Vehicle as a Service (VaaS): Leverage Vehicles to Build Service Networks and Capabilities for Smart Cities

Smart cities demand resources for rich immersive sensing, ubiquitous communications, powerful computing, large storage, and high intelligence (SCCSI) to support various kinds of applications, such as public safety, connected and autonomous driving, smart and connected health, and smart living. At the same time, it is widely recognized that vehicles such as autonomous cars, equipped with significantly powerful SCCSI capabilities, will become ubiquitous in future smart cities. By observing the convergence of these two trends, this article advocates the use of vehicles to build a cost-effective service network, called the Vehicle as a Service (VaaS) paradigm, where vehicles empowered with SCCSI capability form a web of mobile servers and communicators to provide SCCSI services in smart cities. Towards this direction, we first examine the potential use cases in smart cities and possible upgrades required for the transition from traditional vehicular ad hoc networks (VANETs) to VaaS. Then, we will introduce the system architecture of the VaaS paradigm and discuss how it can provide SCCSI services in future smart cities, respectively. At last, we identify the open problems of this paradigm and future research directions, including architectural design, service provisioning, incentive design, and security & privacy. We expect that this paper paves the way towards developing a cost-effective and sustainable approach for building smart cities.Comment: 32 pages, 11 figure

Socially aware microcloud service overlay optimization in community networks

Community networks are a growing network cooperation effort by citizens to build and maintain Internet infrastructure in regions that are not available. Adding that, to bring cloud services to community networks (CNs), microclouds were started as an edge cloud computing model where members cooperate using resources. Therefore, enhancing routing for services in CNs is an attractive paradigm that benefits the infrastructure. The problem is the growing consumption of resources for disseminating messages in the CN environment. This is because the services that build their overlay networks are oblivious to the underlying workload patterns that arise from social cooperation in CNs. In this paper, we propose Select in Community Networks (SELECTinCN), which enhances the overlay creation for pub/sub systems over peer-to-peer (P2P) networks. Moreover, SELECTinCN includes social information based on cooperation within CNs by exploiting the social aspects of the community of practice. Our work organizes the peers in a ring topology and provides an adaptive P2P connection establishment algorithm, where each peer identifies the number of connections needed based on the social structure and user availability. This allows us to propagate messages using a reduced number of hops, thus providing an efficient heuristic to an NP-hard problem that maps the workload graph to the structured P2P overlays resulting in a number of messages close to the theoretical minimum. Experiments show that, by using social network information, SELECTinCN reduces the number of relay nodes by up to 89% using the community of practice information versus the state-of-the-art pub/sub notification systems given as baseline.Peer ReviewedPostprint (author's final draft

Cloud provider capacity augmentation through automated resource bartering

© 2017 Elsevier B.V. Growing interest in Cloud Computing places a heavy workload on cloud providers which is becoming increasingly difficult for them to manage with their primary data centre infrastructures. Resource scarcity can make providers vulnerable to significant reputational damage and it often forces customers to select services from the larger, more established companies, sometimes at a higher price. Funding limitations, however, commonly prevent emerging and even established providers from making a continual investment in hardware speculatively assuming a certain level of growth in demand. As an alternative, they may opt to use the current inter-cloud resource sharing systems which mainly rely on monetary payments and thus put pressure on already stretched cash flows. To address such issues, a new multi-agent based Cloud Resource Bartering System (CRBS) is implemented in this work that fosters the management and bartering of pooled resources without requiring costly financial transactions between IAAS cloud providers. Agents in CRBS collaborate to facilitate bartering among providers which not only strengthens their trading relationships but also enables them to handle surges in demand with their primary setup. Unlike existing systems, CRBS assigns resources by considering resource urgency which comparatively improves customers’ satisfaction and the resource utilization rate by more than 50%. The evaluation results verify that our system assists providers to timely acquire the additional resources and to maintain sustainable service delivery. We conclude that the existence of such a system is economically beneficial for cloud providers and enables them to adapt to fluctuating workloads

A Survey of Green Networking Research

Reduction of unnecessary energy consumption is becoming a major concern in wired networking, because of the potential economical benefits and of its expected environmental impact. These issues, usually referred to as "green networking", relate to embedding energy-awareness in the design, in the devices and in the protocols of networks. In this work, we first formulate a more precise definition of the "green" attribute. We furthermore identify a few paradigms that are the key enablers of energy-aware networking research. We then overview the current state of the art and provide a taxonomy of the relevant work, with a special focus on wired networking. At a high level, we identify four branches of green networking research that stem from different observations on the root causes of energy waste, namely (i) Adaptive Link Rate, (ii) Interface proxying, (iii) Energy-aware infrastructures and (iv) Energy-aware applications. In this work, we do not only explore specific proposals pertaining to each of the above branches, but also offer a perspective for research.Comment: Index Terms: Green Networking; Wired Networks; Adaptive Link Rate; Interface Proxying; Energy-aware Infrastructures; Energy-aware Applications. 18 pages, 6 figures, 2 table

