1,744 research outputs found
Energy-efficient communication system based on nonlinear scattering of standard OFDM signals
Development of miniaturized communication systems for exchanging data over short distances with little power consumption is an actual problem. This problem is solved by such standards as Bluetooth, ZigBee etc. Nowadays for extra size devices with power supply from external electromagnetic field are considered. In the paper we propose using nonlinear scattering effect for reusing energy radiated with standard wireless devices such as mobile phones, access points etc. For proposed solution link budget estimation is given. Performance of different types of receivers in communications system is investigated with both theoretical analysis and simulation
A survey on fiber nonlinearity compensation for 400 Gbps and beyond optical communication systems
Optical communication systems represent the backbone of modern communication
networks. Since their deployment, different fiber technologies have been used
to deal with optical fiber impairments such as dispersion-shifted fibers and
dispersion-compensation fibers. In recent years, thanks to the introduction of
coherent detection based systems, fiber impairments can be mitigated using
digital signal processing (DSP) algorithms. Coherent systems are used in the
current 100 Gbps wavelength-division multiplexing (WDM) standard technology.
They allow the increase of spectral efficiency by using multi-level modulation
formats, and are combined with DSP techniques to combat the linear fiber
distortions. In addition to linear impairments, the next generation 400 Gbps/1
Tbps WDM systems are also more affected by the fiber nonlinearity due to the
Kerr effect. At high input power, the fiber nonlinear effects become more
important and their compensation is required to improve the transmission
performance. Several approaches have been proposed to deal with the fiber
nonlinearity. In this paper, after a brief description of the Kerr-induced
nonlinear effects, a survey on the fiber nonlinearity compensation (NLC)
techniques is provided. We focus on the well-known NLC techniques and discuss
their performance, as well as their implementation and complexity. An extension
of the inter-subcarrier nonlinear interference canceler approach is also
proposed. A performance evaluation of the well-known NLC techniques and the
proposed approach is provided in the context of Nyquist and super-Nyquist
superchannel systems.Comment: Accepted in the IEEE Communications Surveys and Tutorial
Information Transmission using the Nonlinear Fourier Transform, Part III: Spectrum Modulation
Motivated by the looming "capacity crunch" in fiber-optic networks,
information transmission over such systems is revisited. Among numerous
distortions, inter-channel interference in multiuser wavelength-division
multiplexing (WDM) is identified as the seemingly intractable factor limiting
the achievable rate at high launch power. However, this distortion and similar
ones arising from nonlinearity are primarily due to the use of methods suited
for linear systems, namely WDM and linear pulse-train transmission, for the
nonlinear optical channel. Exploiting the integrability of the nonlinear
Schr\"odinger (NLS) equation, a nonlinear frequency-division multiplexing
(NFDM) scheme is presented, which directly modulates non-interacting signal
degrees-of-freedom under NLS propagation. The main distinction between this and
previous methods is that NFDM is able to cope with the nonlinearity, and thus,
as the the signal power or transmission distance is increased, the new method
does not suffer from the deterministic cross-talk between signal components
which has degraded the performance of previous approaches. In this paper,
emphasis is placed on modulation of the discrete component of the nonlinear
Fourier transform of the signal and some simple examples of achievable spectral
efficiencies are provided.Comment: Updated version of IEEE Transactions on Information Theory, vol. 60,
no. 7, pp. 4346--4369, July, 201
Green radio communication networks applying radio-over-fibre technology for wireless access
Wireless communication increasingly is becoming the first choice link to enter into the global information society. It is an essential part of broadband communication networks, due to its capacity to cover the end-user domain, outdoors or indoors. The use of mobile phones and broadband has already exceeded the one of the fixed telephones and has caused tremendous changes in peoples life, as not only to be recognised in the current political overthrows. The all-around presence of wireless communication links combined with functions that support mobility will make a roaming person-bound communication network possible in the near future. This idea of a personal network, in which a user has his own communication environment available everywhere, necessitates immense numbers of radio access points to maintain the wireless links and support mobility.
The progress towards “all-around wireless” needs budget and easily maintainable radio access points, with simplified signal processing and consolidation of the radio network functions in a central station. The RF energy consumption in mobile base stations is one of the main problems in the wireless communication system, which has led to the worldwide research in so called green communication, which offers an environmentally friendly and cost-effective solution. In order to extend networks and mobility support, the simplification of antenna stations and broadband communication capacity becomes an increasingly urgent demand, also the extension of the wireless signal transmission distance to consolidate the signal processing in a centralised site.
