61 research outputs found

    High resolution source localization in near field sensor arrays by MVDR technique

    Get PDF
    Research over the last decade has led to technological advances in high frequency active and passive detection technology and signal processing. An emerging application area is the standoff detection of concealed objects such as weapons and explosives using penetrating electromagnetic radiation such as terahertz waves (THz). Here sensor arrays are employed in the near field to image the concealed objects. A new approach is investigated to improve upon methods such as Fourier inversion and sum and delay beamforming. A method based on the Minimum Variance Distortionless Response (MVDR) filter technique is developed to localize source points in the electric field coming from a subject. To pinpoint near field sources with precision, this MVDR routine calculates filter responses along a plane that has direction of arrival angle and range axes. To understand its limitations, this new method is tested for angular resolution in various directions of arrival, ranges, and SNR levels. The results show that this technique has potential to accurately detect closely spaced point sources when only a few sensors are used to collect measurements

    Development of passive bistatic radars based on orthogonal frequency-division multiplexing modulated signals for short and medium range surveillance

    Get PDF
    The main activity conducted during the research activity is the development of PBR systems based on OFDM signals of opportunity. In particular, a DAB based PBR for air traffic control (ATC) applications and a DVB-T based PBR for maritime surveillance have been objects of study

    Direction of Arrival Estimation and Tracking with Sparse Arrays

    Get PDF
    Direction of Arrival (DOA) estimation and tracking of a plane wave or multiple plane waves impinging on an array of sensors from noisy data are two of the most important tasks in array signal processing, which have attracted tremendous research interest over the past several decades. It is well-known that the estimation accuracy, angular resolution, tracking capacity, computational complexity, and hardware implementation cost of a DOA estimation and/or tracking technique depend largely on the array geometry. Large arrays with many sensors provide accurate DOA estimation and perfect target tracking, but they usually suffer from a high cost for hardware implementation. Sparse arrays can yield similar DOA estimates and tracking performance with fewer elements for the same-size array aperture as compared to the traditional uniform arrays. In addition, the signals of interest may have rich temporal information that can be exploited to effectively eliminate background noise and significantly improve the performance and capacity of DOA estimation and tracking, and/or even dramatically reduce the computational burden of estimation and tracking algorithms. Therefore, this thesis aims to provide some solutions to improving the DOA estimation and tracking performance by designing sparse arrays and exploiting prior knowledge of the incident signals such as AR modeled sources and known waveforms. First, we design two sparse linear arrays to efficiently extend the array aperture and improve the DOA estimation performance. One scheme is called minimum redundancy sparse subarrays (MRSSA), where the subarrays are used to obtain an extended correlation matrix according to the principle of minimum redundancy linear array (MRLA). The other linear array is constructed using two sparse ULAs, where the inter-sensor spacing within the same ULA is much larger than half wavelength. Moreover, we propose a 2-D DOA estimation method based on sparse L-shaped arrays, where the signal subspace is selected from the noise-free correlation matrix without requiring the eigen-decomposition to estimate the elevation angle, while the azimuth angles are estimated based on the modified total least squares (TLS) technique. Second, we develop two DOA estimation and tracking methods for autoregressive (AR) modeled signal source using sparse linear arrays together with Kalman filter and LS-based techniques. The proposed methods consist of two common stages: in the first stage, the sources modeled by AR processes are estimated by the celebrated Kalman filter and in the second stage, the efficient LS or TLS techniques are employed to estimate the DOAs and AR coefficients simultaneously. The AR-modeled sources can provide useful temporal information to handle cases such as the ones, where the number of sources is larger than the number of antennas. In the first method, we exploit the symmetric array to transfer a complex-valued nonlinear problem to a real-valued linear one, which can reduce the computational complexity, while in the second method, we use the ordinary sparse arrays to provide a more accurate DOA estimation. Finally, we study the problem of estimating and tracking the direction of arrivals (DOAs) of multiple moving targets with known signal source waveforms and unknown gains in the presence of Gaussian noise using a sparse sensor array. The core idea is to consider the output of each sensor as a linear regression model, each of whose coefficients contains a pair of DOAs and gain information corresponding to one target. These coefficients are determined by solving a linear least squares problem and then updating recursively, based on a block QR decomposition recursive least squares (QRD-RLS) technique or a block regularized LS technique. It is shown that the coefficients from different sensors have the same amplitude, but variable phase information for the same signal. Then, simple algebraic manipulations and the well-known generalized least squares (GLS) are used to obtain an asymptotically-optimal DOA estimate without requiring a search over a large region of the parameter space

