Sensing Materials for Surface Acoustic Wave Chemical Sensors

Online real‐time monitoring of gases requires a miniaturized, passive, and accurate gas sensor. Surface acoustic wave (SAW) devices possess these properties which make them suitable for gas‐sensing applications. They have shown remarkable results in sensing of different gases in terms of sensitivity, selectivity, response, and recovery times. One of the important prerequisites a designer should know is to have knowledge on the different types of sensing material suitable for gas‐sensing applications, prior to design and fabrication of the sensor. Different sensing materials, including metal oxides, polymers, carbon nanotubes, graphene, nanocomposites, etc. have been used for SAW gas sensors. In this article, different sensing materials for SAW gas sensors will be discussed

Nanocomposite Films for Gas Sensing

Nanocomposite films are thin films formed by mixing two or more dissimilar materials having nano-dimensional phase(s) in order to control and develop new and improved structures and properties. The properties of nanocomposite films depend not only on the individual components used but also on the morphology and the interfacial characteristics. Nanocomposite films that combine materials with synergetic or complementary behaviours possess unique physical, chemical, optical, mechanical, magnetic and electrical properties unavailable from that of the component materials and have attracted much attention for a wide range of device applications such as gas sensors.NRC publication: Ye

Applications of aerospace technology to petroleum extraction and reservoir engineering

Through contacts with the petroleum industry, the petroleum service industry, universities and government agencies, important petroleum extraction problems were identified. For each problem, areas of aerospace technology that might aid in its solution were also identified, where possible. Some of the problems were selected for further consideration. Work on these problems led to the formulation of specific concepts as candidate for development. Each concept is addressed to the solution of specific extraction problems and makes use of specific areas of aerospace technology

Gas sensing technologies -- status, trends, perspectives and novel applications

The strong, continuous progresses in gas sensors and electronic noses resulted in improved performance and enabled an increasing range of applications with large impact on modern societies, such as environmental monitoring, food quality control and diagnostics by breath analysis. Here we review this field with special attention to established and emerging approaches as well as the most recent breakthroughs, challenges and perspectives. In particular, we focus on (1) the transduction principles employed in different architectures of gas sensors, analysing their advantages and limitations; (2) the sensing layers including recent trends toward nanostructured, low-dimensional and composite materials; (3) advances in signal processing methodologies, including the recent advent of artificial neural networks. Finally, we conclude with a summary on the latest achievements and trends in terms of applications.Comment: arXiv admin comment: This version has been removed by arXiv administrators as the submitter did not have the rights to agree to the license at the time of submissio

Synthesis and gas sensing properties of inorganic semiconducting, p-n heterojunction nanomaterials

En aquesta tesis utilitzant principalment Aerosol Assited Chemical Vapor Deposition, AACVD, com a metodologia de síntesis d'òxid de tungstè nanoestructurat s'han fabricat diferents sensors de gasos. Per tal d'estudiar la millora en la selectivitat i la sensibilitat dels sensors de gasos basats en òxid de tungstè aquest s'han decorat, via AACVD, amb nanopartícules d'altres òxids metàl·lics per a crear heterojuncions per tal d'obtenir un increment en la sensibilitat electrònica, les propietats químiques del material o bé ambdues. En particular, s'han treballat en diferents sensors de nanofils d'òxid de tungstè decorats amb nanopartícules d'òxid de níquel, òxid de cobalt i òxid d'iridi resultant en sensors amb un gran increment de resposta i selectivitat cap al sulfur d'hidrogen, per a l'amoníac i per a l'òxid de nitrogen respectivament a concentracions traça. A més a més, s'han estudiat els mecanismes de reacció que tenen lloc entre les espècies d'oxigen adsorbides a la superfície del sensor quan interactua amb un gas. I també s'ha treballat en intentar controlar el potencial de superfície de les capes nanoestructurades per tal de controlar la deriva en la senyal al llarg del temps, quan el sensor està operant, a través d'un control de temperatura.En esta tesis utilizando principalmente Aerosol Assited Chemical Vapor Deposition, AACVD, como metodología de síntesis de óxido de tungsteno nanoestructurado se han fabricado diferentes sensores de gases. Para estudiar la mejora en la selectividad y la sensibilidad de los sensores de gases basados en óxido de tungsteno estos se han decorado, vía AACVD, con nanopartículas de otros óxidos metálicos para crear heterouniones para obtener un incremento en la sensibilidad electrónica, las propiedades químicas del material o bien ambas. En particular, se han trabajado en diferentes sensores de nanohilos de óxido de tungsteno decorados con nanopartículas de óxido de níquel, óxido de cobalto y óxido de iridio resultante en sensores con un gran incremento de respuesta y selectividad hacia el sulfuro de hidrógeno, para el amoníaco y para el óxido de nitrógeno respectivamente a concentraciones traza. Además, se han estudiado los mecanismos de reacción que tienen lugar entre las especies de oxígeno adsorbidas en la superficie del sensor cuando interactúa con un gas. Y también se ha trabajado en intentar controlar el potencial de superficie de las capas nanoestructuradas para controlar la deriva en la señal a lo largo del tiempo, cuando el sensor está trabajando, a través de un control de temperatura.In this thesis, using mainly Aerosol Assited Chemical Vapor Deposition, AACVD, as a synthesis methodology for nanostructured tungsten oxide, different gas sensors have been manufactured. To study the improvement in the selectivity and sensitivity of gas sensors based on tungsten oxide, they have been decorated, via AACVD, with nanoparticles of other metal oxides to create heterojunctions to obtain an increase in electronic sensitivity, in the chemical properties of the material or at the same time in both. Particularly, we have worked on different tungsten oxide nanowire sensors decorated with nanoparticles of nickel oxide, cobalt oxide and iridium oxide resulting in sensors with a large increase in response and selectivity towards hydrogen sulfide, for ammonia. and for nitrogen oxide respectively at trace concentrations. In addition, the reaction mechanisms that take place between oxygen species adsorbed on the sensor surface when it interacts with a gas have been also studied. Furthermore, efforts have been put on trying to control the surface potential of the nanostructured layers to control the drift in the signal over time, when operating the sensors, through temperature control