Radio-over-Fibre technology (RoF) was considered and found to be the most promising solution to achieve effective delivery of wireless and baseband signals, also to reduce RF energy consumption. The overall aim of this research project was to simulate the transmission of wireless and baseband RF signals via fibre for a long distance in high quality, consuming a low-power budget. Therefore, this thesis demonstrated a green radio communication network and the advantage of transmitting signals via fibre rather than via air. The contributions of this research work were described in the follows:
Firstly, a comparison of the power consumption in WiMAX via air and fibre is presented. As shown in the simulation results, the power budget for the transmission of 64 QAM WiMAX IEEE 802.16-2005 via air for a distance of 5km lies at -189.67 dB, whereas for the transmission via RoF for a distance of 140km, the power consumption ranges at 65dB. Through the deployment of a triple symmetrical compensator technique, consisting of SMF, DCF and FBG, the transmission distance of the 54 Mbps WiMAX signal can be increased to 410km without increasing the power budget of 65dB. An amendment of the triple compensator technique to SMF, DCF and CFBG allows a 120Mbps WiMAX signal transmission with a clear RF spectrum of 3.5 GHz and constellation diagram over a fibre length of 792km using a power budget of 192dB. Secondly, the thesis demonstrates a simulation setup for the deployment of more than one wireless system, namely 64 QAM WiMAX IEEE 802.16-2005 and LTE, for a data bit rate of 1Gbps via Wavelength Division Multiplexing (WDM) RoF over a transmission distance of 1800km. The RoF system includes two triple symmetrical compensator techniques - DCF, SMF, and CFBG - to obtain a large bandwidth, power budget of 393.6dB and a high signal quality for the long transmission distance. Finally, the thesis proposed a high data bit rate and energy efficient simulation architecture, applying a passive optical component for a transmission span up to 600km. A Gigabit Optical Passive Network (GPON) based on RoF downlink 2.5 Gbps and uplink 1.25Gbps is employed to carry LTE and WiMAX, also 18 digital channels by utilising Coarse Wavelength Division Multiplexing (CWDM). The setup achieved high data speed, a low-power budget of 151.2dB, and an increased service length of up to 600km
Visible Light Communication (VLC)
Visible light communication (VLC) using light-emitting diodes (LEDs) or laser diodes (LDs) has been envisioned as one of the key enabling technologies for 6G and Internet of Things (IoT) systems, owing to its appealing advantages, including abundant and unregulated spectrum resources, no electromagnetic interference (EMI) radiation and high security. However, despite its many advantages, VLC faces several technical challenges, such as the limited bandwidth and severe nonlinearity of opto-electronic devices, link blockage and user mobility. Therefore, significant efforts are needed from the global VLC community to develop VLC technology further. This Special Issue, “Visible Light Communication (VLC)”, provides an opportunity for global researchers to share their new ideas and cutting-edge techniques to address the above-mentioned challenges. The 16 papers published in this Special Issue represent the fascinating progress of VLC in various contexts, including general indoor and underwater scenarios, and the emerging application of machine learning/artificial intelligence (ML/AI) techniques in VLC
Chip-based Brillouin processing for carrier recovery in coherent optical communications
Modern fiber-optic coherent communications employ advanced
spectrally-efficient modulation formats that require sophisticated narrow
linewidth local oscillators (LOs) and complex digital signal processing (DSP).
Here, we establish a novel approach to carrier recovery harnessing large-gain
stimulated Brillouin scattering (SBS) on a photonic chip for up to 116.82
Gbit/sec self-coherent optical signals, eliminating the need for a separate LO.
In contrast to SBS processing on-fiber, our solution provides phase and
polarization stability while the narrow SBS linewidth allows for a
record-breaking small guardband of ~265 MHz, resulting in higher
spectral-efficiency than benchmark self-coherent schemes. This approach reveals
comparable performance to state-of-the-art coherent optical receivers without
requiring advanced DSP. Our demonstration develops a low-noise and
frequency-preserving filter that synchronously regenerates a low-power
narrowband optical tone that could relax the requirements on very-high-order
modulation signaling and be useful in long-baseline interferometry for
precision optical timing or reconstructing a reference tone for quantum-state
measurements.Comment: Part of this work has been presented as a postdealine paper at CLEO
Pacific-Rim'2017 and OSA Optic
- …