    New Approach of Indoor and Outdoor Localization Systems

    Get PDF
    Accurate determination of the mobile position constitutes the basis of many new applications. This book provides a detailed account of wireless systems for positioning, signal processing, radio localization techniques (Time Difference Of Arrival), performances evaluation, and localization applications. The first section is dedicated to Satellite systems for positioning like GPS, GNSS. The second section addresses the localization applications using the wireless sensor networks. Some techniques are introduced for localization systems, especially for indoor positioning, such as Ultra Wide Band (UWB), WIFI. The last section is dedicated to Coupled GPS and other sensors. Some results of simulations, implementation and tests are given to help readers grasp the presented techniques. This is an ideal book for students, PhD students, academics and engineers in the field of Communication, localization & Signal Processing, especially in indoor and outdoor localization domains

    Abstracts on Radio Direction Finding (1899 - 1995)

    Get PDF
    The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion

    Interferometric Synthetic Aperture Sonar Signal Processing for Autonomous Underwater Vehicles Operating Shallow Water

    Get PDF
    The goal of the research was to develop best practices for image signal processing method for InSAS systems for bathymetric height determination. Improvements over existing techniques comes from the fusion of Chirp-Scaling a phase preserving beamforming techniques to form a SAS image, an interferometric Vernier method to unwrap the phase; and confirming the direction of arrival with the MUltiple SIgnal Channel (MUSIC) estimation technique. The fusion of Chirp-Scaling, Vernier, and MUSIC lead to the stability in the bathymetric height measurement, and improvements in resolution. This method is computationally faster, and used less memory then existing techniques

    Direction of Arrival Estimation in Low-Cost Frequency Scanning Array Antenna Systems

    Get PDF
    RÉSUMÉ Cette thèse propose des méthodes d'estimation de la direction d'arrivée (DOA) et d'amélioration de la résolution angulaire applicables aux antennes à balayage de fréquence (Frequency Scanning Antenna ou FSA) et présente un développement analytique et des confirmations expérimentales des méthodes proposées. Les FSA sont un sous-ensemble d'antennes à balayage électronique dont l'angle du faisceau principal change en faisant varier la fréquence des signaux. L'utilisation des FSA est un compromis entre des antennes à balayage de phase (phased arrays antennas) plus coûteuses et plus complexes, et des antennes à balayage mécanique plus lentes et non agiles. Bien que l'agilité et le faible coût des FSA les rendent un choix plausible dans certaines applications, les FSA à faible coût peuvent ne pas être conformes aux exigences souhaitées pour l'application cible telles que les exigences de résolution angulaire. Ainsi, cette recherche tente d'abord de caractériser les capacités de résolution angulaire de certains systèmes d'antennes FSA sélectionnés. Elle poursuit en explorant des modifications ou extensions aux algorithmes de super-résolution capables d'améliorer la résolution angulaire de l'antenne et de les adapter pour être appliqués aux FSA. Deux méthodes d'estimation de la résolution angulaire, l'estimation du maximum de vraisemblance (Maximum Likelihood ou ML) et la formation du faisceau de variance minimale de Capon (Minimum Variance Beamforming ou MVB) sont étudiées dans cette recherche. Les deux méthodes sont modifiées pour être applicables aux FSA. De plus, les méthodes d'étalonnage et de pré-traitement requises pour chaque méthode sont également introduites. Les résultats de simulation ont montré qu'en sélectionnant des paramètres corrects, il est possible d'améliorer la résolution angulaire au-delà de la limitation de la largeur de faisceau des FSA en utilisant les deux méthodes. Les critères pour lesquels chaque méthode fonctionne le mieux sont discutés et l'analyse pour justifier les conditions présentées est donnée.----------ABSTRACT This research investigates direction of arrival (DOA) estimation and angular resolution enhancement methods applicable to frequency scanning antennas (FSA) and provides analytical development and experimental validation for the proposed methods. FSAs are a subset of electronically scanning antennas, which scan the angle of their main beam by varying the frequency of the signals. Using FSA is a trade-off between more expensive and complex phase array antennas and slower and non-agile mechanical scanning antennas. Although agility and low-cost of FSAs make them a plausible choice in some application, low-cost FSAs may not comply with the desired requirements for the target application such as angular resolution requirements. Thus, this research attempts to first characterize the angular resolution capabilities of some selected FSA antenna systems, and then modify or extend super-resolution algorithms capable of enhancing the angular resolution of the antenna and adapt them to be applied to FSAs. Two angular resolution estimation methods, maximum likelihood estimation (ML) and Capon minimum variance beamforming (MVB), are studied in this research. Both methods are modified to be applicable to FSAs. In addition, the calibration and pre-processing methods required for each method are also introduced. Simulation results show that by selecting correct parameters, it is possible to enhance angular resolution beyond the beamwidth limitation of FSAs using both methods. The criteria for which each method performs the best are discussed and an analysis supporting the presented conditions are given. The proposed methods are also validated using the measured antenna radiation pattern of an 8-element FSA which is built based on a composite right/left-handed (CRLH) waveguide. In addition, the experimental results using a beam scanning parabolic reflector antenna using a frequency multiplexed antenna feed is given. The design limitations of this antenna reduces the performance of angular resolution enhancement methods. Therefore, a hybrid scanning system combining mechanical and frequency scanning using the beam scanning reflector antenna is also proposed

