniques permettent d'avoir une position sans cependant permettre d'en quantifier le niveau de confiance. La faisabilité de ces applications repose d'une part sur une recherche approfondie d'axes d'amélioration des algorithmes de localisation, mais aussi et conjointement, sur la possibilité, via les capteurs externes de maintenir un niveau de confiance élevé et quantifié dans la position même en absence de signal satellitaire. ABSTRACT : Satellite navigation has acquired an increased importance during these last years, on the one hand due to the imminent appearance of the European GALILEO system that will complement the American GPS, and on the other hand due to the great success it has encountered in the commercial civil market. An important part of this success is based on the technological development at the receiver level that has rendered satellite navigation possible even in difficult environments. Today's objective is to prepare the utilisation of this kind of signals for land vehicle applications demanding high precision positioning. One of the main challenges within this research domain, which cannot be addressed by classical coupling techniques, is related to the system capability to provide reliable position estimations. The enhancement in dead-reckoning technologies (i.e. size reduction of MEMS-based sensors or gyroscopes) cannot all by itself reach the necessary confidence levels if exploited with classical localization and integration algorithms. Indeed, these techniques provide a position estimation whose reliability or confidence level it is very difficult to quantify. The feasibility of these applications relies not only on an extensive research to enhance the navigation algorithm performances in harsh scenarios, but also and in parallel, on the possibility to maintain, thanks to the presence of additional sensors, a high confidence level on the position estimation even in the absence of satellite navigation signals
Wheel-INS2: Multiple MEMS IMU-based Dead Reckoning System for Wheeled Robots with Evaluation of Different IMU Configurations
A reliable self-contained navigation system is essential for autonomous
vehicles. Based on our previous study on Wheel-INS \cite{niu2019}, a
wheel-mounted inertial measurement unit (Wheel-IMU)-based dead reckoning (DR)
system, in this paper, we propose a multiple IMUs-based DR solution for the
wheeled robots. The IMUs are mounted at different places of the wheeled
vehicles to acquire various dynamic information. In particular, at least one
IMU has to be mounted at the wheel to measure the wheel velocity and take
advantages of the rotation modulation. The system is implemented through a
distributed extended Kalman filter structure where each subsystem
(corresponding to each IMU) retains and updates its own states separately. The
relative position constraints between the multiple IMUs are exploited to
further limit the error drift and improve the system robustness. Particularly,
we present the DR systems using dual Wheel-IMUs, one Wheel-IMU plus one vehicle
body-mounted IMU (Body-IMU), and dual Wheel-IMUs plus one Body-IMU as examples
for analysis and comparison. Field tests illustrate that the proposed multi-IMU
DR system outperforms the single Wheel-INS in terms of both positioning and
heading accuracy. By comparing with the centralized filter, the proposed
distributed filter shows unimportant accuracy degradation while holds
significant computation efficiency. Moreover, among the three multi-IMU
configurations, the one Body-IMU plus one Wheel-IMU design obtains the minimum
drift rate. The position drift rates of the three configurations are 0.82\%
(dual Wheel-IMUs), 0.69\% (one Body-IMU plus one Wheel-IMU), and 0.73\% (dual
Wheel-IMUs plus one Body-IMU), respectively.Comment: Accepted to IEEE Transactions on Intelligent Transportation System
Location-Enabled IoT (LE-IoT): A Survey of Positioning Techniques, Error Sources, and Mitigation
The Internet of Things (IoT) has started to empower the future of many
industrial and mass-market applications. Localization techniques are becoming
key to add location context to IoT data without human perception and
intervention. Meanwhile, the newly-emerged Low-Power Wide-Area Network (LPWAN)
technologies have advantages such as long-range, low power consumption, low
cost, massive connections, and the capability for communication in both indoor
and outdoor areas. These features make LPWAN signals strong candidates for
mass-market localization applications. However, there are various error sources
that have limited localization performance by using such IoT signals. This
paper reviews the IoT localization system through the following sequence: IoT
localization system review -- localization data sources -- localization
algorithms -- localization error sources and mitigation -- localization
performance evaluation. Compared to the related surveys, this paper has a more
comprehensive and state-of-the-art review on IoT localization methods, an
original review on IoT localization error sources and mitigation, an original
review on IoT localization performance evaluation, and a more comprehensive
review of IoT localization applications, opportunities, and challenges. Thus,
this survey provides comprehensive guidance for peers who are interested in
enabling localization ability in the existing IoT systems, using IoT systems
for localization, or integrating IoT signals with the existing localization
sensors
Parametric and State Estimation of Stationary MEMS-IMUs: A Tutorial
Inertial navigation systems (INS) are widely used in almost any operational
environment, including aviation, marine, and land vehicles. Inertial
measurements from accelerometers and gyroscopes allow the INS to estimate
position, velocity, and orientation of its host vehicle. However, as inherent
sensor measurement errors propagate into the state estimates, accuracy degrades
over time. To mitigate the resulting drift in state estimates, different
approaches of parametric and state estimation are proposed to compensate for
undesirable errors, using frequency-domain filtering or external information
fusion. Another approach uses multiple inertial sensors, a field with rapid
growth potential and applications. The increased sampling of the observed
phenomenon results in the improvement of several key factors such as signal
accuracy, frequency resolution, noise rejection, and higher redundancy. This
study offers an analysis tutorial of basic multiple inertial operation, with a
new perspective on the error relationship to time, and number of sensors. To
that end, a stationary and levelled sensors array is taken, and its robustness
against the instrumental errors is analyzed. Subsequently, the hypothesized
analytical model is compared with the experimental results, and the level of
agreement between them is thoroughly discussed. Ultimately, our results
showcase the vast potential of employing multiple sensors, as we observe
improvements spanning from the signal level to the navigation states. This
tutorial is suitable for both newcomers and people experienced with multiple
inertial sensors
- …