The Value of Community Clouds for Collaboration in the Public Sector

The public sector has discovered cloud computing technologies and therefore demands an adequate cloud provisioning model. The community cloud seems to be a good balance between safety and trust as well as efficiency, cost reduction, and competitiveness for public facilities. Following this presumption, we analyzed the network potential for cooperation in the public sector. First, we reviewed the scientific literature around this concept and clarified the term ‘community cloud’. Then, we conducted a study of network theories to derive common values that are addressed in cooperation. In combination with network characteristics, we developed a framework that characterizes a network and assesses its specific network value. For evaluation purposes, we applied the framework to community cloud implementations in the public sector and discussed the results regarding the network value. The research findings reveal basic network values for community clouds in the public sector and will serve as analysis and assessment guidelines

Exploring the E-science Knowledge Base through co-citation analysis

E-Science is the “science of this age”; it is realized through collaborative scientific enquiry which requires utilization of non-trivial amounts of computing resources and massive data sets. In this paper we explore the e-Science knowledge base through co-citation analysis of extant literature. Our objective is to use the knowledge domain visualization software CiteSpace to identifying the turning point articles and authors. In other words, our analysis is not solely based on tabulating the frequency of co-cited articles and authors, but the identification of landmark articles and authors irrespective of their co-citation count. The dataset for this analysis is downloaded from the ISI Web of Science and includes approx. 1000 articles. It is expected that this paper will be an important source of reference for academics and researchers working in the area of e-Science and its three technology enablers - grid computing, desktop grids and cloud computing

Reliable and energy efficient resource provisioning in cloud computing systems

Cloud Computing has revolutionized the Information Technology sector by giving computing a perspective of service. The services of cloud computing can be accessed by users not knowing about the underlying system with easy-to-use portals. To provide such an abstract view, cloud computing systems have to perform many complex operations besides managing a large underlying infrastructure. Such complex operations confront service providers with many challenges such as security, sustainability, reliability, energy consumption and resource management. Among all the challenges, reliability and energy consumption are two key challenges focused on in this thesis because of their conflicting nature. Current solutions either focused on reliability techniques or energy efficiency methods. But it has been observed that mechanisms providing reliability in cloud computing systems can deteriorate the energy consumption. Adding backup resources and running replicated systems provide strong fault tolerance but also increase energy consumption. Reducing energy consumption by running resources on low power scaling levels or by reducing the number of active but idle sitting resources such as backup resources reduces the system reliability. This creates a critical trade-off between these two metrics that are investigated in this thesis. To address this problem, this thesis presents novel resource management policies which target the provisioning of best resources in terms of reliability and energy efficiency and allocate them to suitable virtual machines. A mathematical framework showing interplay between reliability and energy consumption is also proposed in this thesis. A formal method to calculate the finishing time of tasks running in a cloud computing environment impacted with independent and correlated failures is also provided. The proposed policies adopted various fault tolerance mechanisms while satisfying the constraints such as task deadlines and utility values. This thesis also provides a novel failure-aware VM consolidation method, which takes the failure characteristics of resources into consideration before performing VM consolidation. All the proposed resource management methods are evaluated by using real failure traces collected from various distributed computing sites. In order to perform the evaluation, a cloud computing framework, 'ReliableCloudSim' capable of simulating failure-prone cloud computing systems is developed. The key research findings and contributions of this thesis are: 1. If the emphasis is given only to energy optimization without considering reliability in a failure prone cloud computing environment, the results can be contrary to the intuitive expectations. Rather than reducing energy consumption, a system ends up consuming more energy due to the energy losses incurred because of failure overheads. 2. While performing VM consolidation in a failure prone cloud computing environment, a significant improvement in terms of energy efficiency and reliability can be achieved by considering failure characteristics of physical resources. 3. By considering correlated occurrence of failures during resource provisioning and VM allocation, the service downtime or interruption is reduced significantly by 34% in comparison to the environments with the assumption of independent occurrence of failures. Moreover, measured by our mathematical model, the ratio of reliability and energy consumption is improved by 14%