    The Atmospheric Imaging Radar for High Resolution Observations of Severe Weather

    Get PDF
    Mobile weather radars often utilize rapid scan strategies when collecting obser- vations of severe weather. Various techniques have been used to improve volume update times, including the use of agile and multi-beam radars. Imaging radars, similar in some respects to phased arrays, steer the radar beam in software, thus requiring no physical motion. In contrast to phased arrays, imaging radars gather data for an entire volume simultaneously within the field-of-view of the radar, which is defined by a broad transmit beam. As a result, imaging radars provide update rates significantly exceeding those of existing mobile radars, including phased arrays. The Atmospheric Radar Research Center at the University of Oklahoma is engaged in the design, construction and testing of a mobile imaging weather radar system called the Atmospheric Imaging Radar (AIR).Initial tests performed with the AIR demonstrate the benefits and versatility of utilizing beamforming techniques to achieve high spatial and temporal resolution. Specifically, point target analysis was performed using several digital beamform- ing techniques. Adaptive algorithms allow for the improved resolution and clutter rejection when compared to traditional techniques. Additional experiments were conducted during three severe weather events in Oklahoma, including an isolated cell event with high surface winds, a squall line, and a non-tornadic cyclone. Sev- eral digital beamforming techniques were tested and analyzed, producing unique, simultaneous multi-beam measurements using the AIR.The author made specific contributions to the field of radar meteorology in several areas. Overseeing the design and construction of the AIR was a signif- icant effort and involved the coordination of many smaller teams. Interacting with the members of each group and ensuring the success of the project was a primary focus throughout the venture. Meteorological imaging radars of the past have typically focused on boundary layer or upper atmospheric phenomena. The AIR's primary focus is to collect precipitation data from severe weather. Ap- plying well defined beamforming techniques, ranging from Fourier to adaptive algorithms like robust Capon and Amplitude and Phase Estimation (APES), to precipitation phenomena was a unique effort and has served to advance the use of adaptive array processing in radar meteorology. Exploration of irregular antenna spacing and drawing from the analogies between temporal and spatial process- ing led to the development of a technique that reduced the impact of grating lobes by unwrapping angular ambiguities. Ultimately, the author leaves having created a versatile platform capable of producing some of the highest resolution weather data available in the research community today, with opportunities to significantly advance the understanding of rapidly evolving weather phenomena and severe storms
    • …
    corecore