Multi-service systems: an enabler of flexible 5G air-interface

Multi-service system is an enabler to flexibly support diverse communication requirements for the next generation wireless communications. In such a system, multiple types of services co-exist in one baseband system with each service having its optimal frame structure and low out of band emission (OoBE) waveforms operating on the service frequency band to reduce the inter-service-band-interference (ISvcBI). In this article, a framework for multi-service system is established and the challenges and possible solutions are studied. The multi-service system implementation in both time and frequency domain is discussed. Two representative subband filtered multicarrier (SFMC) waveforms: filtered orthogonal frequency division multiplexing (F-OFDM) and universal filtered multi-carrier (UFMC) are considered in this article. Specifically, the design methodology, criteria, orthogonality conditions and prospective application scenarios in the context of 5G are discussed. We consider both single-rate (SR) and multi-rate (MR) signal processing methods. Compared with the SR system, the MR system has significantly reduced computational complexity at the expense of performance loss due to inter-subband-interference (ISubBI) in MR systems. The ISvcBI and ISubBI in MR systems are investigated with proposed low-complexity interference cancelation algorithms to enable the multi-service operation in low interference level conditions

Performance Analysis of a 5G Transceiver Implementation for Remote Areas Scenarios

The fifth generation of mobile communication networks will support a large set of new services and applications. One important use case is the remote area coverage for broadband Internet access. This use case ha significant social and economic impact, since a considerable percentage of the global population living in low populated area does not have Internet access and the communication infrastructure in rural areas can be used to improve agribusiness productivity. The aim of this paper is to analyze the performance of a 5G for Remote Areas transceiver, implemented on field programmable gate array based hardware for real-time processing. This transceiver employs the latest digital communication techniques, such as generalized frequency division multiplexing waveform combined with 2 by 2 multiple-input multiple-output diversity scheme and polar channel coding. The performance of the prototype is evaluated regarding its out-of-band emissions and bit error rate under AWGN channel.Comment: Presented in 2018 European Conference on Networks and Communications (EuCNC),18-21 June, 2018, Ljubljana, Sloveni

Architectures and Key Technical Challenges for 5G Systems Incorporating Satellites

Satellite Communication systems are a promising solution to extend and complement terrestrial networks in unserved or under-served areas. This aspect is reflected by recent commercial and standardisation endeavours. In particular, 3GPP recently initiated a Study Item for New Radio-based, i.e., 5G, Non-Terrestrial Networks aimed at deploying satellite systems either as a stand-alone solution or as an integration to terrestrial networks in mobile broadband and machine-type communication scenarios. However, typical satellite channel impairments, as large path losses, delays, and Doppler shifts, pose severe challenges to the realisation of a satellite-based NR network. In this paper, based on the architecture options currently being discussed in the standardisation fora, we discuss and assess the impact of the satellite channel characteristics on the physical and Medium Access Control layers, both in terms of transmitted waveforms and procedures for enhanced Mobile BroadBand (eMBB) and NarrowBand-Internet of Things (NB-IoT) applications. The proposed analysis shows that the main technical challenges are related to the PHY/MAC procedures, in particular Random Access (RA), Timing Advance (TA), and Hybrid Automatic Repeat reQuest (HARQ) and, depending on the considered service and architecture, different solutions are proposed.Comment: Submitted to Transactions on Vehicular Technologies, April 201

Implementing Enhanced MIMO with F-OFDM to Increase System Efficiency for Future 5G Cellular Networks

The upcoming fifth generation of cellular communication system is most likely to be deployed by the year 2020. The new generation of mobile network is expected to have high data rates, low latency and support a huge number of devices. Aside from this, machine type communication (MTC) and internet of things (IoT) are expected to be handled by 5G system in a better and efficient way. For this reason, a number of waveform candidates have been proposed. Filtered orthogonal frequency division multiplexing (F-OFDM) is one of the proposed candidates for 5G systems, which highly resembles to its predecessor that is orthogonal frequency division multiplexing (OFDM). The crucial difference between the two multicarrier waveforms is the use of a well-designed filter. F-OFDM in comparison with OFDM thus provides reduced out of band emission, which enables it to utilize the allocated spectrum efficiently. This research paper provides a brief review of F-OFDM performance with multiple input multiple output (MIMO) implementation. Using MATLAB, the MIMO system with F-OFDM has been tested for different configurations such as SIMO (receive diversity) and MISO (transmit diversity) with different digital modulation schemes including QPSK, 16-QAM, 64-QAM and 256-QAM. The bit error rate (BER) vs the signal to noise ratio (SNR) plots judge the performance of the system