Advancements in microfabricated gas sensors and microanalytical tools for the sensitive and selective detection of odors

In recent years, advancements in micromachining techniques and nanomaterials have enabled the fabrication of highly sensitive devices for the detection of odorous species. Recent efforts done in the miniaturization of gas sensors have contributed to obtain increasingly compact and portable devices. Besides, the implementation of new nanomaterials in the active layer of these devices is helping to optimize their performance and increase their sensitivity close to humans’ olfactory system. Nonetheless, a common concern of general-purpose gas sensors is their lack of selectivity towards multiple analytes. In recent years, advancements in microfabrication techniques and microfluidics have contributed to create new microanalytical tools, which represent a very good alternative to conventional analytical devices and sensor-array systems for the selective detection of odors. Hence, this paper presents a general overview of the recent advancements in microfabricated gas sensors and microanalytical devices for the sensitive and selective detection of volatile organic compounds (VOCs). The working principle of these devices, design requirements, implementation techniques, and the key parameters to optimize their performance are evaluated in this paper. The authors of this work intend to show the potential of combining both solutions in the creation of highly compact, low-cost, and easy-to-deploy platforms for odor monitoringPostprint (published version

In situ sensors for measurements in the global trosposphere

Current techniques available for the in situ measurement of ambient trace gas species, particulate composition, and particulate size distribution are reviewed. The operational specifications of the various techniques are described. Most of the techniques described are those that have been used in airborne applications or show promise of being adaptable to airborne applications. Some of the instruments described are specialty items that are not commercially-available. In situ measurement techniques for several meteorological parameters important in the study of the distribution and transport of ambient air pollutants are discussed. Some remote measurement techniques for meteorological parameters are also discussed. State-of-the-art measurement capabilities are compared with a list of capabilities and specifications desired by NASA for ambient measurements in the global troposphere

Porous Ceramic Sensors: Hydrocarbon Gas Leaks Detection

According to the American National Standards Institute (ANSI), a sensor is a device which provides a usable output in response to a specified measurement of a physical quantity converted into a signal suitable for processing (e.g., optical, electrical, or mechanical signals). On the other hand, porous ceramic materials play an important role as sensor materials, because by selecting a suitable base ceramic material for the intended use and then adjusting their overall porosity, pore size distribution, and pore shape, they can cover different applications such as liquid-gas filters, insulators, catalytic supports, mixed of gases separators and sensors, among others. In addition, they have controlled permeability, high melting point, high superficial area, high corrosion and wear resistance, low expansion coefficient, tailored electronic properties, etc. Currently, a few niche areas demand sensors for compact electronic device design, e.g., leak inspections for oil and gas dispositive, flammable and/or toxic gas detection in waste storage areas and confined spaces, hydrocarbons and their associated gas detection at low temperatures and high humidity conditions, among others. In this chapter, the advances in porous ceramic production for hydrocarbons and associated gas detection will be presented and discussed

Applications of MXenes in human-like sensors and actuators

Human beings perceive the world through the senses of sight, hearing, smell, taste, touch, space, and balance. The first five senses are prerequisites for people to live. The sensing organs upload information to the nervous systems, including the brain, for interpreting the surrounding environment. Then, the brain sends commands to muscles reflexively to react to stimuli, including light, gas, chemicals, sound, and pressure. MXene, as an emerging two-dimensional material, has been intensively adopted in the applications of various sensors and actuators. In this review, we update the sensors to mimic five primary senses and actuators for stimulating muscles, which employ MXene-based film, membrane, and composite with other functional materials. First, a brief introduction is delivered for the structure, properties, and synthesis methods of MXenes. Then, we feed the readers the recent reports on the MXene-derived image sensors as artificial retinas, gas sensors, chemical biosensors, acoustic devices, and tactile sensors for electronic skin. Besides, the actuators of MXene-based composite are introduced. Eventually, future opportunities are given to MXene research based on the requirements of artificial intelligence and humanoid robot, which may induce prospects in accompanying healthcare and biomedical engineering applications. [Figure not available: see fulltext.

Doctor of Philosophy

dissertationMagnetostrictive Fe-Ga and other iron-based alloys are candidates for use in sensing, actuation and large-scale energy harvesting applications. Exposure to aqueous electrochemical environments is anticipated in some of these applications which could potentially introduce hydrogen into the alloy and cause severe ductility reduction due to hydrogen embrittlement. These alloys may also be simultaneously exposed to magnetic field. This study therefore examines the effect of hydrogen and magnetic field on the mechanical behavior of these alloys. This study could also provide an understanding of the relationship between hydrogen embrittlement and magnetoelastic behavior in these alloys. In this work, the effect of hydrogen and magnetic field on the fracture behavior of [100]-oriented Fe-17.5 at.% Ga alloy single crystals and polycrystalline Fe-15 at.% Ga alloy were examined. Three-point bend tests and tensile tests were used to study the fracture behavior. Tests were done in different conditions to understand the effect of hydrogen and magnetic field on the fracture behavior of these materials. Hydrogen loading was done by in-situ electrochemical charging and magnetic field was applied to the samples either by using Nd2Fe14B permanent magnets or by using solenoid coils. Before doing the three-point bend test on the Fe-Ga single crystal samples, tests were done using high-strength AISI 4340 steel to optimize the testing procedures and parameters