On service optimization in community network micro-clouds

Cotutela Universitat Politècnica de Catalunya i KTH Royal Institute of TechnologyInternet coverage in the world is still weak and local communities are required to come together and build their own network infrastructures. People collaborate for the common goal of accessing the Internet and cloud services by building Community networks (CNs). The use of Internet cloud services has grown over the last decade. Community network cloud infrastructures (i.e. micro-clouds) have been introduced to run services inside the network, without the need to consume them from the Internet. CN micro-clouds aims for not only an improved service performance, but also an entry point for an alternative to Internet cloud services in CNs. However, the adaptation of the services to be used in CN micro-clouds have their own challenges since the use of low-capacity devices and wireless connections without a central management is predominant in CNs. Further, large and irregular topology of the network, high software and hardware diversity and different service requirements in CNs, makes the CN micro-clouds a challenging environment to run local services, and to achieve service performance and quality similar to Internet cloud services. In this thesis, our main objective is the optimization of services (performance, quality) in CN micro-clouds, facilitating entrance to other services and motivating members to make use of CN micro-cloud services as an alternative to Internet services. We present an approach to handle services in CN micro-cloud environments in order to improve service performance and quality that can be approximated to Internet services, while also giving to the community motivation to use CN micro-cloud services. Furthermore, we break the problem into different levels (resource, service and middleware), propose a model that provides improvements for each level and contribute with information that helps to support the improvements (in terms of service performance and quality) in the other levels. At the resource level, we facilitate the use of community devices by utilizing virtualization techniques that isolate and manage CN micro-cloud services in order to have a multi-purpose environment that fosters services in the CN micro-cloud environment. At the service level, we build a monitoring tool tailored for CN micro-clouds that helps us to analyze service behavior and performance in CN micro-clouds. Subsequently, the information gathered enables adaptation of the services to the environment in order to improve their quality and performance under CN environments. At the middleware level, we build overlay networks as the main communication system according to the social information in order to improve paths and routes of the nodes, and improve transmission of data across the network by utilizing the relationships already established in the social network or community of practices that are related to the CNs. Therefore, service performance in CN micro-clouds can become more stable with respect to resource usage, performance and user perceived quality.Acceder a Internet sigue siendo un reto en muchas partes del mundo y las comunidades locales se ven en la necesidad de colaborar para construir sus propias infraestructuras de red. Los usuarios colaboran por el objetivo común de acceder a Internet y a los servicios en la nube construyendo redes comunitarias (RC). El uso de servicios de Internet en la nube ha crecido durante la última década. Las infraestructuras de nube en redes comunitarias (i.e., micronubes) han aparecido para albergar servicios dentro de las mismas redes, sin tener que acceder a Internet para usarlos. Las micronubes de las RC no solo tienen por objetivo ofrecer un mejor rendimiento, sino también ser la puerta de entrada en las RC hacia una alternativa a los servicios de Internet en la nube. Sin embargo, la adaptación de los servicios para ser usados en micronubes de RC conlleva sus retos ya que el uso de dispositivos de recursos limitados y de conexiones inalámbricas sin una gestión centralizada predominan en las RC. Más aún, la amplia e irregular topología de la red, la diversidad en el hardware y el software y los diferentes requisitos de los servicios en RC convierten en un desafío albergar servicios locales en micronubes de RC y obtener un rendimiento y una calidad del servicio comparables a los servicios de Internet en la nube. Esta tesis tiene por objetivo la optimización de servicios (rendimiento, calidad) en micronubes de RC, facilitando la entrada a otros servicios y motivando a sus miembros a usar los servicios en la micronube de RC como una alternativa a los servicios en Internet. Presentamos una aproximación para gestionar los servicios en entornos de micronube de RC para mejorar su rendimiento y calidad comparable a los servicios en Internet, a la vez que proporcionamos a la comunidad motivación para usar los servicios de micronube en RC. Además, dividimos el problema en distintos niveles (recursos, servicios y middleware), proponemos un modelo que proporciona mejoras para cada nivel y contribuye con información que apoya las mejoras (en términos de rendimiento y calidad de los servicios) en los otros niveles. En el nivel de los recursos, facilitamos el uso de dispositivos comunitarios al emplear técnicas de virtualización que aíslan y gestionan los servicios en micronubes de RC para obtener un entorno multipropósito que fomenta los servicios en el entorno de micronube de RC. En el nivel de servicio, construimos una herramienta de monitorización a la medida de las micronubes de RC que nos ayuda a analizar el comportamiento de los servicios y su rendimiento en micronubes de RC. Luego, la información recopilada permite adaptar los servicios al entorno para mejorar su calidad y rendimiento bajo las condiciones de una RC. En el nivel de middleware, construimos redes de overlay que actúan como el sistema de comunicación principal de acuerdo a información social para mejorar los caminos y las rutas de los nodos y mejoramos la transmisión de datos a lo largo de la red al utilizar las relaciones preestablecidas en la red social o la comunidad de prácticas que están relacionadas con las RC. De este modo, el rendimiento en las micronubes de RC puede devenir más estable respecto al uso de recursos, el rendimiento y la calidad percibidas por el usuario.Postprint (published version