A resource management scheme for multi-user GFDM with adaptive modulation in frequency selective fading channels

The topic is "Low-latency communication for machine-type communication in LTE-A" and need to be specified in more detail.This final project focus on designing and evaluating a resource management scheme for a multi-user generalized frequency division multiplexing (GFDM) system, when a frequency selective fading channel and adaptive modulation is used. GFDM with adaptive subcarrier, sub-symbol and power allocation are considered. Assuming that the transmitter has a perfect knowledge of the instantaneous channel gains for all users, I propose a multi-user GFDM subcarrier, sub-symbol and power allocation algorithm to minimize the total transmit power. This work analyzes the performance of using a specific set of parameters for aligning GFDM with long term evolution (LTE) grid. The results show that the performance of the proposed algorithm using GFDM is closer to the performance of using OFDM and outperforms multiuser GFDM systems with static frequency division multiple access (FDMA) techniques which employ fixed subcarrier allocation schemes. The advantage between GFDM and OFDM is that the latency of the system can be reduced by a factor of 15 if independent demodulation is considered.El objetivo de este proyecto final es el de diseñar y evaluar un esquema para administrar los recursos de un sistema multi-usuario donde se utiliza generalized frequency division multiplexing (GFDM), cuando el canal es de frequencia de desvanecimiento selectivo y se utiliza modulación adaptiva. Consideramos un sistema GFDM con subportadora, sub-símbolo i asignación de potencia adaptiva. Asumiendo que el transmisor conoce perfectamente el estado del canal para todos los usuarios, propongo un algoritmo que asigna los recursos de forma que la potencia total de transmisión es mínima. Este trabajo analiza la eficiencia de utilizar un grupo de parámetros concretos para alinear el sistema GFDM con el sistema de LTE. Los resultados muestran que el comportamiento del algoritmo en GFDM es muy similar al de OFDM, pero mucho mayor que cuando se compara con sistemas de asignación de recursos estáticos.L’objectiu d’aquest projecte final es dissenyar i avaluar un esquema per administrar els recursos per a un sistema multi-usuari fent servir generalized frequency division multiplexing (GFDM), quan el canal es de freqüència esvaniment selectiu i es fa servir modulació adaptativa. Considerem un sistema GFDM amb subportadora, sub-símbol i assignació de potencia adaptativa. Assumint que el transmissor coneix perfectament l’estat del canal per tots els usuaris, proposo un algoritme que assigna els recursos de forma que la potencia total de transmissió es la mínima. Aquest treball analitza l’eficiència de fer servir un grup de paràmetres concrets per tal d’alinear el sistema GFDM amb el sistema de LTE. Els resultats mostren que el comportament de l’algoritme en GFDM es molt similar al de OFDM i que millora bastant els resultats quan el comparem amb sistemes d’assignament de recursos estàtics

Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks

MmWave communications are expected to play a major role in the Fifth generation of mobile networks. They offer a potential multi-gigabit throughput and an ultra-low radio latency, but at the same time suffer from high isotropic pathloss, and a coverage area much smaller than the one of LTE macrocells. In order to address these issues, highly directional beamforming and a very high-density deployment of mmWave base stations were proposed. This Thesis aims to improve the reliability and performance of the 5G network by studying its tight and seamless integration with the current LTE cellular network. In particular, the LTE base stations can provide a coverage layer for 5G mobile terminals, because they operate on microWave frequencies, which are less sensitive to blockage and have a lower pathloss. This document is a copy of the Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr. Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight integration architecture, based on mobile terminals' dual connectivity to LTE and 5G radio access networks, and will evaluate which are the new network procedures that will be needed to support it. Moreover, this new architecture will be implemented in the ns-3 simulator, and a thorough simulation campaign will be conducted in order to evaluate its performance, with respect to the baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz

Conformação de pulso de formas de onda OFDM para a interface aérea 5G

Orientador: Luís Geraldo Pedroso MeloniDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: As formas de onda com multiplexação ortogonal por divisão de freqüência (OFDM) foram utilizadas com sucesso na interface aérea 3GPP LTE para superar a seletividade do canal e proporcionar uma boa eficiência espectral e altas taxas de transmissão de dados. O próximo sistema de comunicações 5G tem como objetivo oferecer suporte a mais serviços do que o antecessor, como comunicações de banda larga móveis, comunicações de tipo máquina e comunicações de baixa latência, e considera muitos outros cenários de aplicação, como o uso de espectro fragmentado. Esta diversidade de serviços com diferentes requisitos não pode ser suportada pela OFDM convencional, pois OFDM configura toda a largura de banda com parâmetros que atendem a um serviço em particular. Além disso, pode ocorrer interferência interportadora (ICI) quando a OFDM convencional é usada com multiplexação assíncrona de múltiplos usuários e isso é devido às altas emissões fora de banda (OOB) das subportadoras e à violação da condição de ortogonalidade do sinal. Portanto, para atender aos requisitos das futuras aplicações sem fio 5G, o desenvolvimento de uma interface aérea inovadora com novas capacidades torna-se necessário, em particular, uma nova forma de onda mais espectralmente ágil do que OFDM capaz de suportar múltiplas configurações, suprimindo efetivamente a interferência entre usuários, e com integração direta com as camadas superiores. Este trabalho centra-se em duas técnicas de conformação de pulsos para reduzir a emissões fora de banda e melhorar o desempenho de formas de onda baseadas em OFDM. A conformação de pulsos pode permitir o uso de parametrizações múltiplas dentro da forma de onda e abandonar os paradigmas rígidos de ortogonalidade e sincronismo com uma degradação de desempenho causada por interferência intersymbol (ISI) e ICI relativamente baixa. A primeira parte aborda um método de modelagem de pulso baseado na filtragem por subportadora para reduzir a emissão fora de banda no transmissor e interferência de canal adjacente (ACI) no receptor. Ele pode ser implementado usando funções de janela e alguns formatos de janela são apresentados nesta parte. O primeiro usa o prefixo cíclico (CP) existente dos símbolos para suavizar as transições abruptas do sinal, portanto, os grandes lóbulos espectrais sinc causados pelos filtros retangulares. Isso garante a compatibilidade retroativa em sistemas que usam OFDM com prefixo cíclico (CP-OFDM). O formato da segunda janela estende o comprimento do CP para reter a capacidade da forma de onda para combater a propagação do atraso do canal. Os efeitos no desempenho do ISI e ICI são estudados em termos de relação de sinal para interferência (SIR) e taxa de erro de bit (BER) usando formas de onda LTE em um cenário de espectro fragmentado multi-usuário. A segunda parte deste trabalho aborda o desenho e análise de filtros para a contenção espectral flexível em transceptores com filtragem baseada em sub-banda. Este filtro, chamado aqui semi-equiripple, exibe melhor atenuação na banda de rejeição para reduzir as interferências entre subbandas do que os filtros equiripple e filtros sinc baseados em janelamento e também possui boas características de resposta ao impulso para reduzir o ISI. O projeto de filtros baseia-se no algoritmo Parks-McClellan para obter diferentes taxas de decaimento da banda de parada e atende a especificações arbitrárias de máscaras de emissão de espectro (SEM) com baixa distorção dentro da banda. Portanto, pode ser útil para obter baixas emissões fora da banda e configurar sub-bandas com parâmetros independentes, uma vez que a interferência assíncrona é contida pelos filtros. São estudadas três distorções de ISI no filtro: espalhamento de símbolos relacionado à causalidade do filtro, ecos de símbolos devido a ondulações na banda e amplificação de ISI devido a amostras de valores anômalas nas caudas de sua resposta de impulso. O desempenho do filtro é avaliado em termos de densidade de espectro de potência (PSD) e conformidade com SEMs, taxa de erro de modulação (MER) e operação em um esquema assíncrono multi-serviço usando uma única forma de onda. O SIR e o efeito da filtragem na precisão da modulação são avaliados usando formas de onda OFDM ISDB-T e LTE. Estruturas de hardware flexíveis também são propostas para implementações reais. Os resultados mostram que esses métodos de conformação de pulso permitem que a forma de onda explore os fragmentos de espectro disponíveis e ofereça suporte a múltiplos serviços sem uma penalidade de desempenho significativa, o que pode permitir uma interface aérea mais flexívelAbstract: Orthogonal frequency division multiplexing (OFDM) waveforms have been used successfully in the 3GPP Long Term Evolution (LTE) air interface to overcome the channel selectivity and to provide good spectrum efficiency and high transmission data rates. The forthcoming 5G communication system aims to support more services than its predecessor, such as enhanced mobile broadband, machine-type communications and low latency communications, and considers many other application scenarios such as the fragmented spectrum use. This diversity of services with different requirements cannot be supported by conventional OFDM since OFDM configures the entire bandwidth with parameters attending one service in particular. Also, substantial intercarrier interference (ICI) can occur when conventional OFDM is used with asynchronous multiuser multiplexing and this is due to the high out-of-band (OOB) emissions of the subcarriers and the violation of the signal orthogonality constraint. Therefore, to meet the requirements of future 5G wireless applications, the development of an innovative air interface with new capabilities becomes necessary, in particular, a new waveform more spectrally agile than OFDM capable of supporting multiple configurations, suppressing the inter-user interference effectively, and with straightforward integration with the upper layers. This work focuses on two pulse shaping techniques to reduce the OOB emission and improve the in-band and OOB performances of OFDM-based waveforms. Pulse shaping can enable the use of multiple parameterizations within the waveform and abandon the strict paradigms of orthogonality and synchronism with relatively low performance degradation caused by intersymbol interference (ISI) and ICI. The first part addresses a pulse shaping method based on per-subcarrier filtering to reduce both OOB emission in the transmitter and adjacent channel interference (ACI) in the receiver. It can be implemented using window functions and some window formats are presented in this part. The first uses the existing cyclic prefix (CP) of OFDM symbols to smooth abrupt transitions of the signal, thus the large sinc spectral sidelobes caused by the rectangular filters. This guarantees backwards compatibility in systems using conventional cyclic prefixed OFDM (CP-OFDM). The second window format extends the CP length to retain the waveform ability to combat channel delay spread. The effects on performance of ISI and ICI are studied in terms of the signal to interference ratio (SIR) and bit error rate (BER) using LTE waveforms in a multi-user fragmented spectrum scenario. The second part of this work addresses the design and analysis of a filters for flexible spectral containment in subband-based filtering transceivers. This filter, called here semi-equiripple, exhibits better stopband attenuation to reduce the inter-subband interferences than equiripple and windowed truncated sinc filters and also has good impulse response characteristics to reduce ISI. The design is based on the Parks-McClellan algorithm to obtain different stopband decay rates and meet arbitrary spectrum emission masks (SEM) specifications with low in-band distortion. Therefore, it can be useful to achieve low OOB emission and configure subbands with independent parameters since the asynchronous interference is contained by the filters. Three ISI distortions in the filter are studied: symbol spreading related to the filter causality, symbol echoes due to in-band ripples, and ISI amplification due to outlier samples in the tails of its impulse response. The performance of the filter is assessed in terms of the power spectrum density (PSD) and compliance with tight SEMs, modulation error rate (MER) and operation in a multi-service asynchronous scheme using a single waveform. The SIR and the effect of filtering on the modulation accuracy are evaluated using OFDM ISDB-T and LTE waveforms. Flexible hardware structures are also proposed for actual implementations. The results show that these pulse shaping methods enable the waveform to exploit the available spectrum fragments and support multiple services without significant performance penalty, which can allow a more flexible air interfaceMestradoTelecomunicações e TelemáticaMestre em Engenharia ElétricaCAPE